❤ super tare, foarte frumos pregătit pentru montarea pe mașină, așa se face corect treabă nu plin de mizerii și uleiuri, felicitări pentru munca depusă
very cool, here in Brazil these engines are used a lot in drag racing, I have a 2 liter with multipoint injection 4 injectors that I'm going to put in my Gol 1985 (a car with similarities to the 1st generation golf)... a strange fact in the part where you show the face of the head, it doesn't have the pit where the combustion chamber forms? in the headstock of our ea827 they have the armhole and the valve is inside...
I have a question, is the MK 5 Golf 1.6 8 valve engine with 102 hp the same block as the older mk 2 and mk3 GTI's ? Do GTI parts fit on this engine ? Which independent throttle bodies will fit this engine?
Hello. Asking for a 1.8 EA827 with 2E2 in an Audi 100? I have this rattling for a few minutes when it's cold. Also, when I let off the gas there's like a push pull jerking motion going on from the engine. I invested some money and changed hydro lifters, and everything around them and had the valves and valve seats polished. But all these problems are still there. Any advice? Rest of the car is great, just the zylinderkopf that's troublesome.
It's a H block very rare. I have my gti 1.6 eg since 2014. I only know from this week that I have such a block. They say it's better to tune. How much power you get out this block?
@@schuberttuning5849 Ah, thanks. I am interested to do similar, maybe even 81mm... did you machine the pistons at all? Would you share those piston part numbers? Cheers
❤ super tare, foarte frumos pregătit pentru montarea pe mașină, așa se face corect treabă nu plin de mizerii și uleiuri, felicitări pentru munca depusă
very cool, here in Brazil these engines are used a lot in drag racing, I have a 2 liter with multipoint injection 4 injectors that I'm going to put in my Gol 1985 (a car with similarities to the 1st generation golf)... a strange fact in the part where you show the face of the head, it doesn't have the pit where the combustion chamber forms? in the headstock of our ea827 they have the armhole and the valve is inside...
I have a question, is the MK 5 Golf 1.6 8 valve engine with 102 hp the same block as the older mk 2 and mk3 GTI's ? Do GTI parts fit on this engine ? Which independent throttle bodies will fit this engine?
Its golf1 GTI 1.6 engine,very different engine.golf 4 1.6 Sr have o2 sendor,crossflow head,injectors,doent carbs.
@@schuberttuning5849 I see..thanks for the info
Hello. Asking for a 1.8 EA827 with 2E2 in an Audi 100? I have this rattling for a few minutes when it's cold. Also, when I let off the gas there's like a push pull jerking motion going on from the engine. I invested some money and changed hydro lifters, and everything around them and had the valves and valve seats polished. But all these problems are still there. Any advice? Rest of the car is great, just the zylinderkopf that's troublesome.
It's a H block very rare. I have my gti 1.6 eg since 2014. I only know from this week that I have such a block. They say it's better to tune. How much power you get out this block?
With carbs it can 120 130ps
@@schuberttuning5849 nice
@@schuberttuning5849 with turbo how much ps it will produce?
@@Sweex9998 depend, which turbo, which ecu, which injektors
I now the existing of the schrick turbo.
But is it possible to place a turbo on eg?
How much HP?
why porsche pistons?
biggest and it can be make biggest CR
@@schuberttuning5849 Ah, thanks. I am interested to do similar, maybe even 81mm... did you machine the pistons at all? Would you share those piston part numbers? Cheers
Would this work with G60 (81.00 bore) pistons?
did you increase the capacity from 1.6?
@@schuberttuning5849 Do you build 1.8 8v carb engine and it's gear box please for someone to buy from you. I will be very thankful to hear from you.
Hello, you have a link of your website ?
I'm looking for a EG motor in any condition
Its that, and for sale
@@schuberttuning5849 can I buy it
@@timsweden2460 yes, please contact with leventeschubert@gmail.com