How to Make Twin Motor ATR-72 600 RC Plane Part 4 and Maiden Flight

Before maiden flight, we need to finish the aircraft with few steps, like making a battery hatch door, maintenance hatch door, marking the CG position, attaching control horns and pushrods. Maiden flight was scheduled on last Saturday but failed because one of the ESC is different and causing different speed from each motor. It finally flew well on Monday and Tuesday after both ESC were replaced
#rcplane #rcairliner #diyrcplane #atr72
You can download the plans on the link below :
paper-replika.com/index.php?op...
Part 1 : • How to Make Twin Motor...
Part 2 : • How to Make Twin Motor...
Part 3 : • How to Make Twin Motor...
Part 4 & Maiden : • How to Make Twin Motor...
SUBSCRIBE dan Like untuk support channel ini
Playlist :
00:51 Battery Hatch and Cable Hatch Door
05:40 Cable, Horn and Pushrod
09:56 CG, Battery Tray and Accessories
12:09 Maiden Flight
21:02 Closing
Specs :
1. Wingspan 180 cm / 70.9 inches
2. Flying weight : 1800 gram / 63.5 oz
3. Wing loading : 46.5 g.dm2 / 15.2 oz/sq.ft
4. Wing cube loading : 7.5
5. Wing Area 38.7 dm2 - 600 sq.in
Electronics
- 2X Turnigy 2826 1400kv motor
- 2X ESC 40A
- 1X / 2X Battery Lipo 3S 2200mah / Li-ion 3S 3300 mah
- 4 metal gear 9 gram servos
- 3 plastic gear 9 gram servos
- Propeller : 7x4x3
Materials :
1. 5mm Depron/ Polyfoam
2. 3mm Plywood

[@RCHeliJet]

Fantastic Work and it fly very well, thumb up.

[@JuliusPerdana]

thank you :)

[@survems]

honest, mesmerizing , wonderful craftsmanship !

[@barqwoof]

Beautiful build and spectacular flying with tall growth near your flying field. Congratulations! Jim

[@JuliusPerdana]

thank you Jim

[@faridalfadil5988]

Waaoow...!!!
Bener2 mantap dan keren om..take off dan landing oke juga tu om ..mulus banget T O P .BGT Pokoknya..!!!

[@JuliusPerdana]

terima kasih

[@aarif0609]

Loved the entire playlist of this video, you should also have some one take the flight footage in air with someone who can maneuver the drone, drone shots are going to be awesome for a scale like this, very nice build.

[@mirzawaseem2006]

Julius i m really impressed of your work. You really deserve appreciation. This is one project which is of another level. Bravo.... plz make a 737 or 777 and share the plan as you normally do. I m waiting very anxiously for that. Congrats once again.

[@JuliusPerdana]

ok and thank you

[@TheRCPilotsLog]

Congratulations Julius! Great airplane! I have enjoyed following the build and building along! I am looking forward to finishing mine! I will maiden it before covering because I’m not sure it will fly well 😁👍🏻

[@JuliusPerdana]

okay, looking forward for it, thanks btw

[@Ka0145]

Beautiful bird enjoy watching the build keep up the good work

[@crashrr2993]

That first landing...!!!! Well done!👍🍻

[@tomheetderks9997]

Nice work! You have great talent as a designer and builder. I am not so good, but my ducted fan jets have worked out very well, propeller planes not quite as good. It's hard work, but so rewarding when a build ends up flying well and looking great in the air!

[@JuliusPerdana]

thank you thank you

[@angelreading5098]

Julius well done you got there in the end and well saved with that aft centre of gravity,very long moment arm so quite sensitive fore and aft but the flaps look effective.
I like your functional builds of interesting aircraft,thank you from a fellow model flyer in the UK.

[@JuliusPerdana]

thank you :), yeah almost.. almost crash

[@digranni128]

Congratulations Julius , you have a powerful gift 👍

[@JuliusPerdana]

thank you

[@bearospaceinsider5250]

looks like a joy to fly once you got the CG correct!! just found your channel, and love your builds!!

[@JuliusPerdana]

thank you

[@goncalosantos1260]

Meu amigo, é uma delícia ver os seus vídeos. Tanto que se aprende consigo. Obrigado pela partilha e continuação de grandes e bons projetos. Abraço de Portugal.

[@walk4718]

Great job, including flying off such a challenging field

[@JuliusPerdana]

thank you :)

[@stanleydsouza6723]

One of my favourite channel RC Projects by Sir Julius..We Aeromodelling enthusiasts pray for your great success, ambitions, joy..God Bless you Sir 🙏 😊

[@yulinakamura9918]

Baru nonton spertinya saya suka. Membuat sendiri terlihat lebih asik yah bos, butuh kesabaran n ketelitian. Saya ungin belajar membuat pesawat rc seperti ini.

[@JuliusPerdana]

silakan, semoga membantu. Terima kasih komennya kak

[@duorandom8947]

Wah chanel bermanfaat begini yang harusnya banyak yang tau,semangat terus gan dalam berkarya,gue dukung terus chanel lu 👌👌👌

[@JuliusPerdana]

terima kasih, saya baru mulai serius update tiap minggu 2 bulanan ini. Jadi masih tiarap blom banyak yang tau, semoga nanti makin banyak type pesawat tiap minggu makin banyak yg tau

[@yngve6640]

Hello from Norway. You are a magic with your handy work. And your plane flew beautiful. I like your videos. Happy days.

[@JuliusPerdana]

thank you

[@joserolandsancheromero4440]

Me encanta tu trabajo y la excelente calidad que le pones!! 👏👏👏👏👏

[@JuliusPerdana]

thanks

[@comandantefernandful]

Parabens estou no brasil e babando de tao lindo o atr voa bem de mais e o piloto é bom

[@MrJohn1966elliott]

Beautiful !!!! Look like Realistic. I love it.

[@JuliusPerdana]

thanks mate

[@januszpolski4228]

Excellent plane, good work!

[@musakirtanete6020]

How to Make Twin Motor ATR-72 600 RC Plane Part 4 and Maiden Flight mntap bnget

[@JuliusPerdana]

trims

[@birdwing98]

15:45 Good job saving the plane with a very good landing considering CG error.

[@JuliusPerdana]

i was lucky, the wind was not strong yet.

[@e30kitty]

@@JuliusPerdana You are very tallented guy. Building and flying is top :)

[@zenkustik9786]

Sangat bermanfaat channel-nya...makasih bang ilmu nya

[@barajavlog]

Mantap om jul,tetap terus berkarya dengan plan" baru dan tutor nya agar semua org bisa mencitai hobi aeromodeling baik itu pemula maupun yang sudah pro😇

[@JuliusPerdana]

terima kasih dukungannya

[@barajavlog]

Sama sama om jul😇

[@bobmumby845]

Awesome work like how you show mistakes and how to correct them

[@JuliusPerdana]

thanks

[@woodenvideos4312]

Why people dislikes videos? dont like it pass it by.....LOL!!! Amazing bro keep up!!

[@JuliusPerdana]

thanks

[@plewisto]

Great builds. Very impressive.👍

[@JuliusPerdana]

thanks

[@syafri3808]

Bagus pesawat rcnya om luar biasa👍, puas nontonnya dari part 1 - 4. Saya berharap om Julius buat fokker 50🙏

[@jolmansanchez4492]

Admiro mucho todos sus trabajos 🎉 y sus videos geniales

[@iamiam2689]

Nah ini dia yang saya tunggu tunggu dari kemarin 👍👍👍

[@JuliusPerdana]

siap

[@rayhanabdurahman3120]

Akhirnya yang di tunggu-tunggu :) asli ini keren sekali mas👍

[@JuliusPerdana]

terima kasih

[@Gok_Jar]

@@JuliusPerdana bIsa gk sy beli...??

[@avecforte8851]

Amazing work!

[@JuliusPerdana]

thanks

[@MbahRagielChannel]

Mantap gan.. Bagus banget.
Bisa terbang seperti pesawat asli

[@JuliusPerdana]

terima kasih

[@manpinauchanel9907]

Cieee..udah makin cakep..udah makin pede depan kamera.😄😂.mantap om...ditunggu video2 kreatif lainnya..sukses n sehat slalu biar makin banyak karyanya

[@JuliusPerdana]

trims masbro hehehe

[@spetnazer]

Rambutnya baru neh Hu?Ganeengg beuutttttt daaahhh....
Cakeeppp Wawatnya...Gantheng buildernyaaaa...bahagia penontonnya...

[@JuliusPerdana]

hahaha makasih komennya om Ahmad

[@veraastherlea6118]

Ini yg ditunggu2,langsung like, nonton, komen, mantap om sukses selalu, heran masih aja ada yg dislike

[@JuliusPerdana]

hahaha, biarin aja. Ga ada satu video di youtube yang ga ada dislikenya, pasti ada hehehe

[@veraastherlea6118]

@@JuliusPerdana iya juga seh, tp setidaknya menghargai karena membuat itu susahkan om

[@JuliusPerdana]

hehehe awalnya saya mikir gitu, coba deh random pilih video youtube di beranda... pasti ada dislikenya, jadi udah biasa.

[@ilhamoppo5177]

Alhamdulillah sukses...... Amazing...👍🏿👍🏿👍🏿👍🏿

[@JuliusPerdana]

makasih

[@CarminesRCTipsandTricks]

That was quite a good conclusion to this Series! This is an Aircraft that might be more approachable, because of Twin Props instead of expensive EDFs.
The Landing Gear can obviously take hard landings!!
Very clever design! 👍👍
Carmine ✈🚂🚙

[@JuliusPerdana]

thanks

[@abirplays4850]

I am your channel member .l live in Bangladesh .your design is awesome .l try you model.Thank you for free model plane.

[@JuliusPerdana]

you are welcome, thank you for subscribing

[@abirplays4850]

@@JuliusPerdana 1million love ♥️ for you.

[@aldifc8561]

Ditunggu karya selanjutnya... good job

[@JuliusPerdana]

terima kasih, setelah ini saya udah bikin 1 pesawat baru dan 1 pesawat sedang dibuat, subscribe aja biar bisa liat yang baru :)

[@edhysoedtrisna9173]

Mantap om...next bikin pesawat dg livery yg cakep2 ya👍👍👍

[@JuliusPerdana]

siap

[@jalalab497]

Well done artist

[@pauloneto9872]

Pilota pra caralho hein parabéns!!!

[@adbhimasena4013]

Mantab bang Jul..👍👍

[@wesleycorrea9451]

Um espetáculo esse aeromodelo seu ! Parabéns 👍👏👏👏

[@JuliusPerdana]

thank you

[@wesleycorrea9451]

@@JuliusPerdana Friend, my name is Wesley, I live in Brazil, I would like to know how you do to use the 2 engines! And with 1 esc only? make a video showing the electronics! please

[@JuliusPerdana]

Hi Wesley, I use 2 ESCs, you can see the wiring diagram on the link in the description

[@wesleycorrea9451]

@@JuliusPerdana Ok I will see ! thanks

[@charlesbola1971]

Beautiful job congratulations

[@JuliusPerdana]

thank you

[@wahyueko305]

keren banget , sangat stabil , manuver dan gerakan nya sangat mirip aslinya

[@depronicom9193]

Congratulations,good job

[@JuliusPerdana]

thank you

[@jonakemboi8091]

Nice work Julius keep it up

[@JuliusPerdana]

thanks

[@risky9821]

Keren om,, mantappp

[@JuliusPerdana]

terima kasih

[@rakhassy7617]

bagus bang hasilnya, semangat berkarya terus!

[@JuliusPerdana]

terima kasih

[@pauloneto9872]

Parabéns muito bom!!!

[@JuliusPerdana]

thanks

[@isaikhsanto9585]

Mantap terbangnya jadi kepingin buat

[@JuliusPerdana]

mantab, buat aja masbro

[@herlanlasmiono1394]

Mantap om Julius....next dibikin L/G-nya yg bs retract..dijamin makin keren itu ATRnya....

[@JuliusPerdana]

siap

[@JuliusPerdana]

masih belajar

[@capdink]

Wow this is just brilliant. Amazing work. Thanks for sharing.

[@JuliusPerdana]

you are welcome

[@nabatiid9541]

king of aeromodeling from indonesia🥰🥰

[@JuliusPerdana]

wow terima kasih

[@HAY-gy4iv]

I'm from Thailand ❤️❤️

[@JuliusPerdana]

greetings from Indonesia

[@purwoerdiantoro1245]

Hahahhaa.....banyak kemajuan buat presentasinya om julius.....agak santai sekarang.....klo kemarin2 too seriously...dan lebih ganteng......gubraaakkk...hahaha.....sukses teruuusss....mudah2 an ilmunya berguna untuk banyak orang......

[@JuliusPerdana]

terima kasih om Purwo

[@zainhussein1975]

I have no words for you. You are a great craftsman.
Very unfortunate that we have a global corona crisis. Otherwise I would have sent you a ticket for a cool trip to Africa. I am serious

[@JuliusPerdana]

wow, thanks mate

[@zainhussein1975]

Julius Perdana
Have a look at my channel.....since u love planes 😊😊😊

[@JuliusPerdana]

you know what? that's also my dream to have a home cockpit like that. Awesome

[@sofilensjugandoconsofi9651]

Te felicito julius!!!!!!!!!

[@JuliusPerdana]

thank you

[@darulqomarr8450]

Gila sih ini mantul banget, sukses terus bang

[@JuliusPerdana]

trims masbro

[@borneoRC85]

Akhirnya rilis juga ATR72-600...
Eljossto De Airplanoo om Jupe...
Saya ijin sedot Plan nya om yak dan Akan saya bikin juga om...Semoga terealisasi dah...

[@JuliusPerdana]

mantab, bikin juga om

[@Williambatista1976]

Excelente, hermoso

[@Junaproject01]

Mantap om jooos tenan.

[@JuliusPerdana]

trims masbro

[@RIDHOBAGUSNURWINTA]

Mantaappp.. Landing gear pakai kayu yg ringan biar gk bengkok2 om.. As roda pakai paku mungkin kuat hehehe

[@JuliusPerdana]

siap, kalo kaki2nya kuat om, asnya itu yang masalah hehehe

[@msamodelismo95]

parabens belo trabalho muito bom

[@JuliusPerdana]

thank you

[@ferrytaviadi6709]

Mantab om Julius...kalo boleh kasih saran, buka kursus pembuatan aeromodeling, mudah2an bermanfaat om bagi pencinta aeromodeling. makasi om Julius.

[@JuliusPerdana]

terima kasih, ini kan kursus online hehehe

[@poltid]

Mantabs om Jul... Dlm bbrp bulan doang naik smp 8k subscribers.. Sukses om...

[@JuliusPerdana]

trims om dukungannya :D

[@spatulakurek]

very good video. it has been great work.
I'm doing model airplane work in turkey.

[@JuliusPerdana]

thanks

[@hobyrc9467]

Mantull om suhu...👍
salam dari tanjungpinangaeroclub #tac

[@JuliusPerdana]

salam dari NAC cinere juga om :D

[@andrewjambond6251]

Good job bang

[@sarojpatel3892]

Sir really I like this plane but I have doubt in my area only 30A esc and 2212 1000kv availabe can I use this material in this type of. Plane and also can I use 2 blade prop. Instead of 3 blade

[@AICVlog]

mantab bos,,,,aku lagi bikin CN 235 masih proses tapi disambi kerja

[@JuliusPerdana]

mantab

[@AICVlog]

@@JuliusPerdana masih pemula ,,,,

[@franciscogeanbrandao]

Parabéns você é muito creativo mereçe likes

[@gozoom4084]

Bang Julius, saya selalu dukung channel ini, mohon ijin belajar dan copy semua ilmunya ya bang, semoga cannel kita terus berkembang, sehat selalu salam dari Lampung

[@JuliusPerdana]

siap, senang video saya bisa berguna. Terima kasih sudah komen dan nonton

[@hps5089]

Salute, subscribe ah

[@JuliusPerdana]

trima kasih

[@MrDgbeach]

Q. Is there anything you do in particular to make sure the two motors are aligned properly? I'm having trouble getting mine to fly straight.

[@JuliusPerdana]

you need to use the same exact motor and esc. Also you need to calibrate the throttle together. In this plane I use contra rotating propeller. The left one using CCW and right using CW prop

[@irpanirpan9782]

Mantul om

[@JuliusPerdana]

siap, trims

[@AditAntariksa]

kamu bilang salah pasang pun,, aku tetep bilang KEREN 😁😁😁

[@JuliusPerdana]

terima kasih bro

[@iamZairul]

Good job bro

[@JuliusPerdana]

thank you

[@ariscapo]

penggemar biplane tetap sabar menunggu Stearman PT-13 versi kak Julius
Semangat kak

[@JuliusPerdana]

ok sip

[@thesarten007]

Good plane

[@sofilensjugandoconsofi9651]

Hola Julius. Me gustaría que arnés un p-38 . Que es un avión hermoso . Gracias y sigue así!!!!!!!!

[@JuliusPerdana]

ok

[@latifmukardam9848]

Very good work need runway to takeoff and land perfectly

[@JuliusPerdana]

thank you, it's our dream to have concrete runway

[@latifmukardam9848]

@@JuliusPerdana thats good plan what is your next project?

[@JuliusPerdana]

actually I always mentioned about it next project in the end of every video. It's Cessna 172

[@latifmukardam9848]

@@JuliusPerdana ohk thanks

[@samwell_solata]

mantap.. jago banget... 👍👍👍

[@JuliusPerdana]

terima kasih

[@kukuh51bu69]

Mantap, tinggal di produksi om..

[@JuliusPerdana]

wah ngga deh, kapok produksi cuma dapet capek. Buat bikin konten youtube dan dimainin sendiri aja

[@izamejam]

Terbaik Mas!

[@JuliusPerdana]

terima kasih

[@izamejam]

@@JuliusPerdana mas punya pesawat cantik belaka. Attention to details. Cemburu saya melihatnya. Saya minat twin prop. Sangat minat. Saya hanya ada c160 body putih saja.

[@cessptr1454]

cuakep poll👍👍

[@JuliusPerdana]

trims

[@arywido6624]

Smooth

[@JuliusPerdana]

trims

[@h.omuronar1526]

Hocam hayırlı günler
bu servolardan metal dişlilerin konulduğu yerler nereler?
Videoda da göremedim. yazar mısınız?

[@nyongslenterEDnyongslenterED]

Mantap bang

[@JuliusPerdana]

trims

[@muhammadarsyadkenziebnabel3090]

Keeeeerreeeennn

[@gianchannel1593]

Sangat sangat sangat kerreeen bang

[@JuliusPerdana]

terima kasih

[@shufian100]

Keren om, om di halim ada tempat lapangan rc buat aeromodeling buat umum kok Dan diaspal juga

[@JuliusPerdana]

siap, kejauhan, di sini aja deket banyak temen mainnya juga

[@fauzantb463]

Bikin pesawat Airbus A330 batik air

[@JuliusPerdana]

sip

[@andikaadhitianugraha2632]

@@JuliusPerdana sekalian BOEING737 MAX 8 OM

[@jovanbsimorangkir3008]

@@andikaadhitianugraha2632 iya, boeing 737 max 8

[@ariextorres84]

@@JuliusPerdana ingin beli pesawat rc ny...harga ny berapa bang..

[@bambangpurwanto8350]

Kerèn pak Julius.....

[@JuliusPerdana]

terima kasih

[@gameflyingrc]

Wow wow wow

[@JuliusPerdana]

thanks