I would love a series where you teach us all the ins and outs of 2 strokes and how they are supposed to be put together and how they run and then also trouble shooting 2 strokes and figuring out what is causing diff problems bc I can never seem to figure out exactly whats wrong with my bikes and I have always wanted to be able to rebuild an entire 2 stroke without help from anyone else but need a mentor to learn from.. what do ya say up for it hahaha
My 91 cr 250 runs like dirt even after 2 new carbs so 3 including the original and 7 different jet settings lol but I have a 93 kx 250 that runs and idles like a dream with no adjusting and stick netting even after 30 years. I think the Hondas just hate idling the 91 is not my first steel frame cr and they don’t like to idle lol
I shouldn’t say dirt she runs sick and tears the dirt up but she just won’t idle like my kx. It never botherd me until I got the kx so I’m sure no one cares but after putting the effort in to get her set it’s frustrating lol
I had one that would scare the shit out of anyone who tried to ride it. Ported and built to the hilt. It would stand up in every gear and you didnt have to touch the clutch. Be running 60mph and just give it some more throttle and up it would come unless it decided to set the tire on fire.
I have an 04 Cr125 with low hours and it was just completely rebuilt , love the thing , great bikes and if only honda would come out with the CR line up again
The time and effort you put into these videos is greatly appreciated my man, the shots, editing and audio are great. Keep it up!! Greetings from Greece. Subscribed.
Nice vid, 100 hours on a YZ490 and 250 plus on the KX500 . Plugs on the 500's were never a problem but made a point to change the plug every 6 months. Always run my bikes at 40:1 synthetic. Five cents.
Great information. Choosing the proper air fuel ratio; can really save your 2-stroke engine; If too lean You will promote seizure, of the piston in the cylinder. On a 2-stroke proper mixture and proper spark plug heat range, spark plug heat range is critical, also.
I have learned with the pre mix, that the type of oil will give you what you need for the type of riding you are doing. My Rm 250 runs klots super techniplate on trails at 32:1 all day long with perfect jetting, if I run castor 927 it fouls plugs. Exact same conditions at wide open on the track gives me no issues with castor 927. Oil flashpoint was something I never thought of during 20 years of riding. I am not a believer in changing premix ratio's.
I love how easy you make all of this, i am mechanic as well but everytime i look up on your videos i learn something new that has been in front of my eyes all time like this spark plug video where you show up how the timing is checked, it's pretty simple how you read that much informations out of one spark plug, i only knew like how to read a few things from it but you showed me like 2-3 new things which are pretty amazing, keep up the good work, for me your channel and you are the best i found in about last 2 years im looking for dirtbikes and such videos. You are amazing, i love how you made easy that Honda CR engine, from painting to polishing parts till it's running, you are my idol!
Cam I appreciate you taking time to put out some killer videos. You break things down in a way that even a stoner like me can understand. With your help I’m done paying $50-$80/hour WC
“A tad bit lean makes more power” On 2 strokes, “a tad bit lean” also leads to 20 hour pistons, and 50 hour rod bearings. And hopefully not a worn out or scored cylinder wall. “If you’re fouling plugs, you definitely need to lean your mixture” Definitely not. You need to check your jetting first. Telling these young cats to just start leaning without background of jetting and how one adjustment affects another is gonna cause them to clap their engine out. Teach these kids better.
@@braaap5.7 hahhahahahahahahaha,and run some 115 octane to further lean it out hahhahahahahahahahahah, I know you are joking though just agreeing with your joking
My Daughter has been watching your vids and is learning a lot. She is 13 and has done well racing but she want to be able to maintain her on bike. Thanks for all the good info and if you have anymore WC stickers we would send back pics of her bike with them on it.
There is no leaner or richer when you are talking about the oil. The bike can be jetted to run on the ratio selected the difference would be what the bike is used for, high load=more oil, low load =less oil. 32:1 is a leaner burn than 40:1 this is because the oil displaces the gasoline and since two stroke oil is designed to resist burning and not aid or alter combustion the burn becomes leaner when more oil is added not richer. The oil is then pooled and pushed out in the pipe and on the spark plug because the bikes air fuel ratio is off and cannot use the oil for fuel. Don't try to fix a run ability issue with oil ratios. Choose a realistic oil ratio for your riding, stick to it and jet the bike to run correctly.
4,5% oil mix worked way better than 2,5% on my tdr 125 that was modded full power. It just consumes more of fuel/oil. I'll replace sparkplug soon and see if she runs better
I was running at 33:1 and found that plugs were fouling and bogging down a little then changed my ratio to 40:1 and didn't have the same problems, so by what your saying my bike was jetted for a 40:1 ratio and by me using less oil is not running a leaner fuel mixture, is that correct? sorry for my naivety i am just trying to learn
Aaron Vito make sure you let your bike warm up for a few minutes; and don't ride it super hard for a little whole, let the bike get all the engine parts nice & warmed up.most 2 strokes blubber & don't rev until they get warmed up
Have you ever done jetting by using the same chop throttle test run, but rather than reading the plug, read the size of the unburnt fuel wet spot on the piston at the transfers? A small wet spot about the size of a dime is about perfect. This would be for a higher compression ratio of around 15:1 or 16:1. I have never done this using pump gas so don't know if reading is the same.
Hi Cameron, Thank you so much for these very informative videos, they are very much appreciated. I would certainly like to watch an in-depth video on two stroke carburettor jetting principles. Rather like cause and effect, what happens if and what you can hear and feel when riding the bike. May be starting with float height and it's effect. Then covering from idle to 1/4 throttle, 1/4 to 1/2, 1/2 to 3/4 and 3/4 to 4/4. The effect of the pilot circuit, needle base diameter, throttle slide cut away, needle position, main jet. I have heard that VP fuels makes for an ideal constant from gas station quality fuel, so many be that is for another brilliant must watch video. All the very best from Robert :-)
I have Y125Z… the same method as I do here… it is totally perfect solution for discover setting our own bike needed.. especially main jet & pilot jet adjustment… great man.. Greeting 🇲🇾
Ist it running just right? Easy, take out your earplugs, put your head near the expansion chamber and if when you rev it up it makes the back of your throat itch, it's spot on.
Do a jetting video, but with sounds and behavior...every jetting vid on youtube just shows what jets basically do what and how to physically change them...which is useless unless you're really dumb. "If your bike sounds like this, it's caused by this..." and "change jet(s) to XYZ to correct ABC behavior" would be WAY more useful. I'm new to 2T so this would be a huge help. I'm like 1 day away from selling some toys and buying a lectron (which may be better for me anyway).
I already know you knew your bike was jetted spot on . Thank you for going thru the process of how it is done . You are right , I’ve jetted a lot my bikes too . Once it’s set you can feel the difference . Different altitudes change it too . 😁
Hey Cameron, your cr 250 is looking mint; Trying to convert mine from mikuni to keihin pwk , struggling to cure its bad jetting (low end ) tried swapping pilot jet etc, it’s at 55pilote , 172 main , second clip
This is an awesome video. Very informative. Glad to say I've learnt something new again. Every day! Thanks buddy you are a wealth of information when it comes to bikes.
Just got myself a yz 125 but i'm in a higher altitude and need rejetting an in dept tutorial would be ideal!! So yes make one pleaseee, great vid by the way:)
Just went to my local motorsports, picked up a new spark plug, and it looks on the more rich side. Thanks man, this worked on KX 250. Also want the WC stickers
@@Drift-fpv yeah just like doing a full engine rebuild, those are super cheap and easy too!!! fuck off man, going lean on your 2 stroke means less life, going too lean leads to half hour piston replacements
Cameron..I want to thank you for giving me the courage to take on forkseals on my cr 125..saved me money n gave me confidence..thx again..my son donovan lee cruz could use your help in restoring his kx 100..
Love this video- been a rider/mechanic for hundreds of years...this explains the spark read very well. Now I have to go look at my shitty bathed in oil plug and lean her out. :-)
WC Just bought my first bike 02 CR250, I have plenty of riding experience just none with the technical side of the bike. Really appreciate your videos, especially considering I mixed my first tank of gas too rich >
WC I miss you man I didn’t get to see some of your video but I’m hear to catch up and listen to the knowledge you got on these dirtbike have a good summer
Oh man, pleas do a jetting video. I'm so screwed, I don't even know when my 2 strok sound good or bad. And I don't have the patience.. just want to ride.
WC !!! LIVE FREE RIDE HARD!!! THANKS SO MUCH FOR THE VIDEOS MANY VERY IMPORTANT TIPS AND THINGS LEARNED OVER TIME FROM THEM AN LOOK FORWARD TO MORE IN THE FUTURE!!!
Well I tell you what I just found out I’m running a BR8ES Spark Plug and it’s a little cold for my liking, the 9EG seems from what I’ve heard to preform better overall and have a longer life if the carb checks out, shoot you run it in your 125 so I’ll run it in my 03 Cr125!! Thanks
you prefer a leaner jet setting? a bit dangerous I would say. you know 2 stroke engines are really prone to overheating and you will never know when is your unlucky day. I know it will make more power when it is a tad leaner, but does it worth it? maybe for you yes, but not for me. I seized my vespa before because of a lean setting and i will not make the same mistake again.
To be fair, a Vespa is made for riding around cities and getting coffee where as Honda designed the CR125 as a race bike (back when people still raced 125s) that can handle more abuse than that. I don't think that they are really as comparable as what you may think.....
Mtb Ridingog No, It is a fully upgraded engine that I used for a weekend track day and I sometimes I use it as a commuter. I understand CR engine is not a direct comparison with an air cooled engine, but better say than sorry. :) Sometimes you will never know what is going to happen on 2 stroke bike. for example, an old rubber intake will get cracked and it will make a lean engine even leaner and it will be too late before you notice the problem while riding. so it is better to get the setting right on the spot so that hopefully seized engine can be prevented.
Just watch 2 of your video..i learned alot about tunning..never really knew exactly what to do.. Just did a frame off on a 1997 yz 125 Doing a 1998 rm 125 now Then I'll start a 1997 kx 125 in a couple months And I got a bike like yours it has carb problems..now this weekend I can hopefully fix it now...or mine is a 2004 cr 25
Hey Cameron, my Ktm 125sx 2012 sounds like a 4 stroke while riding, its a 2 stroke tho, i mix it to 40:1 think its getting to much gas/oil mixture, sounds very heavy and the power kicks in super late, HELP??
Air filter clean or totally clogged? Reeds have a ton of time on them? FRESH fuel? Check this stuff out.of course, if your bike had a billion rides on it, the crank seals could be letting motor oil into the combustion area
When you started reving i thought i could smell the 2 stroke through the screen realising i got a spark plug in my hand, always great info Cameron thanks again✌
Ed Jacobson what fuel / oil ratio do you mix? Clean air filter? Reeds sit nice & flat on the reed block? Maybe take carburetor off & look at the # on the tiny little brass jets threaded into the bottom inside the float bowl- maybe previous owner installed different jets....? Just a couple of things to investigate
A Krosszfiúk Channel TH-cam csatornánk video sorozatban idén fogunk indítani műszaki rovatot, ahol ehhez hasonló kétüteműekről szóló tippek is lesznek, magyarul. Addig is szívesen segítek a TwoStrokeGarage facebook oldalamon, javíthatatlan 2t fanatikus vagyok. :D
This is the best explanation I've seen. This is really valuable stuff. I'll be doing this tomorrow on my LT 250r I'm trying to dial in. If you were on LBRY, I would be able to throw you some support!
Great Stuff Cameron. I'm currently working on a 1986 CR 250 build. It was stored outside in the CA sun. Plastics are horrible. cyclinder needs re-plating/or re-sleeve.
WC! Great video Cameron! Love watching these and I learn so much from them you give so much detail which no other TH-camr really does! Keep up the hard work!
I’ve drag races for years and tuned some serious nitrous cars which is mainly done buy reading plugs. Best way to read a plug is warm the bike up. Put a brand new plug in it and make a good pull thru the gears. Shut it off and cut the threads and read the plug. The strap indicates heat. Ice Always tuned like a light pencil mark around the white base of the plug. A hole saw works really good for cutting the threads to. 5/8 cut from the porcelain side
hey guy nice tip on the spark plug i will be sure to try that out i just got done rebuilding the top end on my kdx 200 i ran into a batch of fule that had water in it that was nota all friendly to any of my 2cycle motors so i do plan on running that lean rich test thanks you have made my life a little better and yes it wouldn't be a bad idea to see a jetting video good luck with your builds and its great to see you are doing well2 stroke people are tuff lol
On my Honda CR500 the idle adjuster is on the choke knob. How do I zero this out? Which way do I turn it and how many clicks do you recommend for easy start up and good idle? Do I adjust it while the knob is in the up or down position?
I have a 1989 CR125R , love this bike ,and your video taught me lots about ignition and fuel mixtures . I dont see many bikes of this year ,why is that ?
Great video, although i just have a question. On the insulator nose your one is black after 30 minutes of riding and on my bike it is white and has a bit or brown under the electrode. I have ran this spark plug for a good 10+ hours and its always been like that. What does this mean, its really bugging me i cant find anything online I would really appreciate a reply. Thanks
I feel like some of these tips are like hidden secrets of the mechanic industry. To be be honest I would prefer to pay a mechanic if they had a better turn out rate but most are backed up 3-4 weeks in my area. Thanks for the helpful tips.
Can also read your gas mixture from your exhaust! If there’s not enough oil in the mix there will be black liquid dripping down your muffler, that’s unburned fuel mixed with exhaust fumes, contrary to what you’d think cause it looks like oil, but a proper mixture will smoke a lot, but won’t drip
Would love to see the jetting video I have been Struggling to set my carb on my 1995 Honda cr125 i did a complete rebuild of this bike and it bogs at the end of each gear st full throttle love your videos you make wrenching look easy
Would you like to see a jetting video?
Stupid question . sure Yes.
Cameron Niemela yes sure
Cameron Niemela duhhh
YES for sure.
Cameron Niemela yes wc
When you pass the four stroke, it is running correctly.
Passed ktm 450 on cr500 uh yeah
No that's normal you can pass the 4 stroke on a shot piston ezz claps
Once you lap the 4 stroke it's running alright
Teemu yes but who’s piston will last longest with it pinned ?
@@mike-ws8yh If they are both are getting the proper A/F ratio, both will untill they run out of fuel.
I would love a series where you teach us all the ins and outs of 2 strokes and how they are supposed to be put together and how they run and then also trouble shooting 2 strokes and figuring out what is causing diff problems bc I can never seem to figure out exactly whats wrong with my bikes and I have always wanted to be able to rebuild an entire 2 stroke without help from anyone else but need a mentor to learn from.. what do ya say up for it hahaha
Im honestly so jealous of how well your bike runs
My 91 cr 250 runs like dirt even after 2 new carbs so 3 including the original and 7 different jet settings lol but I have a 93 kx 250 that runs and idles like a dream with no adjusting and stick netting even after 30 years. I think the Hondas just hate idling the 91 is not my first steel frame cr and they don’t like to idle lol
I shouldn’t say dirt she runs sick and tears the dirt up but she just won’t idle like my kx. It never botherd me until I got the kx so I’m sure no one cares but after putting the effort in to get her set it’s frustrating lol
I finally got a two-smoker after turning 50. I love my YZ! I learned alot on this video, looking forward to more of them.
I had one that would scare the shit out of anyone who tried to ride it. Ported and built to the hilt. It would stand up in every gear and you didnt have to touch the clutch. Be running 60mph and just give it some more throttle and up it would come unless it decided to set the tire on fire.
50 thumbs up dude !!
I have an 04 Cr125 with low hours and it was just completely rebuilt , love the thing , great bikes and if only honda would come out with the CR line up again
When you think you blew your 2stroke up but you put a new spark plug in and it starts right up
Lmao
Cherokee93 thats always a relief
My old ktm did that alot😂
Been there, done that. I nearly gave myself a heart attack because it happened the night before I was going to sell it.
NK Motor that means you ran it too lean
The time and effort you put into these videos is greatly appreciated my man, the shots, editing and audio are great. Keep it up!! Greetings from Greece. Subscribed.
Nice vid, 100 hours on a YZ490 and 250 plus on the KX500 . Plugs on the 500's were never a problem but made a point to change the plug every 6 months. Always run my bikes at 40:1 synthetic. Five cents.
And no gloves when you rode it. ? Are you mad ?
Great information. Choosing the proper air fuel ratio; can really save your 2-stroke engine; If too lean You will promote seizure, of the piston in the cylinder. On a 2-stroke proper mixture and proper spark plug heat range, spark plug heat range is critical, also.
I have learned with the pre mix, that the type of oil will give you what you need for the type of riding you are doing. My Rm 250 runs klots super techniplate on trails at 32:1 all day long with perfect jetting, if I run castor 927 it fouls plugs. Exact same conditions at wide open on the track gives me no issues with castor 927. Oil flashpoint was something I never thought of during 20 years of riding. I am not a believer in changing premix ratio's.
I love how easy you make all of this, i am mechanic as well but everytime i look up on your videos i learn something new that has been in front of my eyes all time like this spark plug video where you show up how the timing is checked, it's pretty simple how you read that much informations out of one spark plug, i only knew like how to read a few things from it but you showed me like 2-3 new things which are pretty amazing, keep up the good work, for me your channel and you are the best i found in about last 2 years im looking for dirtbikes and such videos. You are amazing, i love how you made easy that Honda CR engine, from painting to polishing parts till it's running, you are my idol!
I would much rather replace the spark plug and clean the pipe than do a rebuild
The exhaust pipe? Thanks
Dominik Z. Yes
You need to rebuild a twostroke, they lose compression over time.
@@CoachSludge same as a 4stroke
@Dennis in finland we do 2% mix on 50cc's
Cam I appreciate you taking time to put out some killer videos. You break things down in a way that even a stoner like me can understand. With your help I’m done paying $50-$80/hour
WC
“A tad bit lean makes more power”
On 2 strokes, “a tad bit lean” also leads to 20 hour pistons, and 50 hour rod bearings. And hopefully not a worn out or scored cylinder wall.
“If you’re fouling plugs, you definitely need to lean your mixture”
Definitely not. You need to check your jetting first. Telling these young cats to just start leaning without background of jetting and how one adjustment affects another is gonna cause them to clap their engine out.
Teach these kids better.
Neal Archer that's why no one will remember your name.Lol
Shut up noob
If I'm gonna be a "tad bit" anything, it's gonna be rich. Because that's the responsible way that grownups tune
Eh who cares just mix 32:1 and buy a lectron carb, simple problem solved
@@braaap5.7 hahhahahahahahahaha,and run some 115 octane to further lean it out hahhahahahahahahahahah, I know you are joking though just agreeing with your joking
Great video. You hear a lot of "gurus" talking about this but you actually showed it. Great job.
My Daughter has been watching your vids and is learning a lot. She is 13 and has done well racing but she want to be able to maintain her on bike. Thanks for all the good info and if you have anymore WC stickers we would send back pics of her bike with them on it.
There is no leaner or richer when you are talking about the oil. The bike can be jetted to run on the ratio selected the difference would be what the bike is used for, high load=more oil, low load =less oil. 32:1 is a leaner burn than 40:1 this is because the oil displaces the gasoline and since two stroke oil is designed to resist burning and not aid or alter combustion the burn becomes leaner when more oil is added not richer. The oil is then pooled and pushed out in the pipe and on the spark plug because the bikes air fuel ratio is off and cannot use the oil for fuel. Don't try to fix a run ability issue with oil ratios. Choose a realistic oil ratio for your riding, stick to it and jet the bike to run correctly.
@@aaronanderson7619 older 2 strokes 32:1 all day.
i usually just go for 50:1 oil mix on my dt125. doesnt seem to need more oil
4,5% oil mix worked way better than 2,5% on my tdr 125 that was modded full power. It just consumes more of fuel/oil. I'll replace sparkplug soon and see if she runs better
Not sure if I'm reading this correctly, but are you saying 32:1 is leaner than 40:1 so more oil is leaner?? I thought less oil is leaner
I was running at 33:1 and found that plugs were fouling and bogging down a little then changed my ratio to 40:1 and didn't have the same problems, so by what your saying my bike was jetted for a 40:1 ratio and by me using less oil is not running a leaner fuel mixture, is that correct? sorry for my naivety i am just trying to learn
I liked that you showed the plug chop. Easy to learn from. I read it in a book years ago and took me a bit to figure out where to cut it right.
Very helpful and appreciative! I’m new to the 2 stroke life and I’m learning a lot! Thank you
Aaron Vito make sure you let your bike warm up for a few minutes; and don't ride it super hard for a little whole, let the bike get all the engine parts nice & warmed up.most 2 strokes blubber & don't rev until they get warmed up
There’s definitely plenty of people out there(including myself) that could learn a lot from a jetting video!
Have you ever done jetting by using the same chop throttle test run, but rather than reading the plug, read the size of the unburnt fuel wet spot on the piston at the transfers? A small wet spot about the size of a dime is about perfect. This would be for a higher compression ratio of around 15:1 or 16:1. I have never done this using pump gas so don't know if reading is the same.
Hi Cameron, Thank you so much for these very informative videos, they are very much appreciated. I would certainly like to watch an in-depth video on two stroke carburettor jetting principles. Rather like cause and effect, what happens if and what you can hear and feel when riding the bike. May be starting with float height and it's effect. Then covering from idle to 1/4 throttle, 1/4 to 1/2, 1/2 to 3/4 and 3/4 to 4/4. The effect of the pilot circuit, needle base diameter, throttle slide cut away, needle position, main jet. I have heard that VP fuels makes for an ideal constant from gas station quality fuel, so many be that is for another brilliant must watch video. All the very best from Robert :-)
Cheers dude, just getting into 2 strokes and basics like this are just invaluable.
I have Y125Z… the same method as I do here… it is totally perfect solution for discover setting our own bike needed.. especially main jet & pilot jet adjustment… great man..
Greeting 🇲🇾
Ist it running just right? Easy, take out your earplugs, put your head near the expansion chamber and if when you rev it up it makes the back of your throat itch, it's spot on.
LMFAOOO
Please do a jetting video
HoldSilver yess
Do a jetting video, but with sounds and behavior...every jetting vid on youtube just shows what jets basically do what and how to physically change them...which is useless unless you're really dumb. "If your bike sounds like this, it's caused by this..." and "change jet(s) to XYZ to correct ABC behavior" would be WAY more useful. I'm new to 2T so this would be a huge help. I'm like 1 day away from selling some toys and buying a lectron (which may be better for me anyway).
th-cam.com/video/Uid8L4yMvfc/w-d-xo.html&lc=z23gxdahtvb3hdh4104t1aokgqlm5dwgegtbtbpmz5khbk0h00410
On a 2001 yz125 2 stroke please lol. I'm new and dont even know what jets to use. It's a troy lee designs bike. If that helps.
I learn so much from you, dude. Thanks for all you do!
Thanks man, this is so well explained, easy to understand, and I don't think that any video on YT covers spark plugs in this much detail. Great video.
I already know you knew your bike was jetted spot on . Thank you for going thru the process of how it is done . You are right , I’ve jetted a lot my bikes too . Once it’s set you can feel the difference . Different altitudes change it too . 😁
Hey Cameron, your cr 250 is looking mint;
Trying to convert mine from mikuni to keihin pwk , struggling to cure its bad jetting (low end ) tried swapping pilot jet etc, it’s at 55pilote , 172 main , second clip
This is an awesome video. Very informative. Glad to say I've learnt something new again. Every day! Thanks buddy you are a wealth of information when it comes to bikes.
Just got myself a yz 125 but i'm in a higher altitude and need rejetting an in dept tutorial would be ideal!! So yes make one pleaseee, great vid by the way:)
Just went to my local motorsports, picked up a new spark plug, and it looks on the more rich side. Thanks man, this worked on KX 250. Also want the WC stickers
I keep coming back to your vids for refreshers. The 2stroke jetting vid was excellent!!!
WC. Definitely do a 2 stroke jetting video!
I think it's better too keep it a tiny bit rich so you won't risk blowing it up.
No way lean as you can and change piston regular they are cheap anyway
@@Drift-fpv yeah just like doing a full engine rebuild, those are super cheap and easy too!!!
fuck off man, going lean on your 2 stroke means less life, going too lean leads to half hour piston replacements
Drunk Santa what
Cr500, 40:1 on the mixture, a tad fat on the jetting to keep it cool. Happy days.
Rich means more gas..just an fyi..
thank you for this educational video, getting back into riding after quite a few years and this really helped with the older bike i purchased
Cameron..I want to thank you for giving me the courage to take on forkseals on my cr 125..saved me money n gave me confidence..thx again..my son donovan lee cruz could use your help in restoring his kx 100..
Bestest dirtbike channel on YT
Wish I had your tutorials man when I had my 2003 125SX!! Very well explained and an exceptional amount of detail dude! Keep up the tutorials!
Love this video- been a rider/mechanic for hundreds of years...this explains the spark read very well. Now I have to go look at my shitty bathed in oil plug and lean her out. :-)
Best dirt bike youtuber!!!
WC Just bought my first bike 02 CR250, I have plenty of riding experience just none with the technical side of the bike. Really appreciate your videos, especially considering I mixed my first tank of gas too rich >
WC nothing better than the sound and smell of a two-stroke! I’m still waiting for you to make a video about that badass SuperJet!
Wow finally a useful 2 stroke video, this is underrated
Me with my derbi: *how to see if a 2 stroke is running"
My gilera blew up this morning
@@iiiqvexiii8209 damn
@@iiiqvexiii8209 Did you fix it already?
Are they so bad? just got one to fuck around
@@somescams no, just a meme to make fun of them. They are actually good, but most derbis are abused asf
I dont even have a 2 stroke but i watch videos like this 😆
Get one dude
@@cbr1thou i actually had! It was fun lol
Very useful info. I could read a spark plug to a exstent. But thanks for showing how to read ignition timing. Thanks motto
WC I miss you man I didn’t get to see some of your video but I’m hear to catch up and listen to the knowledge you got on these dirtbike have a good summer
Oh man, pleas do a jetting video. I'm so screwed, I don't even know when my 2 strok sound good or bad. And I don't have the patience.. just want to ride.
You bike is smoking a lot, clear indication there’s oil getting into your gas, you need to rebuild it
😉
Hahaha time to part it out!
Graham Vandermark haha, nice one
or too much oil
Graham Vandermark its a 2 stroke oil is going to be mixed with the gas
Yamaha Moto Vlogz Oh really? I had absolutely no idea 😒
WC !!!
LIVE FREE RIDE HARD!!!
THANKS SO MUCH FOR THE VIDEOS MANY VERY IMPORTANT TIPS AND THINGS LEARNED OVER TIME FROM THEM AN LOOK FORWARD TO MORE IN THE FUTURE!!!
WC i love the little things you do to keep your bike running mint.
Well I tell you what I just found out I’m running a BR8ES Spark Plug and it’s a little cold for my liking, the 9EG seems from what I’ve heard to preform better overall and have a longer life if the carb checks out, shoot you run it in your 125 so I’ll run it in my 03 Cr125!! Thanks
If your 2 smoke has smoke it's clapped and it's going to need a rebuild and billstine suspension
Quad ricers
Ok rice boy
It's just the oil mixed with gas
mag or lag and some cigrits
This m8e is dumb no smoke on a 2stroke means no mix which means top end seizing
you prefer a leaner jet setting? a bit dangerous I would say. you know 2 stroke engines are really prone to overheating and you will never know when is your unlucky day. I know it will make more power when it is a tad leaner, but does it worth it? maybe for you yes, but not for me. I seized my vespa before because of a lean setting and i will not make the same mistake again.
To be fair, a Vespa is made for riding around cities and getting coffee where as Honda designed the CR125 as a race bike (back when people still raced 125s) that can handle more abuse than that. I don't think that they are really as comparable as what you may think.....
Mohammad Farhan Sukarjo if you running good quality fluid it should be perfect v
Travis Stewart is he talking about a 50cc 2 stroke scooter ?
Mtb Ridingog No, It is a fully upgraded engine that I used for a weekend track day and I sometimes I use it as a commuter. I understand CR engine is not a direct comparison with an air cooled engine, but better say than sorry. :) Sometimes you will never know what is going to happen on 2 stroke bike. for example, an old rubber intake will get cracked and it will make a lean engine even leaner and it will be too late before you notice the problem while riding. so it is better to get the setting right on the spot so that hopefully seized engine can be prevented.
Cacki lol what brand is the scooter
WC!!! GREAT VIDEOS I LOVE THEM VERY HELPFULL IN THE LONG RUN .I HAVE A 2006 Yamaha ttr 125E 4stroke
Just watch 2 of your video..i learned alot about tunning..never really knew exactly what to do..
Just did a frame off on a 1997 yz 125
Doing a 1998 rm 125 now
Then I'll start a 1997 kx 125 in a couple months
And I got a bike like yours it has carb problems..now this weekend I can hopefully fix it now...or mine is a 2004 cr 25
Great video thanks for the help. Im trying to fine tune a 95 kdx 200 i restored. How much does temp outside affect carb tuning
Hey Cameron, my Ktm 125sx 2012 sounds like a 4 stroke while riding, its a 2 stroke tho, i mix it to 40:1 think its getting to much gas/oil mixture, sounds very heavy and the power kicks in super late, HELP??
Mika Siereveld -_- ur jetting running rich
Pian Mohd nope its running stock
Pian Mohd it was old feul sounds right now
@@mikasiereveld3124 smh...
Air filter clean or totally clogged? Reeds have a ton of time on them? FRESH fuel? Check this stuff out.of course, if your bike had a billion rides on it, the crank seals could be letting motor oil into the combustion area
You keep holding off the 250 build 😣😫
Walter Morgenroth because his cylinder was back ordered. So he can't get it together
Hard to work on it when parts are missing:)
Cameron Niemela yeah, I understand. I'm sure you're even more exited than we are 😅
Please make a how to jet video
When you started reving i thought i could smell the 2 stroke through the screen realising i got a spark plug in my hand, always great info Cameron thanks again✌
Hahaha thanks for watching!
Hello Cameron,
I have a 1997 Suzuki RM 250 that smokes like a stove pipe. It would plugs in five minutes, so I replaced the right crank case seal
Ed Jacobson what fuel / oil ratio do you mix? Clean air filter? Reeds sit nice & flat on the reed block? Maybe take carburetor off & look at the # on the tiny little brass jets threaded into the bottom inside the float bowl- maybe previous owner installed different jets....? Just a couple of things to investigate
Um so my top end is bubbling oil, I’m assuming I’m def gunna have to rebuild it
WC. I hope you start doing 4 stroke bike videos!!
Stay on 2 stroke vids :) specially on Cr
Hungarian language (caption) please :)
Sajt Kecske great country you live in man!.
A Krosszfiúk Channel TH-cam csatornánk video sorozatban idén fogunk indítani műszaki rovatot, ahol ehhez hasonló kétüteműekről szóló tippek is lesznek, magyarul. Addig is szívesen segítek a TwoStrokeGarage facebook oldalamon, javíthatatlan 2t fanatikus vagyok. :D
Thanks for the awesome video man, I learned more in your 11 minute video than I have in the past year on youtube!! Thanks bro!!
This is the best explanation I've seen. This is really valuable stuff. I'll be doing this tomorrow on my LT 250r I'm trying to dial in. If you were on LBRY, I would be able to throw you some support!
If a 2 stroke ain't smoking it's bad. If a 2 stroke is smoking then leave it.
Fortteen too much oil would make it smoke, its not a good thing , jetting could still be way off
John Davidson they've been running for years.
Too much premix oil = lean , less premix = rich 👍🏼
Fortteen they will still run for years with too much oil just not as well, will be down on power and foul plugs more frequently
John Davidson thats why my 1999 Kx 250 feels powerless , 32:1 premix on castrol 927 ... for years .
Funny this popped up and I was trying jet a fresh rebuilt 77 rm 125...
WC, Thanks for the tips, im getting my first two stroke tommorow i will sure need these tips!
WC! Great video man, I just bought a 2 stroke 125 today and your videos inspired to me to get a 2 stroke!
Great Stuff Cameron. I'm currently working on a 1986 CR 250 build. It was stored outside in the CA sun. Plastics are horrible. cyclinder needs re-plating/or re-sleeve.
WC! Great video Cameron! Love watching these and I learn so much from them you give so much detail which no other TH-camr really does! Keep up the hard work!
WC didn’t know much about how to tell if a two stroke ran good. This video helped a lot.
I’ve drag races for years and tuned some serious nitrous cars which is mainly done buy reading plugs. Best way to read a plug is warm the bike up. Put a brand new plug in it and make a good pull thru the gears. Shut it off and cut the threads and read the plug. The strap indicates heat. Ice Always tuned like a light pencil mark around the white base of the plug.
A hole saw works really good for cutting the threads to. 5/8 cut from the porcelain side
hey guy nice tip on the spark plug i will be sure to try that out i just got done rebuilding the top end on my kdx 200 i ran into a batch of fule that had water in it that was nota all friendly to any of my 2cycle motors so i do plan on running that lean rich test thanks you have made my life a little better and yes it wouldn't be a bad idea to see a jetting video good luck with your builds and its great to see you are doing well2 stroke people are tuff lol
Great video as always, man. I'd love to see you tune a 2t. I have had CRs all my life and jetting is tricky
Thank you for the video. Such a great teacher and visual examples we can check ourselves.
WC! Bought some hard to find suspension parts from them when I built my forks. Great company
WC! How clean your bike is allways amazes me
Yes, an in depth 2 stroke jetting video would be great!
On my Honda CR500 the idle adjuster is on the choke knob. How do I zero this out? Which way do I turn it and how many clicks do you recommend for easy start up and good idle? Do I adjust it while the knob is in the up or down position?
I have a 1989 CR125R , love this bike ,and your video taught me lots about ignition and fuel mixtures . I dont see many bikes of this year ,why is that ?
Awesome vid. Every time I watch your videos I learn something. Thanks
thanks for this video, my bike was running a little oily but now its running crisper than possible
Sweet clip, going to put a DEP pipe on my son's 65cc this will help. Perhaps I'll wait till you do the jetting video.
Thanks! Jetting video has been done th-cam.com/video/Uid8L4yMvfc/w-d-xo.html
Good info even for people that know how to jet bikes. I did the plug chop without cutting up plugs. That seems like it would get rather expensive.
Wc thanks for all the help your videos have been so much help on my 05 kx100 project
Great video, although i just have a question. On the insulator nose your one is black after 30 minutes of riding and on my bike it is white and has a bit or brown under the electrode. I have ran this spark plug for a good 10+ hours and its always been like that. What does this mean, its really bugging me i cant find anything online I would really appreciate a reply.
Thanks
I feel like some of these tips are like hidden secrets of the mechanic industry. To be be honest I would prefer to pay a mechanic if they had a better turn out rate but most are backed up 3-4 weeks in my area. Thanks for the helpful tips.
WC keep up the good work! I miss seeing the teardown videos.
WC!!! Started watching your 250 build and noticed from your other videos that we both live in Spokane. I'm hoping to see you at 7 mile some weekend!
''WC for works connections'' keep on keeping on thanks man a lot of useful info
Hey Cameron, great video please do a video on a workshop tour it would be great to see how your workplace looks in detail, cheers
Definitely yes to the jetting video
Can also read your gas mixture from your exhaust! If there’s not enough oil in the mix there will be black liquid dripping down your muffler, that’s unburned fuel mixed with exhaust fumes, contrary to what you’d think cause it looks like oil, but a proper mixture will smoke a lot, but won’t drip
Would love to see the jetting video I have been Struggling to set my carb on my 1995 Honda cr125 i did a complete rebuild of this bike and it bogs at the end of each gear st full throttle love your videos you make wrenching look easy
th-cam.com/video/Uid8L4yMvfc/w-d-xo.html