bro you just saved my build! I was trying to figure out why my knocker was light striking when I had my full auto disconnector in, and I had just taken out some of the washers in my hammer regulator. I had just about given up until now lol
I have always wanted to make a video like this but I figure it would be a few hours long explaining all the tolerance issues, tuning and such that are actually required to build a hicapa!
@@CZGamingTVfrom my educated guess, nearly 1k frame is about 250 on its own, slide is about 120. Depending on other major parts (including the base hicapa) it's gonna be about 1000 easily
Beautiful build! You forgot to put the other barrel stabiliser on the outer barrel, you put one in the barrel and one on on the other end and sits behind the threads i believe, Im planning on making a hi capa with the jungle cat slide and La capa barrel and you’ve just confirmed that 😂 I love how it all came together in the end. Keep it up 👍
I used to, but they never have anything in stock lol its kind of ridiculous. I've been on the notify me list for 6 different parts and haven't seen anything for about 7 months now lmao
@@pandaplayz2141 Same here, I can never find everything for one complete build unless I want it to look like a clown pew. Hopefully they start stocking up again.
Brilliant video man, I plan on building my own hi capa slowly over time as soon as I can, gonna start with the base TM and HPA it, then when i get the money gonna upgrade the internals then externals. Hoping to end up with a black and orange build haha. Vid has been a good help in helping me understand how the build process works!!
Bro. As a gunsmith and a guy who builds airsoft guns for fun. It is super bad to drop the hammer without the slide in. If you are gonna do that you should put your finger on the other side to keep it from bending the frame. Same goes for real steel 1911 and 2011s and many other pistols too
I heavily recomend lubing your outter barrel. Especially if it's been custom painted. Your paintjob will survive a bit longer and your slide will travel better
It wears because of the original Tokyo marui design that made its way into current parts. There are interlocking lugs on the outer barrel and on the inside of the slide that run during action. On the TM, it didn't matter because they were plastic. Lube will not save you from the wear.
“You dont need lube dripping Down your gun” thank you! Finally someone Else who agrees with me 😂 so Many guys on yt post build videos bathing the gun in lube
While I detest speedsoft builds, this was informative on troubleshooting my KA(TM Comp) 1911. I have used some gheto shims(screw with a few M3 washers on it) to give more tension to the Hammer spring. I also ordered some 130% Nozzle springs. it's not fully cycling and loading a new round. someone suggested its a power issue and someone else suggested stronger nozzle springs. I should get a little more power with the "shimmed" hammer spring and the nozzle shouldn't get stuck in the hop unit with the better spring.
Building is not my specialty, and I feel ignorant because I have no idea what anyone is talking about when it comes to parts. Thanks for making this vid, is helps.
I use a high grit buffing compound by 3M for lapping the slide to the frame. It can make the "scratches" look better? It is going to rub the anodizing away either way, nothing you can do about it really. I personally over lap my slides because I KG GunKote my pistols anyway. It leaves me with perfect tolerances and no bare metal after painting. Also, everything is a perfect match color wise after. KG is a self lubricating paint/coating. It is a better product vs CeraKote, IMO.
Once when I get money, I’m getting parts from armsaholic to make a custom marui John Wick Pit Vioer just how it looks in the movie. Thankfully I found this video to help me
I really would love to customize my Hi capa with a custom Slide. But the Problem is, theyre literally sold out everywhere. And the few i found are unable to ship to my country.
This is an awesome pistol! Question, if I were to buy a pre-built one will come with magazines or are they separate? If they are separate what magazine’s do you use?
I wanna build one but half the stuff you mentioned I have no idea what they are or how to determine which ones would be best for me, if I ever I meet you in person I’m about to pick your brain about it lol
@@ValiantAirsoft LoL. I just got into airsoft myself a few months back and I've already spent a few chunks myself. I like buying and working on the guns more than using them.
Have you tried using the purple loctite instead of the blue, much lower bond strength but probably still enough to hold the screws? I’m starting build and am hesitant to use the blue on the hopup chamber screws, and wanted to try the purple instead. It is loctite 222 instead of 243. Nice build btw.
could you elaborate in the Airsoft Masterpiece trigger bar? What advantages would I get from adjusting it? Is it much of a difference from the LA CAPA trigger bar?
I dont know for tm but kjw hammer is potmetal i broke mine and i dont play speed only casual airsoft. Tolérance issu was my biggest problem the hammer dont move freely and i dont want to modify à 80buck hammer to fit in a 100buck pistol Your build look so cool, but i dont think investing so much money is worth if the person dont play competition. But it's vers informative
great info especially on the detent thing, i hate that and have lost my spring now i cant move my safety nor remove it so annoying.... also why is the 4.3 frame longer then the 5.1, i have a 5.1 and its longer then the 4.3
If you're going from the ground up all in one shot it makes sense to buy everything separate, but 99% of people are better off buying a TM base and building off the grip/frame
Love the video. I have a question. I have the same slide you have here, but I have an airsoft masterpiece limcat advanced frame. I didn't have to fit the slide to the frame like you did in this video. It also has the tiniest bit of wobble. My question is: is that ok? Does it need to be super tight?
This is a really stupid question but I'm just starting getting into working on my own airsoft guns and modifying my hi capa. Will a simple precision screwdriver set do or are there certain uncommon sizes of bits you have to make sure you get?
![[Hi-Capa] Aluminum Outer-Barrel Fitment - improve accuracy and reduce wear](/img/n.gif)
You actually built your own Airsoft gun, THAT IS AMAZING!!!!
Are you knew to airsoft?
No, I've seen Airsoft. Also you'd misspelled "New".
@@matanuigaming2556 oh my bad on the spelling
It’s still a high capa base but not it’s own gun
@@matanuigaming2556 tap there name then you can @ them
bro you just saved my build! I was trying to figure out why my knocker was light striking when I had my full auto disconnector in, and I had just taken out some of the washers in my hammer regulator. I had just about given up until now lol
Yes!
Solid video bro!!!
Appreciate you
@@ValiantAirsoft just looked this up to see deemoe also dropped a comment 😂, good stuff man
Big fan bro 💯
Bro that Hi Capa is so snappy🤯
I have always wanted to make a video like this but I figure it would be a few hours long explaining all the tolerance issues, tuning and such that are actually required to build a hicapa!
Keep it as simple as you can
@@ValiantAirsoft hi i would probably build one too how much did this build cost???
everything included i mean :D
@@CZGamingTVfrom my educated guess, nearly 1k frame is about 250 on its own, slide is about 120. Depending on other major parts (including the base hicapa) it's gonna be about 1000 easily
Beautiful build! You forgot to put the other barrel stabiliser on the outer barrel, you put one in the barrel and one on on the other end and sits behind the threads i believe, Im planning on making a hi capa with the jungle cat slide and La capa barrel and you’ve just confirmed that 😂 I love how it all came together in the end. Keep it up 👍
I've been doing that for a long time I didn't know it was specifically for it at the time lol.
What timecode?
@@1dafullgaming688 31:30 I think
Beautiful build, love LA Capa Customs.
Glad you like them!
I used to, but they never have anything in stock lol its kind of ridiculous. I've been on the notify me list for 6 different parts and haven't seen anything for about 7 months now lmao
@@pandaplayz2141 Same here, I can never find everything for one complete build unless I want it to look like a clown pew. Hopefully they start stocking up again.
@@warwolveairsoft Yeah for sure, I've found some of the parts I needed on Evike so I've been trying to piece things together.
Hats come off dude thank you for your awesome content much appreciated 👏 and happy new years valiant Airsoft
How much was everything about
Brilliant video man, I plan on building my own hi capa slowly over time as soon as I can, gonna start with the base TM and HPA it, then when i get the money gonna upgrade the internals then externals. Hoping to end up with a black and orange build haha. Vid has been a good help in helping me understand how the build process works!!
Bro. As a gunsmith and a guy who builds airsoft guns for fun. It is super bad to drop the hammer without the slide in. If you are gonna do that you should put your finger on the other side to keep it from bending the frame. Same goes for real steel 1911 and 2011s and many other pistols too
I heavily recomend lubing your outter barrel. Especially if it's been custom painted.
Your paintjob will survive a bit longer and your slide will travel better
It wears because of the original Tokyo marui design that made its way into current parts. There are interlocking lugs on the outer barrel and on the inside of the slide that run during action. On the TM, it didn't matter because they were plastic. Lube will not save you from the wear.
“You dont need lube dripping Down your gun” thank you! Finally someone Else who agrees with me 😂 so Many guys on yt post build videos bathing the gun in lube
What means lube in german xD?
@@normanvanveenendaal647 Schmierung
While I detest speedsoft builds, this was informative on troubleshooting my KA(TM Comp) 1911. I have used some gheto shims(screw with a few M3 washers on it) to give more tension to the Hammer spring. I also ordered some 130% Nozzle springs. it's not fully cycling and loading a new round. someone suggested its a power issue and someone else suggested stronger nozzle springs. I should get a little more power with the "shimmed" hammer spring and the nozzle shouldn't get stuck in the hop unit with the better spring.
Perfect video for the airsoft community 👍🏻👍🏻👍🏻
What a beauty, loved this vid.
1st Shout out from PH 🇵🇭
Bro just built a whole high capa gun like it’s freaking Legos
LOL
No really you’re talented
Nice build ❤
Thank you
Building is not my specialty, and I feel ignorant because I have no idea what anyone is talking about when it comes to parts. Thanks for making this vid, is helps.
That’s a dope build. Personally, Im working on an Aap-01 build, and a 9mm Sbr by King arms build.
I know you didn’t ask, but I’m just excited about it
Cool, good lucki!
i still don't understand how hes building a gun. i tried and never accomplished I had to sell my parts, you did great.
lovd these thanks man
I use a high grit buffing compound by 3M for lapping the slide to the frame. It can make the "scratches" look better? It is going to rub the anodizing away either way, nothing you can do about it really. I personally over lap my slides because I KG GunKote my pistols anyway. It leaves me with perfect tolerances and no bare metal after painting. Also, everything is a perfect match color wise after. KG is a self lubricating paint/coating. It is a better product vs CeraKote, IMO.
Thanks for another video. Happy Thanksgiving!
looks badass. good job
have amazing day for you buddy God bless you
Love your content bro keep it up :)
Appreciate it!
Watching from taiwan...a filipino airsofter here.
dude loves the color blue
Sick build! 🔥
This is true art
i saw the thumbnail, and decided that after i watch this video, im making one of these beauties.
i just need a budget build.... which is a fantastic video idea!!
Gun grease or thicker oil helps hold springs and other micro parts from being lost and keeps it in place… sometimes 😂😂
I don’t even plays air soft and I’m gonna build one. Already ordered tm hi capa black. Probably gonna do same parts as you but purple.
There's definitely fun just in building them
God DAMN that is BEAUTIFUL
Great build
Nice buiild, after Christmas, time allowing, I will try a build,
Total costs ? Please😮
Dang how expensive are each of these parts you could buy like 5 fully built ones stock
Once when I get money, I’m getting parts from armsaholic to make a custom marui John Wick Pit Vioer just how it looks in the movie. Thankfully I found this video to help me
I really would love to customize my Hi capa with a custom Slide. But the Problem is, theyre literally sold out everywhere. And the few i found are unable to ship to my country.
Well done sir
Awsome brother
Viton orings/green orings might be better to use :).
You must try a willow bucking they are the best
Threadlock not Loctite... One of my pet peeves as an engineer.
Loctite is a brand and also make superglue, grease and other things
Min 32 that o ring is going to disturb you
Nope works great
The First gbb i want to buy is a TM hi capa 5.1 *-*
How much did it all cost?
me forgetting to turn down the volume after this video and getting my ear bombed
The 1911 is the ultimate template pistol
How much does this cost
If your trigger "wiggle" you can use super glue , paper from notebook and paper knife
This is an awesome pistol! Question, if I were to buy a pre-built one will come with magazines or are they separate? If they are separate what magazine’s do you use?
All pistols, stock or pre-built, come with one marui magazine. I also only recommend marui mags, the guarder mag kits or prowin mags.
@@ValiantAirsoft what about a WE extended mag?
Is there a way you can get the people at LA CAPA CUSTOMS to build it for you?
lacapacustoms.com/custom-builder/ref/valiant
I wanna build one but half the stuff you mentioned I have no idea what they are or how to determine which ones would be best for me, if I ever I meet you in person I’m about to pick your brain about it lol
ima totaly try this when i can aford it. rn can only aford springers or used guns
12:09 I can't imagine how much of a headache it would be if the grip safety wasn't working properly and the pin was already in
Nice!
Thought this build.might be a little over the top for my taste but it's actually sick. Good shit man! I bet that was a good chunk of change lol.
A few chunks
@@ValiantAirsoft LoL. I just got into airsoft myself a few months back and I've already spent a few chunks myself. I like buying and working on the guns more than using them.
Can I have that one for my birthday please I’ve been wanting this for my whole life
Lets hope i can get this new job so i can finally get a good airsoft gun
How much did the build cost? Amazing build by the way! 🔥🔥
A he'll of a lot im building one the frame slide and the grip is £600
as guy who owns real guns... kinda surprised how similar a lot of the parts to this are similar to a 2011. if you know you know, but i can respect it
Have you tried using the purple loctite instead of the blue, much lower bond strength but probably still enough to hold the screws? I’m starting build and am hesitant to use the blue on the hopup chamber screws, and wanted to try the purple instead. It is loctite 222 instead of 243. Nice build btw.
I have not, blue already comes off easy enough.
@@ValiantAirsoft ok thanks
How much did it all costs?
I want one like that once I get the money im sooo doing this
could you elaborate in the Airsoft Masterpiece trigger bar? What advantages would I get from adjusting it? Is it much of a difference from the LA CAPA trigger bar?
I dont know for tm but kjw hammer is potmetal i broke mine and i dont play speed only casual airsoft. Tolérance issu was my biggest problem the hammer dont move freely and i dont want to modify à 80buck hammer to fit in a 100buck pistol
Your build look so cool, but i dont think investing so much money is worth if the person dont play competition.
But it's vers informative
Awesome video and even better Hi-Capa!!! Is it possivel to use as a base the model Tokyo Marui Hi-capa 5.1 Government edition, to this kind of build??
What is the grand total price for all this
all from scratch it can cost from $ 400 to +$1.000 easily
Make a collection video
great info especially on the detent thing, i hate that and have lost my spring now i cant move my safety nor remove it so annoying.... also why is the 4.3 frame longer then the 5.1, i have a 5.1 and its longer then the 4.3
The competition frame is 3.9" length
Amazing build but I’m just wondering how much was the gun and all these parts could you let me know please👍
1500 it’s how much I spent on mines and I have less parts lol
Nice I started upgrading my hi capa and including the gun. I think I’m about 900 bucks right now.
How much did it cost?
@ValiantAirsoft how much would you say you spend on all those parts im curious cause i wanna build my own
Is it more expensive to buy a pre-built hi capa or get a base and upgrade it yourself with all the parts
How much did it cost in total?
Do these parts also work in gel soft guns
Whats thr difference between airsoft and speedsoft?
Speedsoft is a tournament style of airsoft
33:09 you said upgrading to a 150% for a stock slide will make it last longer, wouldn't that do the opposite by putting more stress on the slide?
Higher spring = less recoil = less impact at the end of travel = less wear imo
Can you also play it with an hpa adapter, i.e. HPA in general the way he built it?
yes, I just prefer gas mags
Can you do a glock 18c airsoft
What's that frame you got
I can't stand the Waldo nozzle spring.. I've chewed through so many it's unreal.
I ended up switching to the aip 140% and never chewed one up since
Hey Ik this is a bit off topic but what’s a good suppressor for a 1911 A1
does the hammer spring/back strap have already those little things in it and put the spring and the plunger in or ot
Can you send me the pistol the hi- Capa 4.3 because I don’t know which one to get
Is it better buying them individually vs buying a TM unit?
If you're going from the ground up all in one shot it makes sense to buy everything separate, but 99% of people are better off buying a TM base and building off the grip/frame
is it better and cheaper to build your own gun or is it better to buy an already built one?
If you don't know how to build, then prebuilt is the way to go until you are accustomed to the function
Love the video. I have a question. I have the same slide you have here, but I have an airsoft masterpiece limcat advanced frame. I didn't have to fit the slide to the frame like you did in this video. It also has the tiniest bit of wobble. My question is: is that ok? Does it need to be super tight?
no that's ok
This is a really stupid question but I'm just starting getting into working on my own airsoft guns and modifying my hi capa. Will a simple precision screwdriver set do or are there certain uncommon sizes of bits you have to make sure you get?
Standard metric hex sizes and phillips
What would be the best online sight to buy hi capa parts?
i wish i can get a hi capa or any airsoft but i got no money
Did you have to do any modifications to the frame ?
No mods just fitting to the slide as usual
@@ValiantAirsoft oh ok maybe it was just mine lol
how much did that all cost? to add all the aftermartket parts?
How much would something like this cost?
This would be $12-1400 depending what you did exactly.
@@ValiantAirsoft WTF
i lost my thumb safety spring so had to gget new one 😭😭
Does your thumb actually reach the thumb rest? Seems too far away.