This video is the same as when I mod my airsoft stuff, equally zen and calming, except with the occasional "shit" "ah fuck" "noooooooooooooo" "where did the spring go?" "aaaaaaaahhhhhhhhhhhhh"
Eine weitere exakt und erstklassige Arbeit!!! Sehr detaillierte Umsetzung,aber genau dass machen eure Umbauten so einzigartig!! Weiter so Ihr seid einfach die Besten😀😍💪🏼👍🏼💪🏼
adds a point to clip the mag onto yourself and theoretically will add a little weight to the bottom of the mag to help eject it a little easier should it get hung up a little. The real gun this imitates the Ruger mk IV 22/45 light actually has a tab that is spring loaded to push the mag out which I'm always sad to see they didnt add into the airsoft replicas.
I honestly didn't read the title just clicked because I thought it looked cool. Very surprised when I saw the air and realized it's a toy. It looks so heavy duty and quality made. Very cool
that is one of the nicest ones I have seen, would have been nice to see what it looked like with the Black lower as well. hate to think how much all that lot cost to build it.
Hummmm I think for that case you can get steel internals, and you will need some up grades to that awful hop up . Do it step by step~ and you will see the difference
Usually the problem comes from the fire control group~, I would highly recommend the full CNC control group set from COW COW, the best solution so far....
Can someone tell me what are those extra parts that come with the ctm holster? Also, I experienced a lot of flex with the clamp, it makes the holster tilt whit the weight of the pistol.
it comes to the timing, you will need to swap out your nozzle spring, because with the heavy spring it makes the bolt traveling that much faster in which the nozzle is not able to get released from the bucking (just think the bolt is moving in a insanely fast speed, but the nozzle is not quick enough to react) To solve the problem you will need a harder nozzle spring. hope this helps
@@4UADSmartAirsoft It would be nice to get an exact parts list you used on this build. There is a part you replaced thats not specified up above. Swapped out an aluminum part with a more sturdy metal one, you used a magnet in the video to show (18:22). Not sure whats thats called. So this is why a list would be nice.
Hi want modern ak with picatinny rails all over but I want to have also lot of aftermarket parts I also do not want to pay 500 euro or more.. I know Cyma,Arkturus and high priced Tokyo Marui check also We-tech couse they do quality stuff. Can you recommend or do a video about some ak platform and possible upgrades like buying bare bone and adding folding sticks with cheek riser and picatiny.
It’s a set of screw drivers I found form a hardware store, I love wondering around hardware stores and find ideal tools for my builds~ try it~ with the right tool teaching becomes soooo much fun~~~
Hey! Brazilian fan here, have you guys seen this “new” airsoft brand Rossi? It’s a brazilian brand founded in 1889 producing real and air guns, in 2020 they’ve entered the airsoft scenario, also helping the Brazilian airsoft community acquire Novritsch products like the ssp18 cuz our import laws are a PAIN for airsof. They have some really nice 1911 hi-capa (Black Devil 5.1 and Redwings series) and Glock of their own(R-17), and some very nice AEGs as well! (Neptune pdw, 8” and 10” and some hk-416 as well) Would love to see you guys test it if possible!!!
The Neptunes if I'm not wrong are just a rebranding Rossi made from Specna Arms, so they could re-sell here and changed metal receiver with a polymer one to make the price more affordable since airsoft in Brazil is expensive as f*ck.
That is a regular torch I found in hardware store, a good lighter would do the job just fine too. Check out some hardware store they would have many for you to choose from :D
for budget builds I would highly recommend cowcow hammer and sear set/ action army cnc hop up set/ CTM light weight bolt. With those three parts this gun will out perform the most of pistols
Excellent video. I have a fully upgraded AAP as well. But completely different from yours. It is a shame the original folding stock does not work on this CTM Grip. Hope they upgraded it at some point. Which iron sight are you using in your gun? I couldn't find anywhere! Many thanks.
Sure would be cool if you could do that. There is this one RC truck made by traxxas called the slash, it has such a massive aftermarket community that you can build a complete one with only 3rd party parts. And people have done it.
i really have no reason to watch this, but i also have no reason to click away like i have something better to do. So i watched the whole thing while scrolling down Instagram
This video is the same as when I mod my airsoft stuff, equally zen and calming, except with the occasional "shit" "ah fuck" "noooooooooooooo" "where did the spring go?" "aaaaaaaahhhhhhhhhhhhh"
Dude this is soooooo fucking true lolol When you drop a spring and can seem to find it (we all get extra creative with our mouth)
I know EXACTLY how that feels... lol
Oh yes.... I needed more videos from you guys! Thank you again for everything you guys do for the airsoft community!!!! Keep up the phenomenal work!
More to come!
Eine weitere exakt und erstklassige Arbeit!!!
Sehr detaillierte Umsetzung,aber genau dass machen eure Umbauten so einzigartig!!
Weiter so Ihr seid einfach die Besten😀😍💪🏼👍🏼💪🏼
If boba fett played airsoft this is what his pistol would look like. So cool I can’t wait for my ctm order to get here.
I'm sure you will like it when it arrives!
Does the piece at the bottom of the mag really help for speed?
not really to be honest.....but the look is good lol
adds a point to clip the mag onto yourself and theoretically will add a little weight to the bottom of the mag to help eject it a little easier should it get hung up a little. The real gun this imitates the Ruger mk IV 22/45 light actually has a tab that is spring loaded to push the mag out which I'm always sad to see they didnt add into the airsoft replicas.
Yo i watch you all the time
@@roastedpotatoeswithgarlic You are the man!
Very cool custom! This kind of video is super interesting and it shows the possibilities of customizations in airsoft! :D
Sweet man! Glad you like it! For this case we will certainly make more of those videos!
This video should be titled: How to build an airsoft gun from scratch
Nice video man, I like your style. No bs, just straight to what we want to see👌
Thanks man!
Dudddeeeeeee im so jealous, love the vids, keep em coming
hahahah this now will be called the "jealous series " lol
Love the clicky wheel hopup!
I know right~~~
those upgrades look sick, may have to pick some up
Hahaha have fun man!
This is by far the sweetest aap I've ever seen wasn't to crazy about them till now. Thanks allot like I don't spend enough $ on airsoft.
Join us! and spend more bucks! lol
How did you get the rotary hop up to work? With the ctm receiver mine get stuck on full hop only.
Love this! Hopefully this becomes a series!
Thanks buddy, and good news it already is!
@@4UADSmartAirsoft cant wait for the next video!!
Junge junge du hast ein echt geschicktes Händchen.
Ein sehr cooles costum 😀
Mach weiter so hammer.
:D
i love that this is becoming a regular series, plss do an MWS next
Will do man will put that to the list! and we are also really happy that you guys like this type of video!
I’ll start working on a MWS build very soon 🙂
@@4UADSmartAirsoft i love you guys😘
@@luiswen9437 yesssss
i love this build!
Thanks man, it was fun building it!
Lubricate springs with teflon grease and every moving part with silicone oil. Especially around the hammer set.
I honestly didn't read the title just clicked because I thought it looked cool. Very surprised when I saw the air and realized it's a toy. It looks so heavy duty and quality made. Very cool
its for the folks who can't play with real steel hahaha, but I like it because of the airsoft games I can attend :D
Bro just casually chomping that gum the whole time, dig it.
很欣賞你改槍的技術
謝謝大哥!
that is one of the nicest ones I have seen, would have been nice to see what it looked like with the Black lower as well. hate to think how much all that lot cost to build it.
Thanks buddy and yes I cost quite a bit lol
well compare it to the high capa platform and it was really cheap lmao
I really want to get a WE tech galaxy high capa. What do you think I should do for upgrades?
Hummmm I think for that case you can get steel internals, and you will need some up grades to that awful hop up . Do it step by step~ and you will see the difference
I have some problem with fullauto in short stroke and light blowback unit...Does yours work well?? Need some advice! Thanx
Usually the problem comes from the fire control group~, I would highly recommend the full CNC control group set from COW COW, the best solution so far....
@@4UADSmartAirsoft Yes i have changed but couldn't make it work.. Btw my power source is Co2 hpa
@@ldhrulz Hummmmm maybe you could send a video to our FB fan page, let me take a look and see how I can help :D
@@4UADSmartAirsoft Thanks :) Have a good day!
Not a bad vid, but some narration would have helped a great deal. Since you feel you MUST add music, thanks for keeping it low.
awesome video!!!
Thanks
@@4UADSmartAirsoft i sent you a message thru your website ;) hope you get it.. take care, regards
Where did you buy the lighted target that goes up again after it took hit?
The target came from Acetech
Loved that thank you
Anytime bro!
Looks pretty awesome.
some people hate it lol
Amazing work!
Thank you! Cheers!
Espectacular !! que obra de arte enhorabuena!!
Thanks
Can someone tell me what are those extra parts that come with the ctm holster? Also, I experienced a lot of flex with the clamp, it makes the holster tilt whit the weight of the pistol.
to be honest we don't know too
where i can buy this party pack
I think its just for us
上槍身那個OD綠和紅色超級搭～
我本來已為這個配色會被罵
Shoutout from the Philippines ♥️
Love from Taiwan
@@4UADSmartAirsoft our ship sails sometimes in ports at Kaohsiung and Keelung 😁
very very cool build !
Thanks Nicholas glad you like it!
waouh, thanks a lot, your video and "job" iss o wonderful, marvelous, wealthy for me... hhhaaa, thank you
Thanks for the support too! I enjoy the build too~ fun and relaxing
Does that hop-up only work with the stock bucking and inner barrel?
It works with all tokyo marui gbb barrel and bucking
@@4UADSmartAirsoft do you think the green LOKI hop-up unit will fit with that upper?
@@ScoomEntertainment I think it will, since it fits the stock upper just fine, but I'm not perfectly sure since I don't own one
Actually wondering tho which part of the gun used the original piece?
eventually nothing.....maybe just the sear springs
thank you good job
Welcome 👍
omg，this is beautiful
Thank you buddy! It is a lovely one!
Nice one ✌
Thanks man!
Beautiful pistols airsoft guns. Good manutence. From here Brazil/São Paulo.
Thank you for the love!
Could you tell me which % recoil and nozzle return springs were you using. I have feed problems with hpa adpater unless high 110 psi .
it comes to the timing, you will need to swap out your nozzle spring, because with the heavy spring it makes the bolt traveling that much faster in which the nozzle is not able to get released from the bucking (just think the bolt is moving in a insanely fast speed, but the nozzle is not quick enough to react) To solve the problem you will need a harder nozzle spring. hope this helps
Awesome vid mate. Probably already mentioned somewhere in comments but can you send a list of parts and colours you used for this top build.
www.airsoftworld.net/catalogsearch/result/?q=aap01
@@4UADSmartAirsoft It would be nice to get an exact parts list you used on this build. There is a part you replaced thats not specified up above. Swapped out an aluminum part with a more sturdy metal one, you used a magnet in the video to show (18:22). Not sure whats thats called. So this is why a list would be nice.
請問要客製你影片中的AAP01+CTM TAC Upgrates，請問總共價錢要多少？？會寄香港嗎？？
不好意思~我們目前還不賣槍喔~拍影片而以
How durable are those bolts they look thin and about 70% AIR
So far it still works haha
WOW SO COOL , regards from sweden
Thanks buddy! Love from Taiwan!
Hi want modern ak with picatinny rails all over but I want to have also lot of aftermarket parts I also do not want to pay 500 euro or more.. I know Cyma,Arkturus and high priced Tokyo Marui check also We-tech couse they do quality stuff. Can you recommend or do a video about some ak platform and possible upgrades like buying bare bone and adding folding sticks with cheek riser and picatiny.
I think that will be a good subject to go over! Let me put that to my idea book!
Is it possible to build this gun completely from scratch using only after market parts? (Including the mag)
The spring is gonna be a bitch but yes it is possible
@@4UADSmartAirsoft Aaagh... I knew there would be something! Ok thanks 🤜
Les pièces sont superbe
How do I order from ctm if I’m from the United States it says I need an order number and won’t convert to us $
Hummmm I think it counts as NTD but it does the conversion for you
it's really cool!!
ty for video
*STRONGLY SNIFFIN THE GRIP ATTACHMENTS* in mind:yes smell good
What screwdriver are you using at 26:26?
It’s a set of screw drivers I found form a hardware store, I love wondering around hardware stores and find ideal tools for my builds~ try it~ with the right tool teaching becomes soooo much fun~~~
dayum, what a beauty
Indeed
Hey! Brazilian fan here, have you guys seen this “new” airsoft brand Rossi? It’s a brazilian brand founded in 1889 producing real and air guns, in 2020 they’ve entered the airsoft scenario, also helping the Brazilian airsoft community acquire Novritsch products like the ssp18 cuz our import laws are a PAIN for airsof.
They have some really nice 1911 hi-capa (Black Devil 5.1 and Redwings series) and Glock of their own(R-17), and some very nice AEGs as well! (Neptune pdw, 8” and 10” and some hk-416 as well) Would love to see you guys test it if possible!!!
Hummmm interesting~ We will look into that! Thanks for the heads up man!
The Neptunes if I'm not wrong are just a rebranding Rossi made from Specna Arms, so they could re-sell here and changed metal receiver with a polymer one to make the price more affordable since airsoft in Brazil is expensive as f*ck.
So cool😍
thanks bro
What is that white stuff you are putting on the gun? I see it lubes things but whats the product called?
Its a small workshop who makes the grease super smooth and super nice! sadly he doesn't have a website yet
43 minutes of a pistol i legit hate.. still loved the video :)) 👍
Love and hate at the same time XDDD
What torch are you using and where can i buy?
That is a regular torch I found in hardware store, a good lighter would do the job just fine too. Check out some hardware store they would have many for you to choose from :D
Amazing video. Why did you polish the trigger housing?
it was a plastic wheel to get rid of the old grease :D
Buongiorno fratello,
quanti joules hai guadagnato con tutti questi accessori che hai sostituito?
grazie
The best custom of this litlle backup !! I need one like this so much !!!!
for budget builds I would highly recommend cowcow hammer and sear set/ action army cnc hop up set/ CTM light weight bolt. With those three parts this gun will out perform the most of pistols
Blud just built a whole new gun
The intro is cute
"Airsoft Replicas are not Firearms" - the german legislative would like to know your location.
very nice videos guys!
LOLOLOLOLOLOLOLOL Thanks man! you made mine day!
Beautiful grip! May I know the CTM grip is fit for original AAP folding stock? Thanks!
I was hoping for the same thing, but sadly it does not :(((( this grip is pistol only, unless you use other carbine kits
您好，請問一塊buffer是否2mm嗎？總共裝了三塊？我看好像有射空槍情況，是否會有推不到彈入chamber情況？
Hello 我後來改成墊兩塊, 主要是希望槍還能後定,但得說這組復進簧真的有點硬,用原廠的氣化效果會比較好!
@@4UADSmartAirsoft 這組覆進簧是150%嗎？
@@4UADSmartAirsoft 另外我剛剛斷了擊錘簧，請問我應該買那隻牌子呢？
@@jimmykung8064 感覺差不多在那邊,復進速度很快
@@jimmykung8064 我其實強烈建議買牛牛的不鏽鋼火控組 2000塊雖然很貴但換上以後不只手感變好而且也沒在壞了.....不然我之前換AA01零件換到一度要放棄 (目前身邊的朋友全都換了~也沒出現壞掉的狀況) 傳送門~ 祝好運 www.ruten.com.tw/item/show?22139337613336&_gl=1*10ut7bu*_ga*MTE1MTM2MzA1Mi4xNjU2OTQwNDc1*_ga_2VP4WXLL56*MTY1NzY3ODU1Ny4xOS4xLjE2NTc2ODAyODMuNjA.
Sick!!!!!!!
Yes!
i need a gun, but unfortunetly in Europe/Hungary it is not available.;((
Excellent video. I have a fully upgraded AAP as well. But completely different from yours.
It is a shame the original folding stock does not work on this CTM Grip. Hope they upgraded it at some point.
Which iron sight are you using in your gun? I couldn't find anywhere!
Many thanks.
Thanks buddy! And the sights It also came from ctm as well, you can check out their website!
Very Nice..
Thanks braaa
Can you use normal 1911 grip panels?
It will need some modifications
Wow...beast mode
It is hahaha
Is there a link to this parts kit? Or all the parts you used. Great work this things a beast!
Check out ctm’s website, they got it all, otherwise airsoftword. The link are provided in the description
Luxusní, to chci domu 💝👌👍👍
：）
This is the ASMR i want
Thanks for the love~
is it possible to build this toy with only the 3rd party parts?
slightly hard since there are still quite many stock parts that is needed for the gun to work
Sure would be cool if you could do that.
There is this one RC truck made by traxxas called the slash, it has such a massive aftermarket community that you can build a complete one with only 3rd party parts. And people have done it.
Why not upgrade the trigger?
Because we didn’t have one around
What grease do u use or recommend for metal on metal friction?
WD 40 is actually pretty good, but make sure you don't apply that to plastic
What color was the upper receiver
I suppose they call it Christmas Green
What are the sights called?
CTM aap 01 sights, you can find them from the link we provided!
i really have no reason to watch this, but i also have no reason to click away like i have something better to do.
So i watched the whole thing while scrolling down Instagram
I think we are on the same page lol
Are u a wizzard?
How mich joule does it have
Depends on the bbs you use. But with 0.2g it was shooting around 110 mps
請問槍管內橘色那層要怎麼找啊？ 有名字嗎？
那個好像是隨著槍管附上的跟CTM 問問應該就能找到了
i love it
Thanks bra
Where can i buy those parts?
Contact CTM airsoft please
So where can i get these party packs in tw?
hahaha 這個是老闆特別包給我的~可以去CTM問問這種有沒有賣XDD
Wow🤗
pew pew pew
Would be awesome to see you in some sniper projects as well!
hahahah that is right in my alley :D Will do man~
Is that AAPO1 pistol a plastic or a metal?????
its plastic right out of the box
Tolles Video super umbau Abo abgeben
3:36是不是有貓叫聲?然後看完以後也想來改一把AAP01了🤗
貓叫聲必備~ 這把改下去改不完~真的~
pls do more of this asmr upgrading vids
Sure thing!
How many joules ?
the mps output was 105mps and you can calculate the joules depending on the type of bbs you use :D
請問滅音器是哪支
Ace Tech 的 彩虹橋 (Bifroest)
AAP-01 is best thing
one of the best for sure
您好，想問一下hammer上面那塊滾輪有沒有彈簧的。
那塊滾輪是否能令hammer reset嗎？因為我的aap01單發模式hammer不能reset，為什麼呢？
那顆滾輪是主要的接觸面,但下壓程度不夠的話也會造成無法reset喔! 建議你可以拍個影片傳到粉專在幫你 看看 :D
那個不需要彈簧喔~
@@4UADSmartAirsoft 那是hammer spring 強度過硬造成嗎？
@@jimmykung8064 其實原廠的配置不應該會是個問題,而且擊錘簧過軟也會造成敲擊不完全的問題。 原廠用的廖很爛......打沒兩下司牙就變型了所以才會推整套的鋼製零件, 而且光換一個鋼擊錘也死很快~因為其他零件都還是鋅合金的.....
Asmr go brrrrr
Brrrrrrrrrrrrr