I Fixed My CR250 Engine For $2!
ฝัง
- เผยแพร่เมื่อ 2 ต.ค. 2024
- ★Pryme www.prymemx.com
★Video Sponsors
Rocky Mountain cjn.mx/rmatvmc
Wrench Rabbit www.wrenchrabb...
Nihilo Concepts bit.ly/2YsNU5c
Trick Engineering bit.ly/2M0bvce
Maxima Oils bit.ly/2JOCEfs
★CR250 Parts List www.prymemx.co...
★Tools I Used on CR250 www.prymemx.co...
★Supplies Used In Video
Tusk Crank Puller cjn.mx/crankpu...
Engine Stand cjn.mx/enginestand
Tusk Clutch Tool cjn.mx/clutchho...
Maxima Assembly Lube cjn.mx/assembly...
Maxima Grease cjn.mx/grease
Maxima MTL Oil cjn.mx/mtl
Loctite cjn.mx/blueloctite
1/2" Torque Wrench amzn.to/2kZlmPa
3/8" Torque Wrench amzn.to/2ILwhJB
ASV Y Handle amzn.to/2whEVKZ
Small Knife amzn.to/2EUWRgk
Rubber Gloves www.prymemx.co...
I fixed my CR250 engine for all of $2! Missing just a small washer can cause so many issues!
-Cameron
★Business/Social Media
Pryme www.prymemx.com
Instagram / cameronniemela
Facebook / cameron.niemela
★Camera Equipment
cjn.mx/camequip
★Ways to support the channel★
Bookmark the affiliate links below to make your purchases on Rocky Mountain or Amazon.
Rocky Mountain: cjn.mx/rmatvmc
Amazon: cjn.mx/amazon
★Music
Track Frakture - Hindsight
Link • [Chill Trap] Frakture ...
Track Russ - 'What They Want ' Type Beat
Link • Video
What did I do to the engine covers?
boyesen magnesium colour covers or scotch brite the oem ones, also a magnesium colour cerakote will look awesome, since you 've also other parts
Bronze cerakote
Cameron Niemela powder coat? Lol🤔
boyesen!!
Cameron Niemela QUIT TEASING US!!!!!
I'm glad you show the mistakes. Great series.
I think,...in a good way,...that you just MIGHT be showing the mistakes by doing them that way in the first place as an educational tactic,....
I Like It!!
Either way,...
All your videos are great and very enlighting even for longtime mechanically inclined people like myself, who are willing to keep learning.
Thanks Cameron,.. I appreciate this stuff...
Yes! Love the honesty here!
“The only time lubrication is bad is when you don’t have enough”-my dad (a certified mechanic not a pornstar)
I am so glad you misplaced that washer. I have been putting off throwing my 98 cr250 motor in for months now because i just couldnt figure out what was wrong. Just so happens it was having the same symptoms and now its only gonna cost $2 and a few days waiting to get it all back together. Really appreciate the Quality vids. Keep em coming brother!
Why u did not just check the parts diagram?
@@chriscs9080 I still haven't split the cases again to make sure. Just had the same symptoms he did. One day I'll crack it open again and fix it
@@chriscs9080 Cameron checked the diagram and even then didn't realize tahat there is a missing part, so probably its not so easy even with part diagram
Why not just put the washer in instead of throwing it in
Not only is this super entertaining it’s also cool to see how these engines work!
Damn fine job! I can’t imagine there are many bikes on this planet put together with so much love.
Upload more often your vids are Amazing!
I wish you could do this with all motors this is so in depth and so helpful for anyone rebuilding a cr-250
This is the best Service/repair video that I have seen on youtube. I am subscribed and glad that I found your channel.
what kind of geniuses are these people who design transmissions. same for the people who take them apart and put them together. kudos brother...
babur.karaoglu so true xD
It's not genius anyone can do it with a little patience.
@@nonya8694 yeap.. you can look at the diagrams and put everything together .
I always think about things like that when looking at stuff. Like rocket engines are so complicated but someone designed it.. I think it’s a series of improvements from a simple initial design over a long period of time and we’re looking at the finished product amazed how someone thought of it all. Engineering is amazing to me.
@@chriscs9080 I think of it like legos
Congratulations friend for the beautiful work on the bikes.
Got to say it, one of you best videos yet! I appreciate how clean your work area and equipment is in the video. So many times I’ll watch “ others” videos and everything’s a mess. Hate that. Nice work!
Just wanted to say thank you for making a good quality and detailed video! Helped a lot when I rebuilt mine. Appreciate you!
Most Excellent work.I believe that's the best engine assembly video I have ever seen.
Dude your the best dirt bike mechanic I've ever seen you keep it 100 your work is clean this is why you don't take your bike to a shop it won't be done as nice as this
Another banger 🤘🏻💨 can’t wait to see this thing finished. Loving the step by step videos thank you for all the hard work!!
This is definitely my favorite bit of the 250 rebuild series to date *:)*
i cant stop watching ur videos they are so well made and so entertaining i love you
This series of videos has been top notch. You move along at a good pace and explain it all perfectly.
Your videos of two-strokes are what made me decide to buy the 125 in my videos! I owe you a beer for that!
I am glad you included your mistakes in the videos showing that its all a learning process and showing how you discovered your mistakes
Love this series, has helped me get to The point to do it myself. Would love a similar series with a 4-stroke.
Hearing "assembly lube" every 30 sec in those vids drived me so nuts i ended up buying exactly the same for my CR125 rebuild lmao
This is exactly how commercial works :)))
Thank you so much for these videos. You do a great job explaining how everything works and fits together. This is going to help me alot when I`m starting my first motorcycle renovation.
Cam - I know you love to pull every last nut and bolt apart. But your'e making a rod for you own back. Example pull the clutch as an assembly - put a cable tie through every thing and put it aside until reassembly. The same goes for two gear shafts, the moment you split the cases - cable ties around bearing ends so the washers and gears cant drop off. Don't pull the gear shift detent apart - keep it as an assembly and so on.
That engine looks awesome!! Like it belongs to Factory Honda.
Yo bro, put locktite on the flywheel nut! They always have locktight on it from the factory! I know this because I run a 10oz flywheel weight on my 07 CR....Besides that perfect job!
good vid ! I like that you showed your screw ups.. Makes you real . Great detail for everything
30 minutes!? I wish I could watch it... I will come back later...
Actually i believe the notches on the friction plates are for using the clutch holde tool
Anyone else watch his videos on this build like 7 or 8 times and anyone else think that that crank is so shiny and pretty
This engine will run soo smooth love your videos
put a penny in between the clutch basket gear and crank output gear to hold it in place. Soft enough doesnt cause damage and you don't have to try to hold the entire basket in place.
THAT SPINS PRETTY BUTTERY SMOOTH🤪
Did I miss something or did you put the kick starter spring in a hole on the surface between the case and cover...maybe the hole in the case to the right? I think that hole in the case is for a pin to line up the cover...perhaps.
Try to shake for a few seconds your blue locktight before use. It looks very liquid on your video.
The same happened to me until I start shaking. You will notice it will be more thick and bluer, locking the nuts as it's suppose to.
Great video by the way. :)
Yes dude! This bike is going to turn out sick
Dude this bike is going to be sick after its finished!!
Have you heard about alternati g each clutch fibers notch? Ive heard it helps aggitate/ scoop more oil for the clutches. Hmm. Kind of like rolling a star on the ground. Point to point to point to point. Instead of, whomp, whomp, whomp, whomp. Lol.. I'm a little crazy....
Can’t wait till the next vid. Love ya videos man!
Man i love watching your videos even I'm past this stage of wondering what your doing... I just love your cleaning process everything looks brand new...i will clean most of my projects mainly the inside .. but damn you can really bring a bike back from the dead...i love it...keep them coming...I'm learning a lot...thanks
Awesome Cam!!!! great work......really helps
This is the first videoseries where i watched every video xD
And some of them twice
Doing a brill job Cameron 👍🏻
thanks so interesting cheers dude hope your heath improves
Super awesome as always
One thing I noticed that you did was wrong that shaft collar that you put in on the crank and it rides on the seal. I noticed it had a groove all the way around it.this ride on you crank seal. Rule of thumb is if you could feel it with your finger it needs to be replaced this is what blow s your crank seal and make your bike smoke really bad in your motor will not clean out. That shaft collar is a $44 part.
Hello!!! at the beginning of the video, you showed the package, I thought, what does the condom have to do with it? this is of course a joke !!! you well done hands grow from the right place !!! 👍👍👍👍👍
I love this half-hour video😁👌 It was really helpful!
he for sure love to put lube on everything 😂 but nice rebuild man helpful video for me
Awesome you have a new subscriber here! You explain things really good!
Very nice that engine is stunning!
WrenchRabbit does have anything for CBR F2 or F3. Crazy
awesome videos in depth keep them up great stuff
Awesome work dude, great vids.
Great work man !
So clean
I struggle with my gear. It's hard to change from 5 to 1. It kind stuck then I have to insist until it works.
I want to see the video of the Hot Rod crank grenading.
Watched again and those bloopers at the end are funny as sh&t!!
The end..... LMAO. Been there.
HAHA!!! We all have!
Cameron Niemela. How do you know so much about dirtbikes. When did you start working on motorcycles/dirt bikes???
I started wrenching at 12
Cameron Niemela I started a little younger. But most of my inspiration comes from these videos. They help a lot. Especially when I'm stuck on something
Can't wait to see the bike running
Super excellent video Cameron. What camera uses, your quality videos is super full hd
Thanks! I use a Canon 80D
Awesome work!!
keep making video bro!!!!! amazing work!
Rounded side doesn't always go up. Rounded side always goes to non-moving part.
Good Video, thanks for letting us see your mistake, so one less thing that can go wrong with my gearbox re-build!
the legend says it all, if you are soon enough, king Cameron will reply.
bybisbulkoi .....
you put so much assembly lube on everything you might as well switch out the oil with assembly lube😂
Last time when i assembled transmission i had constant doubt that something will be wrong, but at the end it turned up alright guess im an overthinker
THIS IS GOLD!
Brilliant vid mate I have a cr 250 98 but wouldn't even attempt this 😉
My 95 cr250 must be different the schematic shows 2 thrust washer on the outside of the spring on the kickstarter
what is the thing/part you hate most about assembling or dismantling a 2stroke engine?
brilliant.did u go 2 school for all this .im putting a 1981 xl250 together and i find that difficult lol
Dude are you self taught or did you train to become such a meticulous bike mechanic? I used to mess with engines about 20yrs ago and wish use have taken it further as a living!!! Your work looks second to none, would be very interested if you answered my first question!
P.s I cannot wait to see and hear this bike complete and running and of course you riding it around your mx track....talking about tracks how is your track coming along?? Loved the track build vidz also! Your living the (my) dream man! Keep them coming! Thanks....all the way from Wales UK👌🏼✊🏼💨💨💨
Thanks man! I am mostly self taught! Yeah can't wait to rip her around the track!!
Very informative, thanks!
Love these vids bro. Be never built anything but after watching this I’m gonna try!!!! Thanks man.
👍 Big thumbs up!
informational, instructive - great!
hahah the bloobers at the end x)
So I’m confused, when Cameron says thanks for Rocky Mountain or wrench rabbit for sending something over does it still mean he bought the parts or they gave them to him?
Thanks for the videos... I thought you looked threw each gear pcs when you 1st assembled it when you showed us.... Remember NOT TO RUSH...👍👍 smart idea to Part-Out the Jankie bikes and Flip the better ones....PROPS
START IT UP
Love the videos, Cameron! SOO GLAD you showed Rocky Mountain MC's blueprint-database. I am rebuilding the transmission on my 1993 KX250 and it's been invaluable. Greetings from Finland :D
you got so far on this engine, good job (:
Bro if something happened like this to my bike I would've never thought that it would be one washer
I’ve never worked on an engine and hardly any mechanics but I love watching these videos. Your step by steps and explanations are excellent. I’m learning so much about how my motorbike works. Thank you Cameron. You are a top man.
I've got a husqvarna fc 450 2017 .when I pull the clutch in it shuts up a chatter noise this is in neutral ..let the clutch back out and the chatter noise starts again ..I've been told it's the large gear on the back of the clutch basket and the small gear it meshes with. .got told it was like a gear backlash noise ..would you think it's that..I got told not to worry about it cause it's comon why don't other bikes doing it then. ???
I never take the shifter paws out of the side to aggravating
Cameron, totally awesome, very helpful and detailed, super-professional quality video, thanks for sharing :)
Actually so stoked to see how this turns out bro plus I have a cr 125 and this info we be sick when I want to give it a rebuild. Keep the content coming!
fantastic video,thanks.
Loved it especially the end! Thanks for letting us know your human! Keep it up!
Hello Cameron ! Ha voilà, verry nice gearbox ! Verry nice video ! Excellent week-end for you ! 😂 😉 !...
What part of the transmission was polished? And why not just get a new part?
Everything was polished inside the cases. See this video for more th-cam.com/video/yYIBOVtX-yU/w-d-xo.html
Banging out these videos. Good job on that engine. I bet you powder coated or cerakoted the covers.
I love the videos so informative of going through each step and pointing Out little things and mistakes keep it up.
Haha love the END of your video . I laughed so much