For all the young bucks who never used a calk gun before Take nozzle off tube of calk use a razor blade and cut the tip of the tube off screw cap back on now your good to go (don’t try to poke through the nozzle or you’ll make it bigger and possibly make mess when due to too much coming out at once especially if you working on these types of expensive wheels 👍🏾
This video was extremely well done, as somebody that never subscribes to anything on TH-cam I’m pleased to say that I subscribed and look forward to more content and inspiration as I build my Model S. Cheers
Dope af thanks for this video. Explanation on point I get every step you said. Will be doing this soon if you guys get an update on how it went. Thanks again for the awesome video.
Good and very informative video. I am doing a face swap on my meisters as we speak. I am going from a 5x112 to a 5x114.3. Although it's not a full rebuild, this video helps alot. Thank you for that. Just one question. Is it recommended to put some kind of lock tite on the bolts attaching the face and the barrels?
Hey Christian, thanks for this video bro! I just went wide and needed to resize my meisters as well. This definitely makes me more comfortable with doing the rebuild myself and not having to ship off my wheels.
Great video, thought you and kaz would have polished the hardware and face before putting it back on. To make them look even more beautiful, good shit guys!
dont know if this has been said already but a good suggestion would to use masking tape for your rachet extensions, it would save your worries of scratching your lips. None the less great vid mate! love the illiminate gang
I wouldnt use tape. Just use the silicon and feather it out to be a nice clean tight seal. I've done it before on my 100 spoke wheels and it leaves a nice clean seal no leak.. If you ever get a chance to look at an wire rim video it will help out.. Just my input.. But came out nice. Gave you a big 👍 up homie
Hey, I Got some rims from Japan and the assembly bolts on the inside is a bit rusty and has corrosion. I was wondering if I can just unscrew them out and put it in evapo-rust and just reinstall them after. That’s fine right? No need to rebead?
I searched to try and find how i can make my bazreia 18x9.5 have a 5 inch lip but this didnt help. No hate! I did learn how to rebuild them :) I'll be doing this my own as well and y'all helped a lot
SinDrifts the offset becomes higher because the center of the wheel width scoots towards the barrel as you widen it. Idk if you can visualize that. Haha but try
One of the most underrated TH-camr Christian keep up the great content
Appreciate that brotha!
Kaz filming skills are so flawless. With the music and angle of the Cinematics is almost like watching a artist painting.
Couldn't have made this video without him haha
We all need friends like Christian and Kaz
❤️
For all the young bucks who never used a calk gun before
Take nozzle off tube of calk use a razor blade and cut the tip of the tube off screw cap back on now your good to go (don’t try to poke through the nozzle or you’ll make it bigger and possibly make mess when due to too much coming out at once especially if you working on these types of expensive wheels
👍🏾
Sun Kevin Dustin n Christian uploaded today. Man what an awesome Sunday. 🙏
Great video guys. Makes me wish I had more car friends around.
Finally! A very detailed video on working on a 3 piece wheel. Just bought work wheels and this helps me understand what I need to do !!
You did a great job telling everyone how’s its done ✅
That's a lot of nuts my dude. So much work for the rims. 🙏
Always nice seeing a home built project for cars. Very nice job to you and Kaz! Just watching the process I enjoyed👍
The time and dedication for this build is awesome I love the commitment! Keep up the good work Christian. 🤘🏼
Y’all are real homies. Damn loyalty at its finest. Good rebuild fam
Love the how to vids. didnt know much about 3 piece wheels before but now i ngo, Keep it up man!
by far one of my fav videos
Me too man!
def explained it alot better than most videos
Easily my favourite car video I’ve watched all month
Love the videos bro love the background sound 💯💯
Thank you!
Absolutely love these type of videos! I learn something new every time.
Forgot to mention guys. You should use loctite on the hardware.
Blue Loctite
I now understand why they’re called ‘3 piece’ wheels thanks to this video.. keep up the good content!
You guys are doing it the right way
James Goins thanks bro!
@@christianngo4736 your content is always on point bro
Such a clean video bro! Thank you! You inspire me everyday. Christian and Kaz both dopest car enthusiast youtubers !
1am in the UK and ill refuse to sleep till i watch your new vid
Highly recommend cleaning all the hardware/faces before re-assembly
This video was extremely well done, as somebody that never subscribes to anything on TH-cam I’m pleased to say that I subscribed and look forward to more content and inspiration as I build my Model S.
Cheers
Nice bro! Saw them angles from Randy's video LOL. Effort paid off.
Dope af thanks for this video. Explanation on point I get every step you said. Will be doing this soon if you guys get an update on how it went. Thanks again for the awesome video.
Cant wait to rebuild my 3 piece wheels. thanks for the informative video. looks super easy!!!
Love the intros bro ! Much love from kentucky !
Good and very informative video. I am doing a face swap on my meisters as we speak. I am going from a 5x112 to a 5x114.3. Although it's not a full rebuild, this video helps alot. Thank you for that.
Just one question. Is it recommended to put some kind of lock tite on the bolts attaching the face and the barrels?
Super dope video got me wanting to pull the trigger on these 3 piece wheels I’ve found! Thanks man
You guys did a great on the three piece rim!
You seem humble and have some informative videos. New Sub!
Christian x Kaz collab = 🔥🔥🔥🔥🔥🔥
Hey Christian, thanks for this video bro! I just went wide and needed to resize my meisters as well. This definitely makes me more comfortable with doing the rebuild myself and not having to ship off my wheels.
Kaz needs to vlog more 😭
Sick video never knew 3 piece wheels where assembled this way.
The results came out amazingly!! Those Meister’s are beautiful! 😍
Hey Christian , sick rims bro awesome job man. And I luv ur WRX DUDE SWEET
This is your quality of content right now. Now imagine when you hit 1 million? Ohh God😭😭😭😭
Great video, thought you and kaz would have polished the hardware and face before putting it back on. To make them look even more beautiful, good shit guys!
Great vid Chris, very informative 👍🏾
Great content as always man and its cool to see how easy/diy these wheels can be to work on
I did not know that they were assembled gave me some good ideas
Let me know what you think Christian. This is need for speed Xbox one.
The 180sx th-cam.com/video/gc7l8WdXYss/w-d-xo.html
Gotta respect the hard work & time💯💙
Great job boiiz! Keep it up Christian! 🔥🔥🔥💯
Nice!! Everyone make sure to watch the adds so our boy can get paid $$$
dont know if this has been said already but a good suggestion would to use masking tape for your rachet extensions, it would save your worries of scratching your lips. None the less great vid mate! love the illiminate gang
Been wanting to do this for so long, keep it up bro
Bro, Christain needs to start a DIY series or something.
actually done very well. very interesting to watch despite the length of the video. great job overall
Subscribing simply for the time and effort put into making this video.
Good work guys
SSR Vienna Kreis faces come out through the front of the wheel 👌🏻
Give this man a 100k subs! LETS GO! Cheers man from PH
Earned yourself another sub brodie! Keep up the rad content my fellow Asian brotha!
Love the vibe in this one man.
Damn, editing on point homey
nicely done fellas
Christian your talented asf bro 💯🌡🔥🔥🔥
Thanks bro ❤️
Hella Great Content 👍 Good Team Work 💯
Antho Villarreal ❤️
i enjoyed the vlog today! and yes kaz needs to vlog more
I’m not sure but I’m assuming that heating the silicone up would help with the removal process as well.
Great job ya two
dont have 3 piece wheels, but love the video man ! Watching in the Netherlands !
Bruh dope video man , keep up the grind man
Dope 👍... Made it look really easy too homie🔥🔥🔥👌
Yee yee! This is the type of content I like to see.
awsome job boiiz 💪🏽
christian your filming skills are on point keep up ;-)
you guys really have the ability~ GOOD!!
This will be your biggest video yet! Calling it!
Thanks bro! I really hope so!
GOOD VID N MUSIC NOW I KNOW A BIT OF THE PROCESS DOPE
I wouldnt use tape. Just use the silicon and feather it out to be a nice clean tight seal. I've done it before on my 100 spoke wheels and it leaves a nice clean seal no leak.. If you ever get a chance to look at an wire rim video it will help out.. Just my input.. But came out nice. Gave you a big 👍 up homie
Hey, I Got some rims from Japan and the assembly bolts on the inside is a bit rusty and has corrosion. I was wondering if I can just unscrew them out and put it in evapo-rust and just reinstall them after. That’s fine right? No need to rebead?
Thats right my boii!! Clean!! Love it 😌😎🤙🏽👌🏽
Some good content. Keep it up 👍🏻
Banger video fam🤟🏽
I searched to try and find how i can make my bazreia 18x9.5 have a 5 inch lip but this didnt help. No hate! I did learn how to rebuild them :) I'll be doing this my own as well and y'all helped a lot
Nice work looks great
I’m not crying you are 😢 good times
By upsizing the barrel aren’t you also lowering offset? I’m thinking of buying my own barrels and lips
SinDrifts the offset becomes higher because the center of the wheel width scoots towards the barrel as you widen it. Idk if you can visualize that. Haha but try
I can say I learned something today !
👌👌👌
What type of silicone did you guys use?
Damn thats dope. Good vid man
I'm restoring a rare 3 piece, 4x1000 volk rays wheel and I'm planning to restore it. Is it okay to use adhesive remover to help remove the silicone?
The Guy Who Likes Cars yeah man it’s not going to eat the metal.
@@Sror3d okay, thank you. :)
i like that! keep it up buddy
Good content makes me wanna get three piece wheels so bad
Appreciate the knowledge 👍always ready to learn 💪
I love your videos bro💯
Love your videos keep making them
3 finger stroke game strong 😎😎😎
Brandon Sao HAHA
Love the videos christian 🔰
Quality content af!! 🔥🔥🔥
Damn this was a sick feel like working on my wheels now 😏
Great content bro
Very nice vid bro
Good job 👏
@17:55 “when your crush accidentally brushes against you”
Got to show that respect👌
Good shit homie thanks for the share