You do great work! You painted it in a garage and it looks better than a lot of guys' paint jobs done in a $30K paint booth. I just put a new cab corner on my old truck and your videos showed me exactly how to do it right. Thanks for all the help!
Looking really sharp. When I get over these cancer treatments I will start the disassembly on my 64. If mine looks half as good as yours I will be happy. Mike
You've done really good work on that vehicle...I like the red..it looks just a little on the pail side which is nice..It's not just another "fire engine or candy apple"...good job mate.
This is amazing, please, even if it's just a video of you installing the wing window, post as many. Videos as you can, I have a 63 c10 as well and watching this helps a lot
I must have missed the engine/trans/exhaust install video. You got a show truck in your future....looking great. Buy the replacement trim, looks better down the side all the same finish and no dings/dents!!
+gibson63 Hello Gibson 63 I have been workin on my Dad's 64 GMC for the past seven years. I have went through the so called "body men" promising to work on it and promising to finish it up for me. Then keeping it for a year and doung nothing but still charging me $40.00 an hour for it sitting in their garage. Evidently Chip Foose is not going to shop up at my shop in Oak Ridge Tennessee to do a remake of his Over Lord episode but doing a GMC. I just wanted to say I am very impressed with your patience and skill. You have inspired me to get in there and "Git er Done". You would be a great contact for little bits of info and advice. You should set up a website to do so. You truck is sweeeeeet, keep up the good work. Take 'er easy. Respectfully, Tim Carpenter
+gibson63 Thanks brother. where did you get it? I can't find the green/tint windshield for my 58. I've looked at lmc, classic trucks, Tucker's, ecklers, Jim Carter classics. No one seems to have it.
I’m trying to find the one to where you painted the inside of the cab the headliner overhead part is a challenge also I wanted to ask if you was in a c10 truck club in Memphis I was just wondering cause there’s a club in my area In Arkansas
@@Gibson63. Thank you, very clean and neat work on both trucks . The people from Precision do they have a web site? Thank you for your answer and vídeos .👍🏼
That truck would put a smile on my face every time I came out to the garage!
Absolutely fantastic job sir!
Thanks
You do great work! You painted it in a garage and it looks better than a lot of guys' paint jobs done in a $30K paint booth. I just put a new cab corner on my old truck and your videos showed me exactly how to do it right. Thanks for all the help!
Thanks for watching man good luck on the old pickup
Great update!!! You must be so excited every time you walk in your garage and see it. It looks amazing.
Looking really sharp.
When I get over these cancer treatments I will start the disassembly on my 64.
If mine looks half as good as yours I will be happy.
Mike
Hope everything goes well on your treatments mike can't wait to see some videos on the 64
You've done really good work on that vehicle...I like the red..it looks just a little on the pail side which is nice..It's not just another "fire engine or candy apple"...good job mate.
Thanks
your pickup is going to look unbelievable !!!!! Love the custom trim package and the optional big back window.
You are doing a great job with you truck!
Man, that red knocks me over every time I see it. Beautiful. Nice that you have some "live" music while you're working :-).
Thanks man, but this guy keeps playing the same tune over and over
:-) I'm afraid that's the story of most people's lives.
Wished you would have taken video of the windsheild install. Im getting ready to do that on my 63
Excellent work as usual. It's going to be a really sweet ride.
Man, this truck is just turning into a work of art, try to leave some trophies out there for the rest of us when it is done 8)
Awesome.. Nice work. doing it right! Thanks for sharing
This is amazing, please, even if it's just a video of you installing the wing window, post as many. Videos as you can, I have a 63 c10 as well and watching this helps a lot
Haven't been turning the camera on lately I'll try to get back in gear
That is looking very nice, great work on ol red
Wish I had those skills. Great job brother!
Thanks for watching man
I must have missed the engine/trans/exhaust install video. You got a show truck in your future....looking great. Buy the replacement trim, looks better down the side all the same finish and no dings/dents!!
Forgot to mention I already have the side molding trim for the truck I bought new as well Thanks
+gibson63
Hello Gibson 63
I have been workin on my Dad's 64 GMC for the past seven years. I have went through the so called "body men" promising to work on it and promising to finish it up for me. Then keeping it for a year and doung nothing but still charging me $40.00 an hour for it sitting in their garage. Evidently Chip Foose is not going to shop up at my shop in Oak Ridge Tennessee to do a remake of his Over Lord episode but doing a GMC. I just wanted to say I am very impressed with your patience and skill. You have inspired me to get in there and "Git er Done". You would be a great contact for little bits of info and advice. You should set up a website to do so. You truck is sweeeeeet, keep up the good work.
Take 'er easy.
Respectfully, Tim Carpenter
man u make me proud to be home builder
Keep up the great work and videos
Well man alive I do believe you got her on the run now lol.looking great keep it going!
Fantastic paint work by the way
That is looking awesome sir.
Thats amazing ! paint looks incredible.
Looking fantastic!
looks awesome Really nice job
She really is looking sweet and smooth. Very, very nice job indeed. Quality shows.
Beautiful.
Thanks man take it easy
+gibson63
is this clear glass or tinted green? I'm trying to decide what I would want on my classic
+John Kirkland I have the Tented green glass
+gibson63
Thanks brother. where did you get it? I can't find the green/tint windshield for my 58. I've looked at lmc, classic trucks, Tucker's, ecklers, Jim Carter classics. No one seems to have it.
nice...love those windshields
Wow really looks nice . Is that the 350/330 HP I have that in my 78 camper special
Pretty nice Thanks for sharing
Yes it's a 350 built up a little double hump heads and 1up from stock cam
Man I really like this project!
I’m trying to find the one to where you painted the inside of the cab the headliner overhead part is a challenge also I wanted to ask if you was in a c10 truck club in Memphis I was just wondering cause there’s a club in my area In Arkansas
That truck came out great
looks amazing.
Thanks man ole Camino coming along I see
clean and smooth
Beautiful job on the whole pickup. Did you sand blast the whole truck body or just sand it down?
Dwayne Baker Yes I tour the truck down and had it blasted and then coated in epoxy
Nicest one on this planet
Well.. I'll be like that skeleton before I'm anywhere near your finish on my 62!!
I've went up a few numbers sent I started this truck it takes time when you got a steady job
Nice red.. putting in glass is fun
Yeah pretty fun I haven't tackled the rear yet
gibson63 Yea , still have to do my front.... waiting for the seal to come in
Been watching looking good
Thanks, nice paint job, what's the name of the red
Wa9260 victory red
She is a beauty.
looking awesome ..step side or fleet box
Its a fleet side, I'll be starting the body work on the bed soon
gibson63
my first 63 gmc pickup was a long box fleet side ..now have 63 gmc panel
Question, where did you buy the front winshield gasket?
Mauro Silva Precision
@@Gibson63. Thank you, very clean and neat work on both trucks . The people from Precision do they have a web site? Thank you for your answer and vídeos .👍🏼
Mauro Silva Precision replacement parts
SWEET