NodeMCU Motor Shield L293D for ESP12E + Blynk
ฝัง
- เผยแพร่เมื่อ 3 ต.ค. 2018
- NodeMCU Motor Shield L293D for ESP12E + Blynk
Control DC Motor via WIFI using L293D Motor Shield Board for ESP8266 use the app Blynk
www.blynk.cc/
Link Sketch : github.com/makertut/NodeMCU-L...
::::::::::: SUPPORT CHANNEL ::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
Please Donate To Help Me Afford New Equipment And Software To Make My Videos More : goo.gl/1m8Dg2
Don't forget to subscribe! - วิทยาศาสตร์และเทคโนโลยี
OMFG FIIINNNAAALYYY.
After 7 Hours of work and search i was nearly giving up. This tutorial not even gave me access to a Smartphone-control it even let me understand the shield. I wasnt able to let them run on my own. THANK YOU.
are there any schematics or datasheet for the expansion module board ( L298) ? How do you know what GPIO control the motors?
Can you perform this similar experiment with esp32 board and L293d expansion module?
I am having difficulty getting to your sketch the URL is bad. I would really like to see it, thanks in advance
The link to the code is to site no longer in use. The redirection doesn't work as the page (domain) is not found.
Actually you can use any motor shield for esp models and it's work just choose right female to male jumpier Wires
very useful video. Thanks.
класс. спасибо .завелось с первого раза .вы лучшие !!!!!
Ас ок
Множество примеров не получилось.Как вам удалось?
У меня моторы реагируют одинаково на любые манипуляции
В мене тоже
Can I directly link 7.4v lipo battery to the shield?
hello, do you have any tutorial where to use the timer?
al colocar la placa no se conecta con blynk. por que puede ser ?
Thanks a lot
Hi you are so good personality.
really good video !!!!!
I have one problem can you help me?
When I upload sketch to nodeMCU board, arduino program repords error "lynkSimpleEsp8266.h: No such file or directory"
update blynk library in your arduino computer software
You need to add Blynk library to your Arduino IDE. If you have done so, maybe your spelling: it is "B" not "l".
Nice very nice
hello. i am a newb. i need to know where and how to get the library/code to make this work. help me please
This is great
thanks much
Wich power source should i use
👍👏
I have a problem, the problem is that the phone won't connect with the robot and they said wasn't online yet while I do a perfect televerering. Can anybody answer me ?
Hello, I want to know what is the librairy for the code. I upload all the possible librairy but it doesn't work
ty and have a good day or night
this happen... most of the time XD
Can The Code be used for 1 stepper motor (NEMA 17), Tks ?
th-cam.com/users/shortsHysOlntyJLU?si=-sRqOIgJtNoqL-9O
muy bueno
moving forward doesn't work, why ?
THANK👍👍👍🌷🌷🌻
Cannot open sketch
Code link is not available
help , ...please you send me for sketch program .................
Why you used l293d? Not l298n?
Have you read both spec sheets? This is the first thing to do. Then you would know that the L298N simply supports greater voltage and current, not needed for the motors used.
I have NodeMCU V3 CH340, any body know which motor shield I should buy?
I also searched no shield is here
I ended up with 2 piece of L298N module
@@reddingtonjoestuff3207 now working
@@reddingtonjoestuff3207 and which power source will you use
@@Made-In-Heaven idk, that component still on shiping
cannot find ESP8266WiFi.h
maybe you have not installed into your Arduino IDE. Try to follow this: circuits4you.com/2018/06/21/add-nodemcu-esp8266-to-arduino-ide/
#define BLYNK_PRINT Serial
#include
#include
#define derechaMotorSpeed D5 //14
#define derechaMotorDir D6 //12
#define izquierdaMotorSpeed D7 //13
#define izquierdaMotorDir D8 //15
char outh[] = "copiar el token ";
char ssid[] = "..........";
char pass[] = ".......";
int minRango = 312;
int maxRango = 712;
int minvelocidad = 450;
int maxvelocidad = 1020;
int novelocidad = 0;
void moveControl(int x, int y)
{
if(y >= maxRango && x >= minRango && x= maxRango && y >= maxRango)
{
digitalWrite(derechaMotorDir, HIGH);
digitalWrite(izquierdaMotorDir,HIGH);
analogWrite(derechaMotorSpeed,minvelocidad);
analogWrite(izquierdaMotorSpeed,maxvelocidad);
}
else if(x = maxRango)
{
digitalWrite(derechaMotorDir,HIGH);
digitalWrite(izquierdaMotorDir,HIGH);
analogWrite(derechaMotorSpeed,maxvelocidad);
analogWrite(izquierdaMotorSpeed,minvelocidad);
}
else if(y < maxRango && y > minRango && x < maxRango && x > minRango)
{
analogWrite(derechaMotorSpeed,novelocidad);
analogWrite(izquierdaMotorSpeed, novelocidad);
}
else if(y = minRango && x
@Kuriboy13 works
@@cankantarc6507 no it doesnt
How can I find the arduino code?!?!
github.com/makertut/NodeMCU-L298D
@@MakerTutor101 WHICH LIBRARY DO I HAVE TO USE?
Potential malware on the qBqDBa link, lots of redirects. Poster please fix that link or remove it. Good video besides that. Thank you.
if (person == girl && person == engg )
{
serial write ( !! CRUSH !! ) ;
}
#define BLYNK_PRINT Serial
#include
#include
#define derechaMotorSpeed D5 //14
#define derechaMotorDir D6 //12
#define izquierdaMotorSpeed D7 //13
#define izquierdaMotorDir D8 //15
char outh[] = "copiar el token ";
char ssid[] = "..........";
char pass[] = ".......";
int minRango = 312;
int maxRango = 712;
int minvelocidad = 450;
int maxvelocidad = 1020;
int novelocidad = 0;
void moveControl(int x, int y)
{
if(y >= maxRango && x >= minRango && x= maxRango && y >= maxRango)
{
digitalWrite(derechaMotorDir, HIGH);
digitalWrite(izquierdaMotorDir,HIGH);
analogWrite(derechaMotorSpeed,minvelocidad);
analogWrite(izquierdaMotorSpeed,maxvelocidad);
}
else if(x = maxRango)
{
digitalWrite(derechaMotorDir,HIGH);
digitalWrite(izquierdaMotorDir,HIGH);
analogWrite(derechaMotorSpeed,maxvelocidad);
analogWrite(izquierdaMotorSpeed,minvelocidad);
}
else if(y < maxRango && y > minRango && x < maxRango && x > minRango)
{
analogWrite(derechaMotorSpeed,novelocidad);
analogWrite(izquierdaMotorSpeed, novelocidad);
}
else if(y = minRango && x
Sir can you mail it plz
mdjunedjazri2011@gmail.com