How to Replace Rear Wheel Bearing & Hub Assembly 2009-2010 Pontiac Vibe

Buy Now!
New Wheel Bearing & Hub Assembly from 1AAuto.com 1aau.to/ia/1ASH...
This video shows you how to install a wheel bearing and hub assembly on your 2009-2010 Pontiac Vibe. Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision.
This process should be similar on the following vehicles:
2009 Pontiac Vibe
2010 Pontiac Vibe
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oa/1AXA...
• Pocket Screwdriver
• 12mm Socket 1aau.to/oa/1AXA...
• 14mm Socket 1aau.to/oa/1AXA...
• 21mm Socket 1aau.to/oa/1AXA...
• Brake Caliper Compressor Tool. Single Piston. Lever Style. 1aau.to/oa/1AXA...
• Torque Wrench 1aau.to/oa/1AXA...
• Brake Grease
• Brake Parts Cleaner
• Cloth Rags 1aau.to/oa/1AXS...
• Copper Anti-Seize
• Gloves 1aau.to/oa/1AXS...
• Rust Penetrant
• Safety Glasses 1aau.to/oa/1AXA...
• Surface Prep Discs 1aau.to/oa/1AXS...
• Bucket
• Floor Jack 1aau.to/oa/1AXA...
• Hammer 1aau.to/oa/1AXA...
• Pick 1aau.to/oa/1AXA...
• Wheel Chocks
• Wire Brush 1aau.to/oa/1AXA...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@donovang6911]

Fantastic! Thank you. I have a 10' vibe AWD. Just did the front wheel bearings using a previous video by yourself. Covered everything in detail. Going to do the rear before the snow here in CAD!!! :) Much appreciated that you included the torque specs!

[@brucefriis3266]

Excellent video. Every step was so clear on the video and the audio. Thanks so much!!

[@edwindavid1090]

You are one of the best

[@sitindogmas]

perfect video, just need the tools and the muscle.

[@scottkenreich878]

Are you sure that’s an 09-10 Vibe? I have the 09 base model with 2.4 engine and there is no internal drum emergency brake like what’s shown (it’s bolted on and is part of the caliper assembly)and the suspension looks different than that. Is this titled correctly? Could it be an earlier years model?

[@allautollc1]

Thanks for the very detailed video.

[@JakeCamVids]

Is this for front wheel drive?

[@leothalion3983]

Does this work for 2010 Matrix

[@jonathankr]

What if it's a rear drum?