Thanks to HelloFresh for sponsoring today's video. Go to strms.net/hellofresh_trovarion, use my code TROVMINIFREE, and receive one free breakfast item per box while subscription is active.
I have tried Hello Fresh on 2 occasions. They started out fine but after a couple of weeks, some ingredients were missing from each box. When I contacted them, they apologised and refunded some money. However, this meant that I was unable to make some of the dishes I ordered without having to go to the shop to buy what was missing (one of the reasons I chose Hello Fresh). Last year (after a gap of a couple of years) I tried again, thinking that things had improved. They hadn't. The same thing started to happen again. I will not be trying for a third time.
My friend, Tamiya has a masking tape for curves that works like magic. I save my standard paper tape for flat surfaces now. The 2mm should be a goodnsize for stripes like that in future
I was coming here in the comments, from the automotive world, to say that. Saw this comment. Pinstriping masking tape, comes thin (even 1mm). And if you buy the right kind, it's even highly flexible for TIGHT curves. Yes, Tamiya is a brand that makes those tapes, as the above comments wrote. 87206 🤷♂ IDK, you can ignore my 2 cents since I've never painted a mini, and only watched 3 (at most) videos about it.
I sub to hundreds of painting channels but I have to say, your skill and the modesty you show when you make mistakes to help others learn is why I never miss a video
really like the solution of just saying F it and not putting the hazards all the way around the leg and shoulder, it looks really good. The pauldron especially because it reads to me like the back half has been burned away from the jump pack creating a little story telling in the paint job, love that.
A video with a problem, despair, perseverance in front of adversity, and finally victory - this actually made it for a more entertaining video and a bigger learning experience than if everything had gone as planned. Even someone as experienced and talented as Trovarion can experience struggles and then persevere, that is an inspiration for us mere mortal pigment pushers.
It really helps to see pros like you hit surprise snags or to even have an area that is "out of your comfort zone" - i sill dont exactly make accidental masterpieces like this, but i certainly take comfort knowing I'm not entirely alone.
@@trovarion I’m an absolute novice at miniature painting. But maybe the technique used on the iron warrior to paint the more mechanical parts of a necron, with the carapace and weapon of the necron being painted in the style you used for the Necron Destroyer. Give some differentiation between the hardened armour and weapon, and the more intricate mechanical parts like joints and the spine.
Hello sir! I am new to figure painting and warhammer (I actually painted a few figures two years ago and gave up but now I'm back to it hopefully will build an army and play some games) I'm finding your videos very interesting and helpful, I am usually quiet in the comments section. But because I am a scale modeller (also running a youtube channel) with some experience with various paints and techniques I think I could share some advice. Next time when masking stripes try to use a very thin tamiya masking tape, it's easier to keep curves. Tamiya also has a white masking tape for curves, you can test that one but it doesn't have a strong grip on the model. As for chipping, am not a fan of chipping the vinyl acrylic paints like vallejo as it chips with quite large and out of scale flakes, and it's hard to control. The better way to do this is to spray lacquer based paint like SMS, MRP, Hataka (orange series) or Mr.hobby C series for example. The chipping will take more time as they don't come off as easy as acrylics but you have way more control and can do really tiny chips. You can make this process a bit quicker by sanding the spots first with some high grit tamiya sanding sponges first. You can also try to do chipping with some tamiya or mr hobby H series acrylic paints. They are different from vinyl acrylics and chip differently too. so this is a little bit from me. Love your videos, and thanks for all the help I got from them!
Quick tip: Try using Tamiya xf-paints for chipping. They chip much better and finer than acrylics like vallejo, gw etc. Vinyl paints dont chip very precise, they come off like big chunky bits which is frustrating.
Fantastic video! Getting hazard stripes looking right on curved surfaces is the never-ending struggle of the Iron Warriors fan! Iron Warriors are a fun army to paint, they are one of my favourites to work on. They have a low skill floor, but a high ceiling - you can really push it with weathering and of course the dreaded stripes! I tried mixing up some of my units with a quartered black and metal scheme, so there's lots you can do with them.
Thanks for the video! I was interested in the metallic approach to your grimdark style and this video did not disappoint. I hadn't considered the contrast of dull to shiny and I must say, WOW. I really like the result. Thank you for your talent.
Thanks alot for your videos, I find them very motivating to get myself up and paint. I apreciate that you also share your negative thoughts and outcomes about a project, that motivates and also inspires me even more to try out some ideas and pushing away my negativity before i have even started ❤. Grey Knights would be cool to see from you ! Looking forward to your next video. All the best!
I've never seen a "chipping fluid" kind of method that was worth the effort. Yes, it might look a tad more realistic than simply using the sponge method, but at the cost of way more effort, layers, additional supplies (fluid or hairspray or whatnot) and also disaster is always looming. For models as tiny as 28/32mm, I don't think it's worth the effort. The sponge method and occasional retouching with a brush is more than enough.
Flexible masking tape would likely help a lot here. Got mine from an RC car shop as it is intended to mask curved lines for racing stripes but it works just as well on minis.
Love the way this turned out! I'm a noob to mini painting, so I enjoyed the perspective. Also, I had to mention that I can't not think of Baron Werner Ünderbheit when I saw what you did to the face shield.
holy hell thats awesome, and well done for coming back with solutions to the problems. The contrast wash combined with ink after at the start really sets the tone, and im looking forward to trying it with different variations. As always, thanks for another top quality video :)
I use removable sign making vinyl for masking objects. I paint the too be painted sections with watered down acrylic medium. It seals up the edges. After you paint the sections remove the vinyl and you have perfect lines. Like others said pen striping tape is great. As an artist I was really surprised all the cool useful products a sign making catalog contains.
Scale model builder here. What you want to do is a) get flexible masking tape and b) put stripes next to each other to ensure you always have the same distance between stripes. Then you just remove the "in between" stripes that will then reveal the area, that will be spray painted. If you are stingy with tape, you can always just put down a strip, put the "place holder" strip down, put down the next strip, peel of the place holder and put it next to the new tape...rinse repeat.
You have an older Custodes video. Would you ever revisit them with your current grim dark paint style? Would love to see what you’d come up with there! Cheers!
A perfectly timed video! It's only been in the last few days that I've started thinking about painting my Ork army in an Iron Waaaghiors scheme. I had thought I would have to fake the Trovarion Technique using the brown paints (as he started the video talking about) but this dull/shiny contrast is much better. Thank you!
Tamiya and Vallejo both make masking tape for curves. They are white tape that bend with minimal deformation to be able to mask off nonplaner surfaces.
you've done well here! hazard stripes are a pain in the back to do no matter the scale. I had trouble doing them at cosplay scale and at cosplay scale. even with painters masking tape the striping still was a pain with the paint finding gaps in the paint
Thanks for sharing your experience! I often use several layers with exactly that kind of medium you used. The video did not specify how much water you did use for the chipping. From my experience it helps a lot to apply a lot of water and let it soak for some time if you want to deal with thicker layers - then even several stacked (thin) layers can be stripped quite well. If you apply a coat of clear varnish before the hipping medium it chips even easier.
Inspired by the crazy advice that adding a tiny bit of black helps white to cover better (technically it's now grey, but very very pale) I tried adding a tiny bit of red to my yellow and I'm sure that helped too. And I preferred the colour, it was warmer and deeper. I have no airbrush, so even easy coverage with a brush matters. (This dude looks awesome BTW!)
painting over hues or shades massively increases coverage. you can get very good coverage in yellow if you paint it over a yellow/white mix or in red if you paint it on top of a red/white mix etc.
I just got done using chipping medium and it was a learning curve for me. I had to use metal tools then go back and repair where the tools went too deep.
I really like the grim dark metallic armor! I was probably one of the ones harassing you for something like this because I am interested in applying it to an army of grey knights. Thanks for suffering for our entertainment and education. I know the youtube game has been frustrating for you but I always love seeing new content from you pop up in my feed.
I felt a relief when get to the part with a yellow paint. I'm painting a squad of Blood claws and I need to paint 30 yellow shoulder pads. It's a pain, since when I try to use opaque layer, I receive visible brush strokes. So instead I'm using diluted paint. And I need to make a layer, after layer and layer... Now I know that I'm not alone....Thank you!
Overall, this is very nice work, and you're certainly better with an airbrush than I ever will be! A couple of notes of minor critique: white, then yellow is the standard approach, if laying yellow on anything darker than light gray; one idea you might have considered was using a slightly-gray white under the yellow and then when peeled back, it would suggest primer paint (think of the shade used in automobile work). Subtle browns before the orange on the yellow would've built up tonal variety and felt more weathered. I really like using Windsor and Newton inks for that. You could've also used some brass / copper to break out some of the detail areas on the metallic parts (for example, the knuckles on the hand) with little touches here and there before the wash steps. The blue / brown is an interesting approach; I usually do diluted black, then browns, then orange, then back again w/ blacks where additional fluid leakage / smoke / etc. would be seen. Copper gets a whitish green, rapidly rubbed back, to suggest copper oxides. The jetpack could've used some blue / purple to suggest metals that have been heated.
Here is a small tip for you.... When painting straight lines over a curved surface you need to use thin strips of 1mm Tamiya masking tape this allows you to manipulate the line around the curved surface
The solution to curved masking is "Flexible Masking Tape". It's blue. It's the same kind of tape as the plastic electrical phase tape, but it comes in millimetre widths. 2mm works well. It conforms to curves and spheres really well.
I painted scaly armor on my Alpha Legion army, so I know your pain. Doesn't help that my first Rewards of Treachery Unit were Night Lords Night Raptors.... that got damned lightning took me forever.
I’ve found that the key to masking curved surfaces is to use 1-2mm wide masking tape. It can bend nice and uniformly and then you can fill in the area with thicker strips of tape.
I just learned last week that Tamiya has white flexible masking tape. Maybe that would cover a curve just a little better than the more rigid paper masking tape? Just a thought.
Holy hell, that end result is absolutely gorgeous. Everything tied together like crazy, and the base and pigment powder just capped it all off. 🤌🏼🤌🏼🤌🏼🤌🏼🤌🏼
Great video! Been thinking of getting some grey knights but the thought of fully TMM shinyness (or worse NMM level of labour) has kept me from it. Might have a go with this approach instead!
People like to feel that they are actually doing some level of cooking! This is why cake mixes make you add the egg... they don't have to, they could add it in dry, but you adding the eggs yourself gives you that sense of "I made these cakes!"
with the black stripes, you actually wanna free hand it, i use a pencil to line it where they need to be first and then just go back and forth with yellow and black till it looks good, that's how you get it all the across the cylinder, the tape is just a tool for straight surfaces. and seeing they are in a sense chaos marines, it never has to be too perfect of a line, so free handing it isn't that much of a problem as long as it looks straight.
Great looking metal, and you really should've gone for the masking goo or whatever other alternative instead of suffering through that headache. Flat stripes being completely fucked when applied to a curved surface is to be expected and would have me reconsidering my approach really fast.
I always freehand my hazard stripes. Messing around with masking tape looks like a nightmare. Mind you I thing using an airbrush is too much hassle as well.
I like using masking fluid when doing the hazards strips. Functions like masking tape to cover surfaces but is painted on. Foind it working so well when painting blades on ork boys and on a n Ambot for Necromunda.
That's something I never understood about all the different yellow paints I've used. They all have bad coverage, don't flow well no matter what you do with them, and require multiple layers to get a solid color. Why is that? What is it about yellow that makes it such a nightmare to paint with?
I really enjoy this channel, most other painting youtubers paint so differently than your average wargamer i dont even feel like its the same hobby haha Pro tip btw from someone who's done hazards for years, just eye ball it. Seriously, its much easier than it looks and its worth it for all the time and effort you'll waste faffing with tape, even on a flat surface.
Trovarian, you know what you do if you’re having trouble with a technique on a mini (ahem, hazard stripes)? TH-cam it, duh😂 that’s how I found YOUR channel. I would’ve thought that would have been a TH-camr’s first instinct to do lol anyway pretty cool paint job and I love your grim dark series. They are masterpieces🤌🏽
yep, that curverd lines are a bit problematic to mask, there as some elastic mask tape that works really good, (blue or white tape color, dont rememeber)
I use chipping effects quite a bit with 1/35th scale military models, although I at times still use, Ive tried all the commercially available AK-MIG-AMMO types & found using a FINE-mist aerosol hair spray is MUCH more cost effective, as chipping medium is pretty much the same stuff w/o fragrance additives (Treseme FINE/Ultra Fine, no fragrance med/high hold, fine/black aerosol cans, work best for me after trying MANY different brands of hair-spray products. 2-3 light coats & youre all good for later effects IF top-coated with an air-brush) 'AK Worn Effects' & similar products are akin to re-bottling exact same hair-spray products with some formula tweaks in much smaller quantities & charging thrice as more for the product!?... (Like re-bottling $12.00 per QUART Minwax oil-base wood stains for 'Streaking Grime/Rust' products & $elling ONE fluid OUNCE bottle for $8.00!?;) -Alot like home-commercial decorative/faux paint glazing products, charging uber-high $$$ per gallon, when one can simply use 'Flood' brand 'FLOETROL' paint conditioner/additive as a glazing substitute for MUCH le$$ money spent per gallon. (Floetrol IS a glazing compound, pretty much just a 'paint' carrier fluid w/o additional pigments & binding products;)... -As I have too, you'd found the chief issue with hand-brushing over ANY chipping effects products or hair-spray. Airbrushing top-coat over the chipping medium is MUCH more effective. Even if the pre-top/finish coat chipping medium is sprayed on n' fully dry/cured, upon re-wetting it with a brushed on top coat, the chipping medium then reconstitutes & then COMBINES with the brushed paint, thereby deleting, diminishing & diluting the chipping medium & its hoped for later chipping effect. Even moreso when high total thickness/MM paint built-up begins with multiple light/neutral base coats being brush applied to achieve a more opaque color profile (Yellows/reds/purples/etc)...YES, its aggravating!...Ha! -What your showing here HELPS so MANY miniature painters to avoid frustration, or ruining projects/products. GREAT work my man, keep it ^UP!...;)
Tamiya makes a flexible tape for RC car painting. I think it’s white. I have some in the garage I’ve used for lexan bodies then I use blue painters tape to mask off the large areas. Might work for stripes. I think the tape comes in a bunch of different widths.
Thanks to HelloFresh for sponsoring today's video. Go to strms.net/hellofresh_trovarion, use my code TROVMINIFREE, and receive one free breakfast item per box while subscription is active.
I have tried Hello Fresh on 2 occasions.
They started out fine but after a couple of weeks, some ingredients were missing from each box. When I contacted them, they apologised and refunded some money. However, this meant that I was unable to make some of the dishes I ordered without having to go to the shop to buy what was missing (one of the reasons I chose Hello Fresh).
Last year (after a gap of a couple of years) I tried again, thinking that things had improved. They hadn't. The same thing started to happen again.
I will not be trying for a third time.
It's a comfort to know that hazard stripes can be frustrating for even pro-painters.
I see so many people not even bother with the stripes and just paint their Iron Warriors all yellow
@@v02max75 that's some Rogal Dorn trickery
I find them harder on larger models, but when doing very small ones on battletech models, it's very easy. smaller scale is also much more forgiving.
Coming from gunpla, I always just use masking for stripes. Always. Man was never meant to paint straight lines and perfect circles
They should sell shoulder pads with raised stripes parts...
My friend, Tamiya has a masking tape for curves that works like magic. I save my standard paper tape for flat surfaces now. The 2mm should be a goodnsize for stripes like that in future
Tamiya worked for me as well, I added strips as spacers like you did and it was easy
I was coming here in the comments, from the automotive world, to say that. Saw this comment.
Pinstriping masking tape, comes thin (even 1mm). And if you buy the right kind, it's even highly flexible for TIGHT curves. Yes, Tamiya is a brand that makes those tapes, as the above comments wrote. 87206
🤷♂ IDK, you can ignore my 2 cents since I've never painted a mini, and only watched 3 (at most) videos about it.
I have the tamiya stuff, its frankly still a nightmare :(
I sub to hundreds of painting channels but I have to say, your skill and the modesty you show when you make mistakes to help others learn is why I never miss a video
really like the solution of just saying F it and not putting the hazards all the way around the leg and shoulder, it looks really good. The pauldron especially because it reads to me like the back half has been burned away from the jump pack creating a little story telling in the paint job, love that.
So good you painted it twice
And renamed the video 3 times.
A video with a problem, despair, perseverance in front of adversity, and finally victory - this actually made it for a more entertaining video and a bigger learning experience than if everything had gone as planned.
Even someone as experienced and talented as Trovarion can experience struggles and then persevere, that is an inspiration for us mere mortal pigment pushers.
Adding the blue contrast to the silver metal is such a genius idea! I've never seen anyone shade silver like that before.
Really? I thought it was common
Pretty simple color solution
It really helps to see pros like you hit surprise snags or to even have an area that is "out of your comfort zone" - i sill dont exactly make accidental masterpieces like this, but i certainly take comfort knowing I'm not entirely alone.
Looks to me like that mini set out to teach you the true meaning of "Iron Within, Iron Without." 🤣
Best ad read with supporting footage I've seen. The sandwich assembly was stellar!
Also, absolutely love Iron Warriors. This turned out fantastic.
definitely like this type of videos where you show EVERY process even the one that doesnt work. its an extra lesson for you and us
The metallics looked fantastic
I’d love necrons painted like that
But having said that, your necron video is probably my favourite necron paint job
it would actually be cool to combine the techniques somehow!
@@trovarion I’m an absolute novice at miniature painting. But maybe the technique used on the iron warrior to paint the more mechanical parts of a necron, with the carapace and weapon of the necron being painted in the style you used for the Necron Destroyer. Give some differentiation between the hardened armour and weapon, and the more intricate mechanical parts like joints and the spine.
To this day, I still thinking about the gem effects on that one Destroyer. Just mind-boggling to me. 😮
Hello sir! I am new to figure painting and warhammer (I actually painted a few figures two years ago and gave up but now I'm back to it hopefully will build an army and play some games) I'm finding your videos very interesting and helpful, I am usually quiet in the comments section. But because I am a scale modeller (also running a youtube channel) with some experience with various paints and techniques I think I could share some advice. Next time when masking stripes try to use a very thin tamiya masking tape, it's easier to keep curves. Tamiya also has a white masking tape for curves, you can test that one but it doesn't have a strong grip on the model. As for chipping, am not a fan of chipping the vinyl acrylic paints like vallejo as it chips with quite large and out of scale flakes, and it's hard to control. The better way to do this is to spray lacquer based paint like SMS, MRP, Hataka (orange series) or Mr.hobby C series for example. The chipping will take more time as they don't come off as easy as acrylics but you have way more control and can do really tiny chips. You can make this process a bit quicker by sanding the spots first with some high grit tamiya sanding sponges first. You can also try to do chipping with some tamiya or mr hobby H series acrylic paints. They are different from vinyl acrylics and chip differently too. so this is a little bit from me. Love your videos, and thanks for all the help I got from them!
Quick tip: Try using Tamiya xf-paints for chipping. They chip much better and finer than acrylics like vallejo, gw etc. Vinyl paints dont chip very precise, they come off like big chunky bits which is frustrating.
great tip, also for airbrushing that silver, iron color, the Tamiya LP paints are great, if smelly
I am stealing your method for coloring the metals like you did. Great idea.
Go for it!
7:09 I still have PTSD from trying to paint Bad Moon Yellow in the late 90's. The Horror! The Horror!
Fantastic video! Getting hazard stripes looking right on curved surfaces is the never-ending struggle of the Iron Warriors fan!
Iron Warriors are a fun army to paint, they are one of my favourites to work on. They have a low skill floor, but a high ceiling - you can really push it with weathering and of course the dreaded stripes! I tried mixing up some of my units with a quartered black and metal scheme, so there's lots you can do with them.
Thanks for the video! I was interested in the metallic approach to your grimdark style and this video did not disappoint. I hadn't considered the contrast of dull to shiny and I must say, WOW. I really like the result. Thank you for your talent.
Fantastic result - I think this is my favourite in this series
Thanks alot for your videos, I find them very motivating to get myself up and paint. I apreciate that you also share your negative thoughts and outcomes about a project, that motivates and also inspires me even more to try out some ideas and pushing away my negativity before i have even started ❤. Grey Knights would be cool to see from you ! Looking forward to your next video. All the best!
Thanks for walking us through the experience 🙏
I've never seen a "chipping fluid" kind of method that was worth the effort. Yes, it might look a tad more realistic than simply using the sponge method, but at the cost of way more effort, layers, additional supplies (fluid or hairspray or whatnot) and also disaster is always looming. For models as tiny as 28/32mm, I don't think it's worth the effort. The sponge method and occasional retouching with a brush is more than enough.
Flexible masking tape would likely help a lot here. Got mine from an RC car shop as it is intended to mask curved lines for racing stripes but it works just as well on minis.
or etching tape
Definitely going to be looking into adding color depth to my metallics now. Thank you. Great vid as always
This video was really fun to watch. Thanks for the suggestion. I'm going to try this on my Grey Knights
Love the way this turned out! I'm a noob to mini painting, so I enjoyed the perspective. Also, I had to mention that I can't not think of Baron Werner Ünderbheit when I saw what you did to the face shield.
I started painting minis this year and my favorite legion to pant has been Iron Warriors. I'm going to give some of the methods in this video a try
holy hell thats awesome, and well done for coming back with solutions to the problems. The contrast wash combined with ink after at the start really sets the tone, and im looking forward to trying it with different variations.
As always, thanks for another top quality video :)
That steel is absolutely brilliant!
I use removable sign making vinyl for masking objects. I paint the too be painted sections with watered down acrylic medium. It seals up the edges. After you paint the sections remove the vinyl and you have perfect lines. Like others said pen striping tape is great. As an artist I was really surprised all the cool useful products a sign making catalog contains.
Scale model builder here. What you want to do is a) get flexible masking tape and b) put stripes next to each other to ensure you always have the same distance between stripes. Then you just remove the "in between" stripes that will then reveal the area, that will be spray painted. If you are stingy with tape, you can always just put down a strip, put the "place holder" strip down, put down the next strip, peel of the place holder and put it next to the new tape...rinse repeat.
Wow! This is the one I've been waiting for! So good. Thanks.
You have an older Custodes video. Would you ever revisit them with your current grim dark paint style? Would love to see what you’d come up with there! Cheers!
Great video and you should Tamiya masking tape for curves in your tool box, I am so glad I did.
A perfectly timed video! It's only been in the last few days that I've started thinking about painting my Ork army in an Iron Waaaghiors scheme.
I had thought I would have to fake the Trovarion Technique using the brown paints (as he started the video talking about) but this dull/shiny contrast is much better.
Thank you!
The result speaks for itself, I love it.
Tamiya and Vallejo both make masking tape for curves. They are white tape that bend with minimal deformation to be able to mask off nonplaner surfaces.
you've done well here! hazard stripes are a pain in the back to do no matter the scale. I had trouble doing them at cosplay scale and at cosplay scale. even with painters masking tape the striping still was a pain with the paint finding gaps in the paint
Thanks for sharing your experience! I often use several layers with exactly that kind of medium you used. The video did not specify how much water you did use for the chipping. From my experience it helps a lot to apply a lot of water and let it soak for some time if you want to deal with thicker layers - then even several stacked (thin) layers can be stripped quite well. If you apply a coat of clear varnish before the hipping medium it chips even easier.
Killin it as always. Love the IW scheme
Inspired by the crazy advice that adding a tiny bit of black helps white to cover better (technically it's now grey, but very very pale) I tried adding a tiny bit of red to my yellow and I'm sure that helped too. And I preferred the colour, it was warmer and deeper. I have no airbrush, so even easy coverage with a brush matters.
(This dude looks awesome BTW!)
painting over hues or shades massively increases coverage.
you can get very good coverage in yellow if you paint it over a yellow/white mix or in red if you paint it on top of a red/white mix etc.
I just got done using chipping medium and it was a learning curve for me. I had to use metal tools then go back and repair where the tools went too deep.
I really like the grim dark metallic armor! I was probably one of the ones harassing you for something like this because I am interested in applying it to an army of grey knights. Thanks for suffering for our entertainment and education. I know the youtube game has been frustrating for you but I always love seeing new content from you pop up in my feed.
Super interresting to see the process !
End result is looking great. Stubbornness paid off in the end ! ;-)
I love you so I watched the sponsor part with no skip.
I felt a relief when get to the part with a yellow paint. I'm painting a squad of Blood claws and I need to paint 30 yellow shoulder pads. It's a pain, since when I try to use opaque layer, I receive visible brush strokes. So instead I'm using diluted paint. And I need to make a layer, after layer and layer... Now I know that I'm not alone....Thank you!
hey, I saw this video this morning!.. but who will believe me...
I do :)
@@trovarion haha, that's nice from your side :)
The end-result looks awesome!
Overall, this is very nice work, and you're certainly better with an airbrush than I ever will be!
A couple of notes of minor critique: white, then yellow is the standard approach, if laying yellow on anything darker than light gray; one idea you might have considered was using a slightly-gray white under the yellow and then when peeled back, it would suggest primer paint (think of the shade used in automobile work).
Subtle browns before the orange on the yellow would've built up tonal variety and felt more weathered. I really like using Windsor and Newton inks for that. You could've also used some brass / copper to break out some of the detail areas on the metallic parts (for example, the knuckles on the hand) with little touches here and there before the wash steps. The blue / brown is an interesting approach; I usually do diluted black, then browns, then orange, then back again w/ blacks where additional fluid leakage / smoke / etc. would be seen. Copper gets a whitish green, rapidly rubbed back, to suggest copper oxides.
The jetpack could've used some blue / purple to suggest metals that have been heated.
If I've learnt one thing about a good grimdark scheme, it's all about the surface finish variation.
Fantastic video. I'd love to see you apply your technique to cloth and skin. Maybe a grimdark AoS model?
You fought through defeat and endured. Iron Within, Iron Without!
The blue contrasr paint blew my mind.
Here is a small tip for you.... When painting straight lines over a curved surface you need to use thin strips of 1mm Tamiya masking tape this allows you to manipulate the line around the curved surface
Awesome video, as always!
So, maybe Trovarion style grimdark custodes?)
You can get flexible masking tape which works on things like planes etc
With yellow, you generally want to start with an ochre or brown base to build up. That fixes a lot of the coverage issues.
The solution to curved masking is "Flexible Masking Tape".
It's blue.
It's the same kind of tape as the plastic electrical phase tape, but it comes in millimetre widths. 2mm works well.
It conforms to curves and spheres really well.
This is perfect for TMM. Picked up some inks and went to town on some space dwarves. Thanks for the neat trick.
I painted scaly armor on my Alpha Legion army, so I know your pain. Doesn't help that my first Rewards of Treachery Unit were Night Lords Night Raptors.... that got damned lightning took me forever.
Definitely adapting this for my iron snakes phobos kill team!
Welp, this video appeared on my feed and I thought it was a Squidmar video.
Well played sir, well played.
apparently you gotta be squidmar to make people click videos
We have hello fresh here in DK too, and it is actually ok.
Now on the important part:
Now that is an Iron Warrior ❤
Really enjoying this series!
Should have added some of that red dust pigment at the intake of the jetpack because that's where a lot of dust would be sucked in
I’ve found that the key to masking curved surfaces is to use 1-2mm wide masking tape. It can bend nice and uniformly and then you can fill in the area with thicker strips of tape.
I just learned last week that Tamiya has white flexible masking tape. Maybe that would cover a curve just a little better than the more rigid paper masking tape? Just a thought.
You overcame the challenge. Good for you. I probably wouldn't have. Frustration freezes projects for me.
Holy hell, that end result is absolutely gorgeous. Everything tied together like crazy, and the base and pigment powder just capped it all off. 🤌🏼🤌🏼🤌🏼🤌🏼🤌🏼
Awesome work 😊
Great video! Been thinking of getting some grey knights but the thought of fully TMM shinyness (or worse NMM level of labour) has kept me from it. Might have a go with this approach instead!
I'm gonna give that metal effect a try the next time I work with metallics.
I like how we went from ordering food, to all day meals in boxes, to here have some ingredients, do it yourself xD
People like to feel that they are actually doing some level of cooking! This is why cake mixes make you add the egg... they don't have to, they could add it in dry, but you adding the eggs yourself gives you that sense of "I made these cakes!"
Nice work. Frustrating, but your skill and perseverance really shined through!
with the black stripes, you actually wanna free hand it, i use a pencil to line it where they need to be first and then just go back and forth with yellow and black till it looks good, that's how you get it all the across the cylinder, the tape is just a tool for straight surfaces.
and seeing they are in a sense chaos marines, it never has to be too perfect of a line, so free handing it isn't that much of a problem as long as it looks straight.
True
Great looking metal, and you really should've gone for the masking goo or whatever other alternative instead of suffering through that headache. Flat stripes being completely fucked when applied to a curved surface is to be expected and would have me reconsidering my approach really fast.
The armor looks fantastic after dulling it down then stippling silver back over it.
I think it's kinda funny that there's hazard stripes except where there's actual hazard around the thruster...
I always freehand my hazard stripes. Messing around with masking tape looks like a nightmare. Mind you I thing using an airbrush is too much hassle as well.
Beautiful!
Using and gray undertone makes it way easier to apply yellow 🔥
yes. basically what i did in the second bass, only using white and getting the added benefit of the contrast paint giving a more vibrant yellow.
I like using masking fluid when doing the hazards strips. Functions like masking tape to cover surfaces but is painted on.
Foind it working so well when painting blades on ork boys and on a n Ambot for Necromunda.
This video was as always, highly enjoyable.
Metal looks so good, I thought you were scraping paint off of bare metal in the thumbnail. Confusion set in when the vid started with a plastic mini.
Attach the masking tape together at at least one end before applying it to the surface. That might help keep the spacing consistent.
i know about that and that works on straight surfaces or ven large cylinders. but that's not really true on the curved AND tapered shoulderguards.
@@trovarion Just a thought.
That's something I never understood about all the different yellow paints I've used.
They all have bad coverage, don't flow well no matter what you do with them, and require multiple layers to get a solid color.
Why is that? What is it about yellow that makes it such a nightmare to paint with?
I really enjoy this channel, most other painting youtubers paint so differently than your average wargamer i dont even feel like its the same hobby haha
Pro tip btw from someone who's done hazards for years, just eye ball it.
Seriously, its much easier than it looks and its worth it for all the time and effort you'll waste faffing with tape, even on a flat surface.
Would the cotton swab soaked in isopropyl alcohol helped to remove some of the yellow paint in a more controlled manner?
Trovarian, you know what you do if you’re having trouble with a technique on a mini (ahem, hazard stripes)? TH-cam it, duh😂 that’s how I found YOUR channel. I would’ve thought that would have been a TH-camr’s first instinct to do lol anyway pretty cool paint job and I love your grim dark series. They are masterpieces🤌🏽
Appreciate the iron warriors representation! Great tutorial
Really dig the metal color, what was ink/medium did you use to make the brown glaze? I would love to try something like this on my Knights
yep, that curverd lines are a bit problematic to mask, there as some elastic mask tape that works really good, (blue or white tape color, dont rememeber)
cool finished effect. Model looks great!
Whats the lamp behind you in the parts where you're talking to the camera? Another great video though!
just the first random lampshade lamp that came up on amazon back when I bought it
a Trovarion Travesty? Sounds like a great catch phrase or a name of a mini seires covering projects that go wrong or other crazy behavior :p
I use chipping effects quite a bit with 1/35th scale military models, although I at times still use, Ive tried all the commercially available AK-MIG-AMMO types & found using a FINE-mist aerosol hair spray is MUCH more cost effective, as chipping medium is pretty much the same stuff w/o fragrance additives (Treseme FINE/Ultra Fine, no fragrance med/high hold, fine/black aerosol cans, work best for me after trying MANY different brands of hair-spray products. 2-3 light coats & youre all good for later effects IF top-coated with an air-brush) 'AK Worn Effects' & similar products are akin to re-bottling exact same hair-spray products with some formula tweaks in much smaller quantities & charging thrice as more for the product!?... (Like re-bottling $12.00 per QUART Minwax oil-base wood stains for 'Streaking Grime/Rust' products & $elling ONE fluid OUNCE bottle for $8.00!?;)
-Alot like home-commercial decorative/faux paint glazing products, charging uber-high $$$ per gallon, when one can simply use 'Flood' brand 'FLOETROL' paint conditioner/additive as a glazing substitute for MUCH le$$ money spent per gallon. (Floetrol IS a glazing compound, pretty much just a 'paint' carrier fluid w/o additional pigments & binding products;)...
-As I have too, you'd found the chief issue with hand-brushing over ANY chipping effects products or hair-spray. Airbrushing top-coat over the chipping medium is MUCH more effective. Even if the pre-top/finish coat chipping medium is sprayed on n' fully dry/cured, upon re-wetting it with a brushed on top coat, the chipping medium then reconstitutes & then COMBINES with the brushed paint, thereby deleting, diminishing & diluting the chipping medium & its hoped for later chipping effect. Even moreso when high total thickness/MM paint built-up begins with multiple light/neutral base coats being brush applied to achieve a more opaque color profile (Yellows/reds/purples/etc)...YES, its aggravating!...Ha!
-What your showing here HELPS so MANY miniature painters to avoid frustration, or ruining projects/products. GREAT work my man, keep it ^UP!...;)
This would be a fun technique for the Order of the Argent Shroud too.
Tamiya makes a flexible tape for RC car painting. I think it’s white. I have some in the garage I’ve used for lexan bodies then I use blue painters tape to mask off the large areas. Might work for stripes. I think the tape comes in a bunch of different widths.