Harley Water Pump Replacement
ฝัง
- เผยแพร่เมื่อ 27 ส.ค. 2024
- Has your Mt Rushmore water pump failed? If so check out this video...
Thank you for watching and please stick around and check out some of my other videos. If there is anything you would like to see feel free to shoot me a message and I will see what I can do. Thank you all for your support!! Please subscribe, like and share and I will see you on the next video!!
HD Part #26800107
Closing Music: Bill Gross Each Day
Merch - teespring.com/...
Video Equipment - GoPro Hero 5 - amzn.to/2Uj1aqu
Audio - Tascam DR-05 - amzn.to/2Gmstwr
Microphone - Purple Panda Lavalier - amzn.to/2XcRIXo
Ways to find me:
Facebook - YogiCycl...
Instagram - / yogicycleservice
Contact Info:
Email - Yogicycleservice@gmail.com
Mail - Yogi Cycle Service
PO Box 481811
Charlotte, NC 28269
HD Part #26800107
Just replaced the water pump on my 2014 CVO Ultra. Your video was very helpful. Thanks for taking the time to do this and keep the shiny side up!!
Hey Yogi, thanks for the shout out.
Keep up the good work.
Yes sir, thank you for the video, it helped when I did mine!
Good stuff Disciple Yogi! Informative as always! I didn’t even have that, and still enjoyed the tutorial.
Ha ha awesome thank you!!
Those clamps you are talking about are called "constant tension" clamps and are waaaaay better/neater than worm drive clamps and can be installed/removed with pliers, slipjoint/needle nose depending on access but yes they make pliers specific to these clamps too and they work extremely well and are not expensive.
Agreed thank you for the post!!
They make a clamp tool that locks the clamp open to position it and then release the the clamp
Very helpful appreciate your video thank you
awesome, thank you
Yogi good video just wanted to say I just bought the new pump kit from Harley and it is way more than 375 bucks. Current price from dealer as of May 2024 was 511 bucks and change. Mine is still operating, 38k, but I figured it ain't gonna be any cheaper next year so I bit the bullet and bought it now so it won't be 700 bucks next year.
Holy cow that’s crazy. Thank you for the update. Good info
Yep, just paid that too. There was a time you could order OEM parts from other dealerships for much less than MSRP. Surdyke HD was one of those dealerships. Surdyke sells it for $409, but not allowed to send HD OEM parts (that they sell below MSRP) beyond their region. At least that’s the gist of what i read when I tried.
Could you share the part number of the complete kit pump, support and hoses, please
Yes when I get to my computer I can
HD Part #26800107
@@YogisCycleService thank you for your answer 🍺
Good job brother, you saved yourself a lot of money by doing it yourself, I just watched a video of a guy on TH-cam, I don't remember his channel name but he's only got like 33 subscribers and I'm one of them, anyway his water pump went out and he took it to his Harley dealership and they changed him $800 for the pump and labor, so yep you saved a pretty good chunk of change 💯
Wow. Yeah that’s the whole reason I do my own work and try to help others do their stuff also. Ridiculous
@@YogisCycleService it is, and that's why I try to do all mine as well,👍🏼
The want 511.00 for the part 149.00 per hr. Can't see it will wind up over a thousand bucks they're going to charge you for upgrades and antifreeze
I have the 2016 Ultra Limited the engine light and temperature light is on and it was getting real hot I'm assuming the water pump needs replaced????
Check for error codes first and see what that’s telling you but it’s a safe assumption to say that something is going on
My 2016 tryk is doing the same thing I'm going to fix it my self thanks for the viv..
HELP!!! I keep getting codes 0691- cooling fuse, 1691 & 1693- r & l fans. My cooling fuse keeps blowing. Occasionally I will get 1019- difference- hot. But that code does not come up everytime. Is it more than likely the water pump? I am wondering if I have a wire inside the pump that needs soldered. And that is why the 1019 code only comes on sometimes. I have read that bad wire connections inside the pump are the main issue. And maybe as I go over a bump, it causes the wires to short out inside the pump which is in turn causing my fuse to blow. When I do the throttle test to see if the fans come on, the r- fan does not come on at all. & the left fan only comes on for a split second then the fuse blows. I can't tell if the pump comes on. I took the lowers off and tested the fan today to make sure it is working. And it is working fine. But I am baffled. Does it sound more like the pump than the sensor?
I will try to make some time to look up those codes tomorrow and see if I can give you some places to start trouble shooting
Yogi, great video but will this be the same on my 2015-Harley-Davidson-TRIKE-TRI-GLIDE-ULTRA? Thanks
Thank you for this video. I just finished mine. It was much easier knowing what needed to come off! The instructions are awful at telling you what to remove!
Awesome, glad it helped!!
hello , how do you now de pump is broken , on the free way red light came on . Thanks
Just bought a 2015 ultra limited. Can you ride the bike for short period of time if your water pump goes out? I don't see any cylinder temperature gauge on this one.
Good info thanks
Hi Yogi, I had one question on your new water pump replacement. Did you see any improvement on cooling efficiency from the old style? Thanks.
Just wanted to thank you for this information and about to do my pump swap. Mine went out with just over 17000 miles, just got my tri glide and only put 1500 minors or so fast and already working on it. How it gets better from here. Thank again for the info. Off I go to change it👍🏻
Good luck and I hope it helps and goes well for you
I feel ya man Just got my ultra and I'm working on it 😫
The race in on too one hundred thousand miles. Other than wheel bearing , heated hand grips its been a great bike. I just replaced the rear axle with new and improved, watch on youtube. Doc Harley | Rear Axel Wear | Replacement | Rear Axel Torque Values | Low Country Harley-Davidson
lol game on!! Mine has been good to me too. No complaints
Hello thanks for the video. Does part number 26800107 come as a kit with the mounting plate, clamps, and the electric connector adapter you mentioned? Also do you know if Harley has a cover that fits over the new pump? You mentioned you had a little trouble with it.
Yes that kit comes with everything you need to replace the entire cooling system more or less, minus the radiators. No it doesn’t come with a new cover and actually I need to get a new one still. That one you see got ripped off by a road alligator last fall. If and when I get one I will post something up on it. I think I will get one for my model year bike and go from there versus a M8 cover which I am not sure if the mounting system is the same or not
Dad’s went at 8000 miles!
Can you tell me where you got your kid at because Harley Davidson over here and Maryland they want $511 for it
@@normanleibrand2165 Harley in Rock Hill SC
Hi yogi , i tried to remove the leg fairing where waterpump are but its pain in the arse , do you have any video how to do it ? Thanks
I don’t but check out the video I mentioned in this one. He shows it. You need to post the top inner cover off to get access to the screws that will let you pull it apart
Mine just went today. For the second time. Am I right they can't fit the old pump anymore? Kit is £352 plus tax over here. ($500 plus tax.)
Seriously considering to have a go at this.
I think they stopped producing the stock kind from what I can tell. You may be able to get the Bosch pump but I am not sure how comparable it is. Might make the most sense to just bite the bullet and upgrade as much as it hurts
@@YogisCycleService thanks. It's going in for a diagnosis tomorrow, so we'll see where we go from there. Dash was giving p/n along with the error codes, which was new.
@@Ibis117 that’s what happened when mine went out also. Error codes and p/n numbers
@@YogisCycleService dealer diagnosis suggests coolant temp sensor. Back order to July. MUCH cheaper - if it fixes it.
@@YogisCycleService here's a puzzle for you: last few days, both lamps have come on after a mile or so. Went grocery shopping today, gassed up at the supermarket. Rode seven miles home - no warning lights. Even left it idling while I posted a couple of birthday cards. Weird. Sounds less like the pump, anyway.
Where did you find the replacement part for the water pump?
Harley dealer
Hello How many miles do you have on your 2014 limited? I have 85,000 miles on.mine and replace the water pump a couple of years ago with the updated pump.
I am about 87,000 now and that was around 75,000 when it went out I believe
hello, is it necessary to change the temperature sensor too?
The whole thing comes as a kit so a new thermostat comes internally built in the pump
@@YogisCycleService thanks, how many liters of coolant should I buy?
@@michele6589 I think I used a quart and a half
Are you sure that the upgraded water pump have integrated thermostate?
Yes I believe it is inside the new water pump versus the stock 2014 its external
@@YogisCycleService in my opinion it's just water pump without any thermostat it can be run based on reading from temperature sensor but it doesn't have any thermostat inside
@@bartoszgoralczyk2067 could be. Very possible and I can’t deny that
@@YogisCycleService look in previous pump the thermostat was making two different cycle's with or without cooler's now it's only one cycle
He talks about the other dude rambling on....wow
First you should say. How do you know ur water pump not. Working on ur motorcycle or. How do you check.
Sorry, mine was determined from the error codes it threw and because it was overheating
When you turn the throttle 50% turn the switch on with your start switch off your fans and your pump shall run your fans run your pump don't run your pump is faulty
where is everyone finding the water pump to purchase?? Thanks
I got mine direct from harley, its a retrofit product that will eliminate the old and replace with a Milwaukee 8 pump. I dont think there are very many aftermarket options at this point
@@YogisCycleService Thanks. Found it for less than 300 from a dealer outside NC
@@heybruh3274 I got mine at rock hill. Sorry if I knew you were local I would have sent that
Harley is screwing its customers daily...this is just one example...these water pumps should have been recalled years ago....why are there so many failures and Harley sits quietly on the sideline collecting gobs of cash...its criminal I say!!!
Can’t disagree with ya there. You got a point
You saved yourself $700
Amen that and if that were the case it would still be sitting broken in the garage.
Could you share the part number of the complete kit pump, support and hoses, please
Total waste of 14 minutes. I know what the old pump and hoses look like. I will tune into the other guys video for more instruction.
Those are called "CONSTANT TENSION " clamps-why anybody would prefer worm clamps over these is beyond me!
Uhm, maybe because everyone has a screwdriver and no one has a constant tension assembler? You ain't too bright are ya?