Arduino IoT Cloud Based Home Automation & Appliances Control Project using ESP32

Up to 20%-30% off for PCB & PCBA order:
Only 0$ for 1-4 layer PCB Prototypes:
www.nextpcb.com/?code=Htoeletric
Register and get $100 from NextPCB:
www.nextpcb.com/register?code...
𝗣𝗿𝗼𝗷𝗲𝗰𝘁 𝗗𝗲𝘀𝗰𝗿𝗶𝗽𝘁𝗶𝗼𝗻:
In this project, we will learn about the application of Arduino IoT Cloud. As an example, we will be controlling multiple home appliances from the Arduino IoT Cloud Dashboard. We will interface a 4 channel relay with ESP32 WiFI Module.
We will send the ON/OFF commands either from the mobile phone dashboard or from Computer Dashboard and control Bulb, LED, Light, Relay or any electrical home appliances. So, let’s see how can deploy this entire system & make Arduino IoT Cloud-Based Home Automation & Appliances Control Project.
𝗣𝗿𝗼𝗷𝗲𝗰𝘁𝘀 𝗟𝗶𝗻𝗸𝘀 & 𝗦𝗼𝘂𝗿𝗰𝗲 𝗖𝗼𝗱𝗲: how2electronics.com/home-auto...
....................................................................................................................................................................................................................................
Drop a like if you liked this video.
Don't forget to subscribe to our channel for more Electronics projects and tutorials.
Website: www.how2electronics.com
Facebook: / how2electronics
Instagram: / how2electronics

[@infinitegaming2897]

This one is awesome.... Thank you for making this project for us 😊😊🙏🙏

[@mdamzad3348]

very nice i have done this after many attempts ,i have seen many vedio but not helpfull after all this i tried 6/7 hours by ur vedio then successed. tnx very much

[@anokhautomation4453]

👌👌👌👍👍🎉🎉nice project and tutorial. Very very useful. Thanks for sharing.

[@emmanuelgeorge1342]

Thanks for this video please I was able to control my appliances using my phone hotspot. But can I be able to control light in Nigeria if am in UK what should I do thanks

[@diyprojectslab1689]

Thanks Bro For uploading this video 🙃🍻

[@nishant111992]

Thank you so much.
it works.
Tried many other ways with different videos but failed.
this tutorial is really great.
Done at first time.. thanks a lot for sharing.

[@cjtechnologies7576]

Which id should we give in the codes
Thing ID or device ID

[@user-mh5ic8ex3k]

Which modulation technique is used in this project?

[@fantumt3ch387]

Thanks for the video

[@rameshk.pandey6883]

WHY MY NODE MCU NOT CONNECTING WIFI,PLEASE TELL ME THE SOLUTION, I HAD CHANGE SO MANY NODE MCU ,BUT SAME/ IN NETWORK SECTION I PUT SSID NAME AND PASSWORD FOR WI FI, IS IT CORRECT? PL. RPLY

[@prashantkaigaddi4349]

Hi mam/sir I'm getting error while uploading a code to the device I don't know what to do please give any solution and code is correct.i don't what to do.please reply me as possible

[@budiprastyo4148]

What is the scheme if implemented with MCB?

[@dilshankasthuriarachchi4737]

Wow nice buddy😊😊😊😊😊

[@unbreakabledesire14]

Didi mera Manual switch bina hotspot connect kiye kaam nhi kr raha hai ek baar hotspot connect krne ke baad switch kaam kr raha or hotspot band kr raha phir bhi switch kaam kr raha lekin stating me mujhe ek baar hotspot connect krna pad raha phir switch kaam kr raha , Mtlb switch ko Initialise krne ke liye hotspot connect krna pad raha jo ki acha nhi hai if phone nhi raha to switch kaam nhi krega PLZZ SOLVE THIS PROBLEM..🙏🙏

[@sonikatm6477]

Can you share the program?

[@jeelramani35]

What if i use this smart switches in my home daily
Means ye daily use karne se bidgad to nahi jaega na?

[@electromodule7987]

Load kr uper depends krta hu
Agr aap 6 amp ki relay par 3-4 amp current flow kr rhe h to aaram se chlega
Nahi hoga kharab

[@jdadvertisings1227]

Will it work if i am at another city?

[@om25396]

Yes

[@tmfarid7470]

can I know what adapter do you use
can i use lower than 10 A as adapter power supply

[@electromodule7987]

If your relay at 5volt please use 5volt and 1 amp AC adapter
If your relay at 12 volt please use 12volt 1 amp adapter
For esp32 board please use 5volt 1amp AC adapter
Thanks 🙏🏻

[@tmfarid7470]

@@electromodule7987 for out relay ,can I use ac ?

[@electromodule7987]

@@tmfarid7470 yes
In above I am talking about relay supply
And in switching contacts you used AC and DC both

[@markperkins9437]

This was. good video but WAY TO FAST.

[@saravanansenthilvel9614]

Is the power source is ac or dc

[@saravanansenthilvel9614]

Cqn we control any types of devices

[@HowtoElectronics]

Yes control any home appliances. The device is power via 9v adapter or 5v usb port. But appliances need 220V AC

[@saravanansenthilvel9614]

Ok thanknu

[@saravanansenthilvel9614]

Bro range for controlling

[@HowtoElectronics]

World wide as it is based on internet.

[@shakerileiwat4341]

Great 👍👍👍
Is the Arduino cloud free?

[@HowtoElectronics]

Its free but you can upgrade for more features.

[@mazevedo852]

Hi. Very nice project, but where is the 𝗣𝗿𝗼𝗷𝗲𝗰𝘁𝘀 𝗟𝗶𝗻𝗸𝘀 & 𝗦𝗼𝘂𝗿𝗰𝗲 𝗖𝗼𝗱𝗲?😊
I Can´t find it in the link you give.😊

[@HowtoElectronics]

It will be updated tomorrow.

[@mazevedo852]

@@HowtoElectronics thanks, thanks, thanks.

[@technophile01]

Nice but not free!!!