How to Turn a Window Into a Door | Ask This Old House
ฝัง
- เผยแพร่เมื่อ 30 ก.ย. 2024
- In this video, This Old House carpenter Nathan Gilbert helps a pair of homeowners provide safe passage to the backyard for their children by replacing a double window with a sliding patio door and building a beautiful, low-maintenance deck.
SUBSCRIBE to This Old House: bit.ly/Subscrib....
What good is a beautiful backyard if you don’t have a way to get into it? That’s what a pair of homeowners faced when they called the Ask This Old House team for help. Their beautiful home has a fenced-in backyard, but to gain access, the couple’s children would have to walk out the front of the home and through a garden gate.
Carpenter Nathan Gilbert Knew just how to help. He located a double window on the backside of the house that would be perfect for converting to a door. With the couple’s help, Nathan removed the old windows, wall paneling, and even some framing to make way so he could install a new sliding patio door. Here’s how he did it.
Difficulty: ⅗
Time: Several days
Cost: Around $1,500
Where to find it?
To remove the windows Nathan starts by scoring the paint around the window stops with a utility knife [homedepot.sjv....]. Then he uses a pry bar [homedepot.sjv....] and hammer [homedepot.sjv....] to pull off the window stops.
After removing the stops, remove the window sashes and the frame. Score along the paint line of the window trim with a utility knife. Use a pry bar and hammer to remove the window trim and the wall paneling under the window.
To remove the jamb, use a combination of prying tools and a reciprocating saw [homedepot.sjv....].
Self-adhesive flashing tape [homedepot.sjv....] provides an added layer of protection to the rough opening. Create a water-resistant seal by putting a layer of silicone sealant [homedepot.sjv....] along the edge of the flashing tape.
After fitting the door in place, support, and level the door with shims [homedepot.sjv....]. After checking that the door is level use screws [homedepot.sjv....] to secure it. Add flashing tape around the exterior border of the door with a ¼” overhang. Add Self-adhesive flashing tape to the exterior header.
If you have questions about your DIY door and window projects, speak with a The Home Depot associate through the Home Depot’s Millwork Virtual Apron program [homedepot.sjv....] for expert help and advice.
Products and Services provided by F.D. Sterritt Lumber Company [www.sterrittlu...] and MP Doors [mpdoors.com/].
Looking for more step by step guidance on how to complete projects around the house? Join This Old House Insider to stream over 1,000 episodes commercial-free: bit.ly/2GPiYbH
Materials:
2x6 lumber [homedepot.sjv....]
2x8 lumber [homedepot.sjv....]
1x6 lumber [homedepot.sjv....] (for balloon-framed homes)
Rubber membrane [homedepot.sjv.io/GmdOLn]
Silicone caulk [homedepot.sjv....]
New patio door [homedepot.sjv....]
Wood shims [homedepot.sjv....]
Wood screws [homedepot.sjv....]
Rubber flashing tape [homedepot.sjv....]
J-channel [homedepot.sjv....]
Tools:
Utility knife [homedepot.sjv....]
Hammer [homedepot.sjv....]
Pry bar [homedepot.sjv....]
Impact driver or drill [homedepot.sjv....]
Reciprocating saw [homedepot.sjv....]
Sledgehammer [homedepot.sjv....]
Caulking gun [homedepot.sjv....]
Level [homedepot.sjv....]
Oscillating multitool [homedepot.sjv....]
Plus, download our FREE app for full-episode streaming to your connected TV, phone or tablet: www.thisoldhou...
About Ask This Old House TV:
From the makers of This Old House, America’s first and most trusted home improvement show, Ask This Old House answers the steady stream of home improvement questions asked by viewers across the United States. Covering topics from landscaping to electrical to HVAC and plumbing to painting and more. Ask This Old House features the experts from This Old House, including general contractor Tom Silva, plumbing and heating expert Richard Trethewey, landscape contractor Jenn Nawada, master carpenter Norm Abram, and host Kevin O’Connor. ASK This Old House helps you protect and preserve your greatest investment-your home.
Follow This Old House:
Facebook: bit.ly/ThisOldH...
Twitter: bit.ly/ThisOldH...
Pinterest: bit.ly/ThisOldH...
Instagram: bit.ly/ThisOldH...
How to Turn a Window Into a Door | Ask This Old House
/ thisoldhouse
I can't believe how young Tom looks!
His name is Nathan.
😂
Hahha
@@Its_crazyadamlaare you sure
😂
Thought this was a video about Boeing from the title
I think that's the one titled "How to trip out a door. Hands Free!"
TOH is one of the all time best shows imo. Zero drama goes a looooong way with me
Wish they showed the trim and bringing the siding into the new area. Really valuable areas of waterproofing the sides and top skipped right over.
Pretty darn convenient that they have replacement windows.
As always, great job. Great opportunity to make that deck a bit bigger. Although, it is easy for me to say I didn't pay for it...
Door and deck fit nicely with the house. Nice job Nathan and mark.
WDYM?! Don't forget Stephanie's help! 8:05.
Then she saved the job with that screech alerting the Demons.14:14. Followed by the nearly impossible swinging of that massive Titanium lined bullet proof glass sliding dungeon door.
With the Biblically horrifying release of the minions to Destroy & Conquer the new territory. I now know what Paul saw and recorded in Revelations... The 4 horsemen are upon us. CHRIST HAS BEGUN BREAKING THE SEALS. REPENT! JESUS LOVES YOU.
Wow, what a project. So many lessons demonstrated. Thanks very much to the fine family who had the idea.
Nathan getting the big projects. Great work!
I have no idea how they can wear safety glasses and a dust mask at the same time without the glasses fogging up in about 10 seconds. I've tried every kind of anti fog glasses, all the sprays and wipes. Nothing works. I think its because anti fog coatings just dont like to stick to plastic. I've even tried swimming goggles and the moisture from my eyes fogs them up!
I replaced some windows by myself for the first-time last fall. I was absolutely blown away by how easy they come out or maybe I should say how little was holding them in. Now I want to do them all just for peace of mind!
it's forces beneath our consciousness that holds these window in place.
no wiring inside the wall underneath the window?
Surprised no temp supports when he cut that opening before the header was fully installed.
Caught me by surprise too
There were no headers originally, so removing the windows did not change any load bearing. The addition of the header was an upgrade.
With balloon type construction there are no need for headers
@@car45racing thank you for clarifying.
@@larryc8568 thank you for the info
That homeowner lady is gonna tell everyone at the cocktail party:"I picked up a hammer and help build this house" 😅
well, she did
Her working in the long dress..
Great job as always
I've never seen a house without a backdoor, very odd.
Maybe they turned a door into a window a different time.
Super old house and maybe didn't always have a nice back yard.
Excellent job. Turned out to be a beautiful job and a great addition to the house. 👏
Hi where are you’re location
I know it's a nit, but the video ignored how the new header was aligned with and joined to the stud ends above the window opening. Did they cut the original load-bearing stud at exactly the right place so that each of the old studs hit the top of the new header? Were the bottom of those studs screwed or nailed into the top of the new header?
I know these guys are professionals, but I've done enough work like this to wonder whether installing that header was really as easy as the video made it seem.
I am surprised at the big beautiful houses that Americans have. Here in canada we have shoe boxes with several families renting one shoe box.
I don't like PVC. The feel with wood and aluminium is better. The hole house is plastic. It will last for shure 😅
Amazing! First time seeing the PVC around the treated wood. ✌🏽❤️
only suggestion, cover everything in plastic or create boxed in separate working area
dust will be on furniture and all items
leaving any cleaning to be done by customer is -1 point, 9/10
What about doing the opposite? Turning a sliding glass door (or two of them) into smaller windows? I know it's a similar process, just would like to see it done.
Just play the video in reverse.
@@bryan__m😂
Men of culture, we meet again.
Beautiful job. The kids are adorable.
Everyone seems to always skip some of the details around the door waterproofing and/or trim work.
Are ❤❤❤❤dev
For fikr
Too bad they couldn't put in on the rear, the flow would have been even better.
What else do we need to do if the electrical socket is right under that window?
What was supporting the roof when there was no header installed?
If there was electical, how much harder would it be?
Why not a larger decl. Would have been perfect for that space.
What is carrying the point loads of the newly positioned Jack studs? Also, how was the header size calculated?
with a formula
Why wasn't there any back door to begin with? Weird.
i see alot of mistakes he made
Tom Silva he is not. Nothing against Nathan's skills, but he just lacks Tom's charisma.
Get up, c'mon get down with the thickness!!
Who covers cedar with vynil siding ahah
the sliders didn't have a screen?
Where is Thom?
My only gripe is why is she wearing a dress and working on the house? My wife and I remodeled a house in our 20’s during the pandemic and sold it. I taught her to run a saw, both circular and miter, nail gun, lay flooring, cut trim, set toilets, run water lines and HVAC and she loved every minute of it. But she wore pants and PPE. Otherwise great job guys. Love TOH. My philosophy is to teach her enough that if I were gone tomorrow she wouldn’t need me.
Wouldn’t her new husband just do it?
Yea I'm confused too
Were you on TV too? WDYM?!? She obviously helped at 8:05.
I think this lady wanted to make sure she looked A1 so she could brag about it later. Like when ppl come by, "We put that door in ourselves on this TV show." Then proceed to watch this YT video with them lol.
I doubt it was meant for efficiency and safety purposes like your wife was more concerned about. Are you 100% sure your wife wouldn't also get dolled up for the camera given the same circumstance? If not then good for you, she thinks logically and isn't worried about outside influences in the marriage lol.
@@afterstars😂😂😂
Great job, Nathan and family.
From a window to a door
he makes a better door than a window
NICE, REALLY NICE
Great work again
Great work, Nathan!
Did you check for lead on the existing paint?
Ok Karen
Only required for homes built after 1978. That house looked pretty new, so likely not required.
@@josephewing80 what year was this house built?
@@josephewing80 looks like before 1978, looks like planks were used instead of plywood for outside walls.
@@mcarroll598 stone foundation, plank under siding, balloon frame, is all pre 1950. (and so was that wallpaper)
I love how the contractor shows up, looks at the job, and gets right to work. No measuring, no checking for structural issues, no permits. This show makes it look like everything happens really quick.
I know side projects become frustrating for sure when you do them. A 3-4 day job here was wrapped up in 15 minutes. Then you go to do it, make mistakes, forget something from the hardware store, etc. It gets irritating when yours isn't as fast, lol.
Obviously there was a lot of prior planning and prep. Building permit had been issued and slider of course wasn't chosen and picked up on day of install let alone all the misc supplies Nathan wouldn't necessarily have off hand. Header size is typically determined by a structural engineer at time of building permit application and review... The install was quick but that happens because of his experience and proper planning. A lot of detail can't be shown due to video time constraints. Always good work from the TOH team. Great to see Nathan a part of the group, Mark, and Jen with sadly our long time TOH experts nearing retirement.
He did say it was going to take a couple days and asked if there was someone to take care of the kids.
I specifically noticed how there was no measuring and marking. That’s a time consuming part of any project. Not to mention shlepping and moving stuff. I was also cringing that they didn’t move that china cabinet to reduce risk and create space.
Exelente trabajo en familia! Gracias por compartir conocimientos😊
Why would they allow her to wear that outfit and no gloves?
"allow" her???
No checking for lead paint?
That's got to be a first. No knowledgeable explanations or advice from the craftsman. Not what I expected.
And for the low low price of $12,000 this too could be yours.
Not great camera work. Way too many times where I thought would be nice to see the work that's going on instead of the workers.
I dont own a dress like that, can I still do this project?
Jesus what a miserable homeowner. They got TOH to do their project, and it looks like he's getting teeth pulled the whole time.
it wasn't his idea