Tip 3 to use an air filter still does not fix for tip 3 problem of contaminates escaping the top area. Indoor air filter might help a bit. Better to spend your money on that and run the hose out a window. Use an inline air mover to extend the hose and increase outward airflow
No need for goggles with this, the green lid totally protects your eyes and the machine shuts off if you lift it whilst it’s on to avoid any risk of injury.
Good tips but this is an unrealistic diy tool for your average diy person. As I see it the only people who have an Xtool are the ones who have been sent them for free to review.
About the fumes; you say there is still smoke and fumes inside the machine so what is the air purifier doing to avoid this?
It just pulls out the majority of the fumes, certainly not 100%
Well if there are leaks through the case, how does the purifier helps you ? 🤔😀
The purifier does catch most of it, but it doesn’t totally kill off the smell so cleaarly something is escaping.
Tip 3 to use an air filter still does not fix for tip 3 problem of contaminates escaping the top area.
Indoor air filter might help a bit.
Better to spend your money on that and run the hose out a window. Use an inline air mover to extend the hose and increase outward airflow
That's a good point! Thanks 🙏
Thanks M8. Not in the market but nice tips. Take care & stay safe.
Thanks, you too!
I read that the S1 is a Class 1 laser that does not need the user to use goggles. Do you need to use goggles if you use the riser/conveyor?
No need for goggles with this, the green lid totally protects your eyes and the machine shuts off if you lift it whilst it’s on to avoid any risk of injury.
@@sumeraybuilds Do you need to use goggles if you use the riser/conveyor? The riser has front/rear openings.
Im NOT atoll jealous 😬😬😬 wicked though m8 can't wait see what you come up with. Wish i could afford one. 👍🏴
Haha 😂 yeah I’m looking forward to getting started with it. Once the workshop is built!
@@sumeraybuilds once the workshop is built who you kidding you'll be in about that before the workshop is built. Speak soon. 👍🏴
You forgot a main one. Read the instructions and learn the software.
Very true 😂
This is the 40 wat correct? Is there gonna be a massive difference between this and the 10 and 20 wat and don't say 20 and 30 wat 🤣 🏴👍
Yes it's a 40W. You'll mainly notice the difference when it comes to cutting. 20/ 30W won't get through as thick of a material.
@@sumeraybuilds that was kinda my fear looks like Al have to save and hope they drop the price of the 40w after Christmas 😬
Good tips but this is an unrealistic diy tool for your average diy person. As I see it the only people who have an Xtool are the ones who have been sent them for free to review.
I can’t really disagree 😂
Best comment ever! Xtool spends a lot of money giving these out for free to reviewers.