It is short stoked using hadrons short stoke bouncer kit, I did still have to dremel out a small section for the charging handle, it’s only cause the charging handle sticks out quite a bit more then stock
Can you give link on this conversion kit? Also, do you need to put on the rail that lies on top of the charging handle? Would you be able to just not install that side?
@@MaCroCuRV the kit if sold in 2 different parts, if you search for action army aap01 hand guard and action army aap01 folding stock you will see them online, you don’t have to install that top section above the charging handle, the rif will still work fine but it may be a bit wobbly and not that solid as it’s only anchored by a small pin going through the grip 👍🏻
@@saturnsp3515 if you google 200mm action army app01 barrel it should come up, they don’t make any other sizes accept for the stock one and this one for the aap
Yes it does, I’ve done it :) They use an identical lower to the standard AAP01 and the rear of the upper receiver is also the same it’s only the front half and the internals that are a bit different
Thanks for the reply. I'm UK too. Have been set on this build for a while but was concerned going for a 200mm barrel would mean my psi would have to be too low for my aap to cycle! Payday tomo, so will order the handguard and barrel. I already have the stalker kraken tdc hop, a short stroke kit, tti trigger and the usual durability upgrades. Can't wait to get this build finished now!
@@DustyLungsairsoft thank you sooo much. You realy helped me bcs mom told me i get this kit for christmas and i dont knew how long barrel i can fit here. So thank you so much again.
@@ApexMixHD no worries bro, I don’t know the actual weight but it’s very light still, I would say about 2kg with the mag. The charging handle is a TTI AAP-01 Extended Charging Handle with Selector Switch
No you don’t need to instal a longer barrel, I just did because I had the space in the new hand guard and the longer the barrel the more air i save with each shot!
@user-ed6dz7dq3f if I had to guess, it'd be around 310fps. Around 1.1J (uk limits for non semi locked or manual action RIFs is like 1.14j (350fps with 0.2s)
Nice little build that is. ❤
Thanks!
@DustyLungsairsoft because of this I've got to do this build to mine haha 😄 😆
do you have to short stroke the bolt, in order to use the charging handle with the folding stock? or can you leave the spacer out?
It is short stoked using hadrons short stoke bouncer kit, I did still have to dremel out a small section for the charging handle, it’s only cause the charging handle sticks out quite a bit more then stock
would this work on a aap 01 cthulhu tandemcross?
Not 100% sure because the upper is slightly different - imo if you looking to do this sort of build start with a AAP
W chanel this will help me with my build !
Can you put the links in the description or comments for these parts
Following
@@BurningRubber97 action army handguard and folding stock
@@BurningRubber97 action army 200mm barrel
@@DustyLungsairsoft
Can you give link on this conversion kit? Also, do you need to put on the rail that lies on top of the charging handle? Would you be able to just not install that side?
@@MaCroCuRV the kit if sold in 2 different parts, if you search for action army aap01 hand guard and action army aap01 folding stock you will see them online, you don’t have to install that top section above the charging handle, the rif will still work fine but it may be a bit wobbly and not that solid as it’s only anchored by a small pin going through the grip 👍🏻
@@DustyLungsairsoft thanks for the info!
You can find all the parts you need on evike@@MaCroCuRV
What are the parts like the hand guard stock and stuff called?
@@monk6732 action army aap01 handguard and action army aap01 folding stock
brother why the bolt is so dry
Because I need to put some grease on it 😂
What length inner barrel was used? That looks ace!
@@MooseInThaHoose it’s a 200mm from action army, same as the original just longer
@@DustyLungsairsoft could I get a link for that?
@@saturnsp3515 if you google 200mm action army app01 barrel it should come up, they don’t make any other sizes accept for the stock one and this one for the aap
will the stock fit on aap01C?
@@sniper_4253 yes it should do, the rear part of the aap01c is the same as the aap01 so shouldn’t have any issues
@@DustyLungsairsoft thanks 👍
Yes it does, I’ve done it :)
They use an identical lower to the standard AAP01 and the rear of the upper receiver is also the same it’s only the front half and the internals that are a bit different
Which suppresor do you use the name and brand
Hexx supressor by sniper mechanics
bro said it in the video
Nice build! What PSI are you running at pls?
At my field the limit is 350fps on a .2, when running it hpa I tend to use .32 at around 60psi and come in just under the limit!
Thanks for the reply. I'm UK too. Have been set on this build for a while but was concerned going for a 200mm barrel would mean my psi would have to be too low for my aap to cycle!
Payday tomo, so will order the handguard and barrel.
I already have the stalker kraken tdc hop, a short stroke kit, tti trigger and the usual durability upgrades.
Can't wait to get this build finished now!
@@Oak_So_Pretty I’ve never had an issue personally, I only adjusted from about 70psi to 60psi when I put in the new barrel
@@DustyLungsairsoft Glad to hear it, thank you.
Bring on the brrrrrrttttt
how long is the barrel you bought and what brand? Thanks :)
@@just3d444 200mm action army
Would all of these parts work with the aap01c?
Yes they should all be compatible
@@DustyLungsairsoftAlr thanks man
@@DustyLungsairsoft Also another question, do I need the 200mm inner barrel to install the handguard?
@@CatKingSolannope can be used with any length inner barrel
@@DustyLungsairsoft Alright thanks
WHAT IS LONGEST LENGHT of inner barrel I CAN PUT INTO this carabine kit
The one I installed was 200mm and come up to the end of the outer barrel, you could go longer but would need a supressor to cover the inner barrel
@@DustyLungsairsoft thank you sooo much. You realy helped me bcs mom told me i get this kit for christmas and i dont knew how long barrel i can fit here. So thank you so much again.
Quick question man! how much does this thing weigh and could you give me those links for the charging handle and fire select? I appreciate it!
@@ApexMixHD no worries bro, I don’t know the actual weight but it’s very light still, I would say about 2kg with the mag. The charging handle is a TTI AAP-01 Extended Charging Handle with Selector Switch
@@DustyLungsairsoft Thanks!
1.2 - 1.4KG
@ thanks! I actually got a couple parts for my Aap01 this Christmas! It’s great!
Hi capa series will be good
Still waiting for the parts but won’t be long! Got plenty of stuff to come on this carbine as well! Thanks for watching ✌🏼
Do I need a bigger inner barrel is installing a suppressor?
I hope not
@DustyLungs Airsoft
No you don’t need to instal a longer barrel, I just did because I had the space in the new hand guard and the longer the barrel the more air i save with each shot!
@@DustyLungsairsoft thanks!
nicee
Thanks
What fps is it firing at
270fps with .32s
@@DustyLungsairsoft what do you think it would be with .25
@user-ed6dz7dq3f if I had to guess, it'd be around 310fps. Around 1.1J (uk limits for non semi locked or manual action RIFs is like 1.14j (350fps with 0.2s)
@@DjentyDjamie spot on 👌🏻
Nice, whats maximum range with this barrel?
Accurate to 60m maybe 70m
@@DustyLungsairsoftwhat fps please??
@@patrickwelch365it'll be sub 1.14J (350fps with 0.2s) from another comment reply it was around 270fps with 0.32s
Just use your upper as a hammer
Whar caliber is it 9mm ow 45
6mm plastic