Things you might need: Entire LT & RT Button: amzn.to/3T8ZUql Top of LT & RT: amzn.to/3T2USvq Springs: amzn.to/4a7Zk2W Screws: amzn.to/3Ttv2Cf Repair Kit: amzn.to/3TtYrur All Amazon links above are affiliate links. I get a small amount of money if you end up using them to make purchase (it does not have to be for the item I link to, as long as you click my link then move to another item, it works)
Unbelievable. 2 yrs, for 2 yrs I've had this thing sitting around because the trigger was stuck and the first method fixed it. Thanks, here I was debating tossing it until I found this video.
I would recommend anyone to not get the controller. It’s great but there are so many issues. I wanted to just map on of the paddles to screenshot and then hold for recording a clip. Can’t do it. Also can’t dim the light to turn off. And also I’ve had sticky triggers twice. They need to make a series 3 and make it not have this many issues.
i havent had mine for long, and i never want to get one ever again, the left bumper straight up doesnt work, and the right trigger sound like a bumper when i press it, i would rather have a regular controller anyway since the patterned, rubbery grips make sweat stick to it
Confirmed still all good info and fixed mine on 12.21.2024 - No complications. - My fix was a bit different. But, the video helped me get to whatever it was. I reached the point to where the bar was about to need taken out before mine magically started working again. It was the top right trigger. Nothing looked broken and nothing needed cleaned. I assume I had pressed too hard at some point and the trigger just became unresponsive and something jarred out of place. Disassembly and reassembly likely put whatever was out of place, back into place, thankfully.
Good video was able to fix my stuck trigger, I have no prior experience to taking apart electronics but was able to follow your guide and fix it within 1 hr
Thanks a lot man, I couldn’t figure out how to get that rod out without damaging the plastic and when looked online I couldn’t find any “how to” or “guides” how to get it out, not even on IFixIt, then I found your video and with your help I managed to get the rod out and replaced my broken trigger with a new one, my controller is now working! Great video, very informative. Thanks again!
Thank you very much! The mechanics totally stopped proper working but opening the controller let fall out all the plastic parts that were broken. Now everything works fine. Thank you for your guide. :)
Thanks so much for this, seems there was some bit of dust or grit behind my left trigger that was forcing it to be stuck on. A bit of cardboard did the trick. I didn't even need to buy tools to open it up!
I clean mine very well is a new controller i just open to see if something bad , but , the problem is only in the 3 short mode , is not reading properly only when i bend a little bit the LT , but if press normal without bend , is not reading , in the other modes read perfectly
5 หลายเดือนก่อน
Any possibility to fix mechanical deadzone? I'm having a hard time setting it up to work on lowest sensitivity, the pad doesn't register clicks consistently and I don't really want to delve into software adjustments, as it''s only a workaround.
Thanks for the video. My LT button registered 1.0 on the first two levels of the hair-trigger lock but 0 = no response for the last one. Is there any way to fix it?
Thank you for a VERY good video. I have gone through all the steps twice but i still have problems. It seems as my left trigger is scraping a bit on the left side. Also the left trigger is seems like it is always pressed down. (this is my main problem.) Did you say where the actual sensor/switch is located? I am trying to see if ther is any dirt/grit on it that makes it register constantly. Maybe they are just broken? Happy to hear your thoughts.
I haven't done that before, but I suggest you clean the areas when the paddles connect to the controller. Go inside if needed and clean them from the inside.
Hello everyone, please tell me if anyone knows, maybe I missed this in the video. If the controller is not turned on for a long time, then everything is ok for the first couple of hours, and then the mouth and mouth just clamp down. I took it apart and looked at the magnets - everything is ok. Perhaps someone knows what's wrong or is there an instruction on how to fix it? Have a nice day everyone and thank you for your attention.
My wife hit my controller with a bat or something, noticed my right trigger was sticking and the left thumbstick was in 2 pieces. You should see what she did to the rest of my pc.
Things you might need:
Entire LT & RT Button: amzn.to/3T8ZUql
Top of LT & RT: amzn.to/3T2USvq
Springs: amzn.to/4a7Zk2W
Screws: amzn.to/3Ttv2Cf
Repair Kit: amzn.to/3TtYrur
All Amazon links above are affiliate links. I get a small amount of money if you end up using them to make purchase (it does not have to be for the item I link to, as long as you click my link then move to another item, it works)
Unbelievable. 2 yrs, for 2 yrs I've had this thing sitting around because the trigger was stuck and the first method fixed it. Thanks, here I was debating tossing it until I found this video.
its ridiculous that such an expensive controller has so many problems
I would recommend anyone to not get the controller. It’s great but there are so many issues. I wanted to just map on of the paddles to screenshot and then hold for recording a clip. Can’t do it.
Also can’t dim the light to turn off.
And also I’ve had sticky triggers twice.
They need to make a series 3 and make it not have this many issues.
Mine dosent have any problem, I just dropped mine and the joy stuck won’t push down, just a simple fix.
Mines been sat and I’ve only just thought about looking. It genuinely f me off
i havent had mine for long, and i never want to get one ever again, the left bumper straight up doesnt work, and the right trigger sound like a bumper when i press it, i would rather have a regular controller anyway since the patterned, rubbery grips make sweat stick to it
Confirmed still all good info and fixed mine on 12.21.2024
- No complications.
- My fix was a bit different. But, the video helped me get to whatever it was. I reached the point to where the bar was about to need taken out before mine magically started working again. It was the top right trigger. Nothing looked broken and nothing needed cleaned. I assume I had pressed too hard at some point and the trigger just became unresponsive and something jarred out of place. Disassembly and reassembly likely put whatever was out of place, back into place, thankfully.
Good video was able to fix my stuck trigger, I have no prior experience to taking apart electronics but was able to follow your guide and fix it within 1 hr
Thanks a lot man, I couldn’t figure out how to get that rod out without damaging the plastic and when looked online I couldn’t find any “how to” or “guides” how to get it out, not even on IFixIt, then I found your video and with your help I managed to get the rod out and replaced my broken trigger with a new one, my controller is now working!
Great video, very informative. Thanks again!
Thank you very much! The mechanics totally stopped proper working but opening the controller let fall out all the plastic parts that were broken. Now everything works fine. Thank you for your guide. :)
Thanks so much for this, seems there was some bit of dust or grit behind my left trigger that was forcing it to be stuck on. A bit of cardboard did the trick. I didn't even need to buy tools to open it up!
The first method worked now I just gotta get what ever is in my controller out
There's also a switch on the back that makes the button stuck, check if it was inadvertently pressed
I was preparing to go buy another one since i dont have a stupid security screw. Thank you for saving me a considerable amount of money.
I was just about to buy a new controller found this video and it's completely fixed my LT
What was wrong with your LT? mine is makign a clicky noise whenever i press it down
Mine presses by it self sometimes my rt @rugbylover5784
Good video but what’s with the huge jump between 11:46 and 11:50 my controller didn’t come all the way apart just with taking that top piece off?
What if the gear attached to the trigger is probably literally chipping apart and getting stuck back in itself causing it to lock up?
This was super helpful! I just used paper towel and the vacuum situation. Worked like a charm. Thanks!
Absolute lifesaver fixed my stuck trigger and it works like a charm again 🎉
I clean mine very well is a new controller i just open to see if something bad , but , the problem is only in the 3 short mode , is not reading properly only when i bend a little bit the LT , but if press normal without bend , is not reading , in the other modes read perfectly
Any possibility to fix mechanical deadzone? I'm having a hard time setting it up to work on lowest sensitivity, the pad doesn't register clicks consistently and I don't really want to delve into software adjustments, as it''s only a workaround.
Just got a new controller and my lt button unresponsive along with my other 2 elite controllers all of a sudden
I realized why my button felt like it was jammed. There are two button locks at the back of the controller one of em was down the other was up
solved the issue for Logitech f310 in 1 minute with your help.
Thanks for the video. My LT button registered 1.0 on the first two levels of the hair-trigger lock but 0 = no response for the last one. Is there any way to fix it?
Bro i had the same problem but I fixed by changing the deadzone ( 25 - 100) i hope you can fix it too
Same problem with my RT last point doesn't work
@@MrAwManI'll try that method
Thank you for a VERY good video. I have gone through all the steps twice but i still have problems. It seems as my left trigger is scraping a bit on the left side. Also the left trigger is seems like it is always pressed down. (this is my main problem.) Did you say where the actual sensor/switch is located? I am trying to see if ther is any dirt/grit on it that makes it register constantly. Maybe they are just broken? Happy to hear your thoughts.
I just got this controller brand new I can’t believe I’m watching this
Bro question can you show ways to fix unresponsive paddles on this controller pls?
I haven't done that before, but I suggest you clean the areas when the paddles connect to the controller. Go inside if needed and clean them from the inside.
Bro I fixed it by putting a piece of paper on the button outside in the back and now I can feel the click
I had to take the time to comment and say that blowing in my left trigger fixed my problem 😂😂 thank you very much
Yo thanks man, I tapped the side of the controller and it fixed quick! Much appreciated!
Hello everyone, please tell me if anyone knows, maybe I missed this in the video. If the controller is not turned on for a long time, then everything is ok for the first couple of hours, and then the mouth and mouth just clamp down. I took it apart and looked at the magnets - everything is ok. Perhaps someone knows what's wrong or is there an instruction on how to fix it? Have a nice day everyone and thank you for your attention.
Great video I didn’t have any pliers so I used some old crappy tweezers and it did the job came it really quick just need to buy a spring for it now
Thank you! This helped so much!
My wife hit my controller with a bat or something, noticed my right trigger was sticking and the left thumbstick was in 2 pieces. You should see what she did to the rest of my pc.
Idk why my wired xbox one is a lot tougher than my wireless series s controller 😂
Facts
Thank you!
You absolute legend you! 😍🔥
I’ve done it first attempt, i m so good, i can coach you if you want .
Thank you :D
bon tuto, merci
thank you
Thank u so much
Thanks
It’s my battery
My positive power connector I had to put like a piece of paper behind it
Alphas legends
i love you
Sorry, a fingernail?
Im the first mf PINNED ME SO PPL CAN KNOW LMFAO