BMW 3 series Spark plug Replacement N20/N26 2011 -2018 F30
ฝัง
- เผยแพร่เมื่อ 26 ส.ค. 2024
- Complete guide on how to replace spark plugs on your 2011-2018 BMW 3 series F30 with the N20/N26 Engine
Parts: 12-12-0-039-664 Spark plugs x4
Tools:
10mm socket: amzn.to/3LVScff
6mm socket: amzn.to/3F7kjGU
7mm socket: amzn.to/3fR2ul4
14mm Sparkplug Socket: amzn.to/3dCIYIk
-Use this socket if you remove the extra top covers
14mm Sparkplug socket: amzn.to/3zpruGX
- Use this socket if you are not going to remove the top covers
3/8" extension wobble: amzn.to/3FvwM7G
3/8 ratchet: amzn.to/3RdiSZV
- I recommend getting a ratchet with a flex head. This provides ease of movement and more flexibility, especially when used with other jobs
1/4 ratchet: amzn.to/3dFXGxY
For the 1/4 ratchet using a flex head is not necessary for this job but, comes in handy for other jobs.
1/4” extension: amzn.to/3LFxxvY
Disclaimer
---The Friendly Mechanic assumes no liability for property damage or injury incurred as a result of any of the information/Reliance contained in this video. The content of this video is available for informational and educational purposes only. Always seek professional advice from your mechanic who has thoroughly inspected your vehicle and can make suggestions or judgements. Every vehicle is different, no two vehicles are the same and every repair will be different. The Friendly mechanic does not guarantee results or give warranties implied or expressed. The use of PPE (personal protective equipment) is always recommended whenever working on/with cars, vehicles, tools, parts and Chemicals of any kind. I always recommend safe and proper work practices when operating/handling power tools, hand tools, parts, liquids, chemicals, automotive lifting devices, stands, electrical equipment and or any portrayed in this video and shall not be used by untrained persons. Any injury, damage, loss of any kind that may result from improper use is the sole responsibility of the user and not myself/The Friendly Mechanic. Any and all information you use in this video shall be used at your own risk.
Thanks for showing how to do it without removing all the extra parts . This is such a great video ,you gave me the confidence to do it my self and save a few hundred bucks lol
I'm glad I was able to save you some extra cash and give you the info needed!
No torx not gap very usefull
Great Video, helped me a lot. Liked and subscribed :)
Thank you for the support! 👍🏼
No dielectric grease? I got that plastic cover off pulled it out under the sway bar. Had to re-seat the connections 3x to get the warning light to go away.
Great video though!! Easy to follow and thorough.
Correct, no dielectric grease. There is no need for it.
Hi. Why no cleaning with compressed air, before looseing the spark plug?
It’s not necessary to replace the spark plugs.
To replace fuel injectors I would definitely blow out with compressed air first.
10mm plastic nuts
I have another question. Do you disconnect the battery when performing this spark plug replacement?
It is not necessary to disconnect the battery for this service. But I would have the key off and vehicle asleep.
The start stop button light should be turned off. This will ensure the vehicle is asleep. Takes about 15 min
Thank you!!!
👊🏼
can you link the e18 socket too?
amzn.to/453I8cJ
Here you go, is it for the triangle brace? This is a half inch socket because those are on pretty tight.
Does each coil have a specific spark plug?
No they can be swapped around. They are not paired in any way.
How come you Said coil 3 is coil 2 ??
What do you call that hook tool you have?
It’s an oversized hook pick. I got mine from a snap on set I bought years ago. I wouldn’t recommend buying it because it’s very expensive and difficult to find by itself. I found one on amazon if you’re interested.
This is a paid affiliate link
amzn.to/47ygSo8
@@friendlymechanic9778Thank you so much!! this is very helpful!