U right man.. the dealer is suck.. never respect our car..they want to done the job fast..but endup.. wrong oil filter.. engine cover not fix properly.. screw missing.. better to start learn +buy some tolls +jake.. n do ourself.!you were shock.. when u safe a lot of cash.!!
Can you please make a video about exactly which points on the car you select to jack it up and which points on the car you place your jack stands I typically put my jack/stands on the edges where the pinch welds are
How did you get your front center bumper piece black like that? I would like to do that to mine but dont want it to look like a hack job by painting it
Plasti dip, sold on a spray can in any auto store, just make sure to mask off very well the front shield and anything else for overspray. It’s removable if you don’t like it.
It should say under the hood, mine has 5w20. 0w20 is really thin almost like water and is mostly used for winter for better flow although i think newer cars are using 0w20 now. Just stick to whats recomended on the car :)
AJITH KRISHNAN if you have you’re vehicles manual it will tell you how many liters or quarts to pour in, mine it said 4.5 And also it will depend what year is your car, www.paulstravelpictures.com/Mitsubishi-Lancer-MIVEC-Engine-Oil-Change-Guide/. Check this link it will tell you the quantity on model and year of the car and how to perform the oil change.
@@SVPractical So on the pinch weld sill?? Didn't look like that in the video, thought it was a chassis rail. Okay then all I will need to do is stabilise the sill so it doesn't bend!
xDiiThy well normally i put the stands on the frame rail, don’t remember why i put them there, it was safe for me check this picture, this is where i locate the stands, you can place them in different places on the frame. Check this out www.google.com/search?q=where+to+place+car+jack+when+changing+tire&tbm=isch&hl=en-us&client=safari&prmd=sinv&hl=en-US&ved=2ahUKEwihlpLZq7LkAhXMC1MKHauUD40QrNwCegUIARCoAQ&biw=414&bih=622#imgrc=mkNTJ5v1n83MXM
![[#2024MAMA] ROSÉ (로제), Bruno Mars - APT. | Mnet 241122 방송](http://i.ytimg.com/vi/dgGqD28J6aQ/mqdefault.jpg)
Honestly a straightforward video
I just bought myself a 2013 mitsubishi lancer es doing my first oil change! Love the car
Sause Tv try to do as much as you can yourself, to save money
SalVaca honest am did everything myself to my work truck its slow but isn't gonna stop me from doing the mods i want
SalVaca where'd you buy the oil adapter drop a link
You know how to reset tpms?
Sause Tv no, probably bad sensor.
I did my first oil change on my lancer es today, your vid helped, thx
AppleBottemGs glad it helped
AppleBottemGs you know how to reset tpms?
Thanks for the video!
U right man.. the dealer is suck.. never respect our car..they want to done the job fast..but endup.. wrong oil filter.. engine cover not fix properly.. screw missing.. better to start learn +buy some tolls +jake.. n do ourself.!you were shock.. when u safe a lot of cash.!!
Can you please make a video about exactly which points on the car you select to jack it up
and which points on the car you place your jack stands
I typically put my jack/stands on the edges where the pinch welds are
youknowho99 That’s a great idea, will try to do, thanks.
@@SVPractical very helpful channel..
I subbed.. plz support also my channel🤝👍😊😊😊
Does anybody know what size is the end cap oil filter wrench?
How did you get your front center bumper piece black like that? I would like to do that to mine but dont want it to look like a hack job by painting it
Plasti dip, sold on a spray can in any auto store, just make sure to mask off very well the front shield and anything else for overspray. It’s removable if you don’t like it.
my lancer shark ex engine is 1.6 which size of oil i should use
thanks
nawar zuhear www.mitsubishicars.com/owners/parts-accessories/value-line-products/recommended-engine-oil
Check this website for the recommended oil.
nawar zuhear if you have your owners manual it tells you also what type of oil to use
@@SVPractical thanks
Where can I find the part that goes on the drain plug? (The little round thing you recommended to replace every time)
Juan Palacios you can find the drain plug gasket on any auto parts store, or online, searching with the vehicle information.
0w20? For the tenperatures where I live, the manual says 20w50...
Fel Ta yeah, for each climate is different, that’s why yo have to follow the manual for which type to use.
@@SVPractical exactly. Manual says 20w50 here in brazil. Buuuut, brazilians incist on 0/5w30
It should say under the hood, mine has 5w20. 0w20 is really thin almost like water and is mostly used for winter for better flow although i think newer cars are using 0w20 now. Just stick to whats recomended on the car :)
@@jiovannyzavala294 5w30 they say... I wanna try 10w40 because I live in a super hot area and use the car allday long(braZil)
How much litter oil in 2.0 L engine lancer 4.5or5 litter
AJITH KRISHNAN if you have you’re vehicles manual it will tell you how many liters or quarts to pour in, mine it said 4.5 And also it will depend what year is your car, www.paulstravelpictures.com/Mitsubishi-Lancer-MIVEC-Engine-Oil-Change-Guide/. Check this link it will tell you the quantity on model and year of the car and how to perform the oil change.
AJITH KRISHNAN
you know how to reset tpms?
Hi Salveca, Where do you place the jack/axle stands? On the side sill or somewhere else?
xDiiThy i place the Jack stands normally where you would place the floor jack to lift the car to change a tire.
@@SVPractical So on the pinch weld sill?? Didn't look like that in the video, thought it was a chassis rail. Okay then all I will need to do is stabilise the sill so it doesn't bend!
xDiiThy yeah if you read your car manual it will tell you where to place the floor jack, usually that’s where i place the jack stands
@@SVPractical At 6:44 your jack stands can be seen on the chassis rail, is this safe?
xDiiThy well normally i put the stands on the frame rail, don’t remember why i put them there, it was safe for me check this picture, this is where i locate the stands, you can place them in different places on the frame. Check this out
www.google.com/search?q=where+to+place+car+jack+when+changing+tire&tbm=isch&hl=en-us&client=safari&prmd=sinv&hl=en-US&ved=2ahUKEwihlpLZq7LkAhXMC1MKHauUD40QrNwCegUIARCoAQ&biw=414&bih=622#imgrc=mkNTJ5v1n83MXM
Hey where did you order the crush washer? I went to three auto parts stores and several washers but not a crush washer.
Ashley Moore www.autozone.com/gaskets/engine-oil-drain-plug-gasket
Ashley Moore any auto parts store if they don’t have it, check online
@@SVPractical Where do you place your jack/axle stands? I see where you placed them is on a hollow section the chassis rail
Are you still using Pennzoil, is it good For Mitsubishi engine???
German Coto yes, I’m still using it without any problems so far. (Knock on wood)
Thanks!
Do you have to replace gasket
Steven c the drain plug gasket, yes, every time you change the oil
Is this only for the lancer or any car in general??
@@anamcdonald6626 any car
Ana McDonald on any car
Din midimidirr