Audi RS7 Front brakes DIY

แชร์
ฝัง
  • เผยแพร่เมื่อ 4 ม.ค. 2025

ความคิดเห็น •

  • @qasimsiddique2372
    @qasimsiddique2372 ปีที่แล้ว +2

    GOOOD WORKKKKK
    I found the video tutorial on Audi RS7 front brakes DIY to be highly informative and insightful. It provided a step-by-step guide on how to replace the front brake pads, which is a crucial maintenance task for Audi RS7 owners. The video demonstrated the process clearly, making it easy to follow and replicate for those who want to perform the task themselves. Overall, I highly recommend this video tutorial to anyone who wants to learn more about Audi RS7 maintenance.
    Thank you!!!

  • @alexmaster5251
    @alexmaster5251 ปีที่แล้ว

    What newton meters do you need to tighten the two screws behind the carrier?

  • @miguelacosta6595
    @miguelacosta6595 10 หลายเดือนก่อน

    What’s the size of the 10 point socket needed for caliper removal? And what year is your car?

  • @buust1000hp
    @buust1000hp ปีที่แล้ว

    Are you sure you put the spring in the correct position? I've seen them installed reversed of yours.

  • @blairkiwinz
    @blairkiwinz ปีที่แล้ว +1

    any chance you do a rear brake replacement video, spark plugs, air filter? You Tube is devoid of any videos on these DIYs

    • @SheziMotorsport
      @SheziMotorsport  ปีที่แล้ว +2

      @blairkiwinz - yes I already did them last fall, if you message on Instagram, I could give you steps.
      Most important is you have to put the car in service mode using obdeleven or Vagcom or other tools, which will let you turn the caliper and you have to do this before opening the brake components

  • @banger881
    @banger881 ปีที่แล้ว

    What year was this car ? You didn't explain

  • @julianharrington7262
    @julianharrington7262 ปีที่แล้ว

    🎉 *promo sm*

  • @thehackerpro007
    @thehackerpro007 ปีที่แล้ว +3

    Nice, audi quotes 4-5 grand for this all 4 brakes and rotors. 😂

    • @cynthiajordan7511
      @cynthiajordan7511 4 หลายเดือนก่อน +1

      Just purchased mine. Mercadez in Denver, they went the cheep route and only replaced pads. I’m wondering now if they disconnected the sensor😢

    • @SheziMotorsport
      @SheziMotorsport  4 หลายเดือนก่อน

      @cynthiajordan7511 - you can check either by inspecting the car and using obdeleveb. If wires are super dirty then they didn't, and is car telling you that brakes needs replacement?

    • @cynthiajordan7511
      @cynthiajordan7511 4 หลายเดือนก่อน

      @@SheziMotorsportNo it’s not. No dash light but squeaking and rotors are at 34 mm 1 mm above wear limit.