My AR-15 EXPLODED !!! (When Guns Go Boom - EP 6)
ฝัง
- เผยแพร่เมื่อ 15 พ.ย. 2022
- Install Raid for Free! IOS/ANDROID/PC: clcr.me/Nov22_KentuckyBcs and get a special starter pack! Available only for the next 30 days
In today’s video we see what happens when an AR-15 is pushed to failure! I hope you enjoy the video and thanks for watching!
Please support Kentucky Ballistics on Patreon! Please like and subscribe! Check out Kentucky Ballistics Clothing! Also like and follow Kentucky Ballistics on Facebook, Instagram and Twitter! See links below.
KENTUCKY KUSTOMS - / kentuckykustoms
INSTAGRAM - / kentuckyballistics
KB SHORTS - / @kentuckyballisticssho...
CLOTHING - kentuckyballistics.com/
CFMOTO - cfmotousa.com/
PATREON - / kentuckyballistics
FACEBOOK - / kentuckyballistics
TWITTER - / kyballistics
WARNING!
Kentucky Ballistics videos are filmed on a private shooting range in a controlled setting under the supervision of trained professionals. Kentucky Ballistics videos are for entertainment & educational purposes only. Do not attempt to recreate or mimic anything seen in Kentucky Ballistics videos. Kentucky Ballistics will not be held liable for any injury to yourself, others, or property resulting from attempting anything shown in Kentucky Ballistics videos. - บันเทิง
Install Raid for Free! IOS/ANDROID/PC: clcr.me/Nov22_KentuckyBcs and get a special starter pack! Available only for the next 30 days
Ok
Hi Scott
Please try 950 JDJ
hi also
AK 47
Mmmm yes, this does give me the Big Iron…
🤨📸
You should blow up an AK? Please
As long as it isn't an ak, lol
All the way up until he grenades an AK
Just you wait, Brandon.
The coolest shot in this whole video was the barrel hovering in mid-air after the table got smashed.
It was like Wile E. Coyote falling off a cliff! It just hovered there, completely disregarding gravity!
Had a cool wiggle to it also. Almost like it was swimming
Inertia is a property of matter.
I guess you could say... it's a free floating barrel....
I was watching the video and that shot played perfectly when I was reading this 😂
I love that he turned a bad accident into an amazing series.
That's how we need to take life, take something sad or bad and use it to make our lives more happy, can be jokes or a comic/book. I always do that, full dark jokes about my life and i don't give a sh*t anything haha.
It does take some serious balls to do that. I'm really happy he survived and made a full recovery. I heard about Scott from Brandon Herrera around the time that Scott had the accident. Scott's videos are so entertaining.
@@jackelrikuroso3945 99 Fry h😊😮😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😊pp⁰
It's pretty crazy that the lower receiver was able to stop the bolt carrier dead in it's tracks and redirect it forward with that catastrophic of a failure. You did damn good Mr Stoner!
The lower faired well. Of course the upper came apart around the bcg so there wasn’t much rearward momentum.
I have a story for you, Scott.
Several years ago I worked in a gunstore, I met a lot of interesting people and heard a lot of stories.
One day, one of our regulars comes in, all bandaged up, it looked pretty crazy. His story, however, was even more crazy.
He explained he and one of his buddies had been out shooting on a field, he was using his old Winchester model 70, chambered in .270win.
His buddy brought a rifle chambered in .308, by now you're probably catching on as to what happened that evening.
Somehow their ammo had gotten mixed up, and he grabs a round, puts it in his rifle and chambers it.
The .308 goes right into the chamber of his Winchester Model 70 which was chambered for .270.
He pulls the trigger and the rifle goes boom.
Barrel went flying down range, the scope slammed right into his forehead, the left side of the receiver went into his forearm and the rest of the rifle went everywhere else.
The man calmly explained how he really liked that rifle, and if at all possible, would love to buy another model 70 if we had one.
He was truly an interesting man, it's honestly people like him that made the hassle of retail work worth it.
Helleva Story! Thanks for sharing it
That is a crazy story. Though I think he left the part out where him and his buddy were not drinking water that night lol.
But did you have one
Now this is a useful story! Scott, maybe the next one in your series should be about loading the wrong caliber into a rifle. Either the example above or maybe more common 300 Blackout in a 5.56.
@@hirschmeistr6842 I think we had one actually, not sure if we had one in the same caliber though.
This was like 5 years ago.
The explosion gets me every time even though I'm expecting half the time
scammer ^
We're pretty much at that point where we're expecting it to happen so can't blame you for that really.
Yeah
I was expecting it when he was pushing the charging handle the rest of the way forward.
@@alaminabdullah7770 i reported him
Love that at 7:05 the BCG is just like, "Woops gotta pick up the next round!"
If you do same it will explode for sure so don't do that
The water sprayer killed me 🤣🤣🤣
dude every one of these videos makes me have to give you mad props man. i mean you took a neardeath experience and turned it into a series..
my favorite part of the video is the facial expression on the thumb nail
What would you like to see tested next? I hope you enjoyed the video and thanks for watching!
hello
@@JetGuyAlt you’re first
Do a Glock please. 10mm or go home
Do 950 JDJ “Fat Mac” a gun with 4x the muzzle velocity of a 50 BMG.
@@tylersticker yay
Rather than just using the safety, perhaps it would be even safer to insert the hot load as the 2nd round in the mag, so even if it "just goes off" when you take the safety off, only a normal round would fire. Only problem is you'd have to set up your string to work multiple times in a row. Just a thought
The barrel had a bullet lodged in it, a squib. So the gun would've exploded after the first round fired either way.
God the relief when I saw the intro thought I was about to see the Kentucky thumb back in action 👍
The table throwing will never get old.
Love you Scott!
We need a Scott and jujimufu collab. Table throwing contest.
@@johnmcafeedidntkillhimself th-cam.com/users/clipUgkxgN7KiwFyxLMbiQK8L01eD2PP4GWSUgoW
Love how he is just owning the fact that, he almost died to catastrophic failure from a gun, and kinda made it his thing now to do it on purpose, in a somewhat safe environment.
Same
This also happens when a 300blk is fed into a 5.56. Yes it will chamber as it forces the bullet into the case upon chambering. Be extra careful not to mix your ammo.
Had that happen twice on our range!
@@Scottkb722 A sucker's born every day, I guess. BTW... what did he win? I'm never so lucky☹️
@@jstriker623 Oh come on, you could just go msg them yourself to find out what you've won if you really wanted to know...
It’s kinda hard to mix up .223, green tips, and .300
When All three look different.
@@Melanie16040mark your mags with tape or something
Sooooo glad the good, good folks @ Vanderbilt were able to ' Six Million Dollar Man ' , You back together--- YOU Sir came back to keep dominating ALL the firearms channels.
This series has highlighted that it is not just the chamber pressure alone that determines the _severity_ of an overpressure event - it's also the total energy of that overpressure event; The comparatively dinky 5.56 still did substantial damage to the weapon and surroundings even though the test subject fared quite reasonably. Similar was true of the pistol detonations. By comparison, .50 BMG is packing _significant_ energy, as Scott knows first-hand.
Well his thumb at least anyway.
He knows first thumb! I kinda wish these guys would stop giving politicians ammunition (dumb pun intended) to take away our 2nd amendment rights. But I also understand it's educational in a way about safety. I love Scott and his other friends channels but those politicians are tards and know nothing about firearms even though they are surrounded by private security with them. Stop electing the stupid ones!
Bob and the spray bottle 😂
I would absolutely buy my firearms from Bob's Big Boomsticks!
Great video, as always!
if they ever help a gun store sell inventory again maybe Bob should step up =D
Way late but that’s the first time I’ve seen the forward assist actually utilized. I guess hot rounds need a little extra help. I absolutely love how this is Scott’s new mission.
Same here. I’m guessing it was because he followed the bolt back with the charging handle kinda gently instead of dropping it.
Nobody has more respect for guns that are about to blow up than Kentucky Balistics. mad respect and glad you are still with us Scott after the first major gun go boom incident
I know grant given it's a hot round versus a squib load, but still knowing what would happen when using a rifle that has a catastrophic failure is important for me. As a Marine, I learned firearm safety not in just handling but remedial actions, which includes knowing when there's a squib load. That being said, it's kinda unavoidable if you happen to have that one hot round. Thank you for posting this one!
My Cabbages! Every time, I see Scott demolish cabbages I hear the cry from Avater the last air bender.
Also, really cool to see, how a catastrophic failure on an ar15 looks. That barrel looked really messed up.
Thank you Scott, for being entertaining and informative at the same time.
Greetings from Germany.
I still go back and watch that series sometimes, probably one of my favorite animated shows ever.
Why, that's how you make Kentucky Coleslaw
10:23 I like how the barrel levitated for a few seconds lmao
Bob's Big Boomsticks I love it! And then he asked "you're gonna blow it up aren't ya?"
Anyone else get the feeling that this guy is keeping the folding table industry in operation single handedly.
This series is amazing. Every episode has been top notch. Thank you so much for putting in the time, effort and money to do this. Lots of us appreciate it tremendously 👍
6:45
*My entire argument when somebody uses 🤓*
I was so relieved when Scott took off the Vortex AMG optic before blowing up the rifle. haha
Yeah I was in suspense
I didn't want to vortex to get wasted
Been watching Scott for a while, and seeing him go from more serious, to more goofy and having fun with himself, has been great to see
Love the pseudonym you came up with. I think the "text me to claim your prize" thing is total scam bait. I don't think Scott is person promoting it.
Actually had one of these last year. Totally my fault. After reloading thousands of round over the years, I made the mistake of dumping my powder thrower into the wrong bottle. Yes, I added pistol powder to my rifle bottle. Thank God only the upper & bolt assembly were trashed. By design, I’ve only have one powder out at a time, but obviously screwed up here. Hopefully, my mistake will help others to avoid a similar fate.
@@harrypalmer291 th-cam.com/users/clipUgkxgN7KiwFyxLMbiQK8L01eD2PP4GWSUgoW
He always has "fun with himself" 😂 🫡
He has a great amount of jokes per minute ratio. All of em good ones too. "Continue our war...on DIABETUS" lol
Bob finally busted out the spray bottle 😂😂😂
Im curious to know now, just what an after market optic would look like after such an event
Or if the mag was fully loaded
i’m pretty curious abt how powerful that bullet would be out of something that could handle the pressure……….
The more this guy does the more I like his content. Keep smashing and acting goofy Scott. You the man!
You make me proud to be from Kentucky, keep up the fun and educational videos!
He makes me proud that my passport says United States despite having squinty eyes!
Go Big Blue
Though Scott is likely a Hilltopper.
@@johnd5740 But Scot doesn't have squinty eyes.
AK 🙄
One of my sons, Ethan, had his M4 blow up when he was in Korea during the missile crisis. Luckily he was relatively uninjured and photos of his blown up rifle are now used in the training manuals
I think that a bulpup explosion test would be interesting, considering the chamber is much much closer to the face i am curious to see how a tavor, mdrx, AUG,(do we really need to test a keltec) would hold up to failure.
i hope that one of those is in the works, havent seen a bulpup catastrophically fail
he should use one of those Cali complaint MDRs as no one will shed a tear over Cali complaint gun going boom.
@@phalanx3803 LISTEN HERE FELLOW TH-camR. The cali compliant is the only way i could own an mdrx in NY. yes i am trying to move LMAO
@@darkninja225 you're lucky I live in Australia. Only time I get to shoot guns like that is when there's a special event on.
@@phalanx3803 i am so sorry to hear that. il run a mag in your name
Agreed. The concept of a full length barrel in a compact gun is absolutely fantastic. I have always wanted a 12 gauge bullpup. But something about a magnum three and a half inch shell going off right next to my throat never really seemed like a good idea
8:40 when the peice fell out Scott's face was priceless 😭
What I like the most about this series is when you go gradualy up to se at what point the gun fails. Slightly hotter round each time. Can't remember if you blew up a leveraction yet, if not it's time!
There is no casual increments involved here.
Even in a .223 barrel alot of loads top out at 100% case capacity so if we assume 100% case capacity is max 55k pressure in order to create a 550k psi round you would have to literally compress the powder into a solid and fit 5-10 times more powder than 100% case capacity. Actually I take that back, I don't even think it's possible with the fastest rifle powders meant for .223 and ya he even said it's a squib so I'd bet that round wasn't even capable of blowing up the gun without the obstruction.
cia should have dropped a bunch of these rounds around afghanistan for the taliban to find on evacuation day
@@whatsmolly5741 Pistol powder or shotgun powder would do it. How much? I have no idea.
I've seen a couple of catastrophic failures with the AR, the inherent design directs the great majority of the blast into the BCG and down the magwell. Pretty much destroys the small parts leaving the lower repairable. In the two incidents I witnessed, no harm to the shooter, no forearm damage, no hand damage, nothing came back into the face. These were normal rounds, failure was determined to be a headspace issue. Those were pretty small blasts compared to your "test".😂
A couple? I spent a decade in the Army around ARs and never saw one blow up. Was it hot loads or cheap rifles?
Headspace is set even when changing barrels
i laughed so hard at the dealer character, absolutely funny.
Scott me and a buddy grouse hunted here in my area. I used a 20 gauge Benelli auto as did he. We purchased them at the same time. He later got a 12 gauge pump to take pheasant hunting up north. We always wore hunting vest with cartridge holders and hunter orange so as to see each other in the thickets, rhododendrons and timber grouse love, (when there were grouse in my area 20 years ago). Anyway he cleaned out his vest, reloaded with 12 gauge and off to shoot clay through from the timber while throughing down a clear cut he went. With another guy. I was not there. He loaded and went through a couple of shells while sliding another into the magazine as the operator of the thrower reloaded. Pulled trigger to nothing!? Thinking he short stroked the action, (which can happen with a pump)he pumped another into the chamber. At the pull of the trigger the shotgun exploded in his face. When he showed the pump to me it looked like a peeled banana. Cutting him up. What had happened was when he snapped the trigger to no shot, he had left a 20 gauge shell in his vest pocket. It went into the chamber far enough to allow the next 12gauge round to chamber and fire on top of the 20gauge shell!
Lucky he didn't lose his sight, face, hand or arm. The Lord was watching over him that day. It was as if the explosion broke apart things all around his body parts. Maybe you could try this scenario. Not sure but he shot a lot of low brass Winchester AA for clay and Winchester Double X high brass in the 20 gauge hunting. The pump would take 3" or 3½ shells as I remember him making the statement. Again, I was not there, but I have never known Charles to lie to me either. It would make a cool video in my humble opinion.
Hey Scott, With that much force going downward, I imagine it would set off any rounds if they were loaded in the mag. That would be interesting to experiment with if you wanted to retry this again! Thanks for being safe and have a great day!
dang it, had the same thought and missed your comment. Agreed!
It did when it happened to me.
I’ve never seen it explode the rounds below it. They generally get scattered all over the place, but never go off. I’ve seen this in real world a few dozen times. I would guess 30-35 times to be more specific.
Would also love to see you get some ballistic fore arms for this idea too would help illustrate the extent of damage that could possibly happen
Great idea 👍
Would love to see these tests without a squib. An over pressure failure would be much more likely than both. But I know you kinda only get one go at blowing it up and you want a proper boom. Thanks again Scott
Some of the guns that were overbuilt to high extent might even survive any possible overpressure rounds you can make using any smokeless powder-based stuff but I would love to see it anyway!
I used to have an old Forehand&Wadsworth D/A #32 revolver in .32 rimfire and believe it or not but I ended up increasing the load all the way to maximum pressure possible in it's caliber by filling it's whole case capacity with the PETN-laced super-fine and really fast burning smokeless powder and the gun survived even that!So the barrel was just 2.5" and the bullet weight was 100 grains;the bore diameter .316" and case length .800" so basically the round was dimensionally identical to .32 S&W long and the muzzle velocity reached a whopping 2130 fps!So the damn .32 snub nose revolver ended up producing over 1000 fpe which is by the way exactly the same energy as the full sized (18" barrel) AK-74 rifle with ball ammo in 5,45×39mm! Just imagine the recoil by the way: the little sucker kicked like a good .44 magnum should feel!
@@johnsheppard1476 32 rimfire is cool!
Frankly, yes the forearms were missing, but the overall destruction was pretty safe all things considered.
Scott's local produce dealer won't have to worry about going under.
I don't know what I loved more, the intro or the bad jokes. Either way I friggin' loved it
I lost it when Bob started spraying you with water "No means no!" 🤣
The keltec RDB is probably relatively safe if an similar round was chambered and fired out of it. Since it had a downward ejection and the magazine well to direct the blast. Of course the magazine would still be destroyed along with the bolt and piston.
4:01 that pull thing is so satisfying!!!
I love how you swapped the guns!!!! Anyone else notice that it changed to a Ruger 556 instead of the one he was shooting which was a Palmetto state armory
I do now ,thanks
I don't know enough abouts guns yet so I didn't till u mentioned it. I just purchased my first fire arm a couple months ago so I'm still learning
@@solinoctis804 scott also mentioned it in the video 😂 3:15 and 4:54
I did but that's because I'm a Ruger fan
@@youtubeuser206 He did indeed! it was not by trick he did specifically call it out! I just found it amusing that no one else in the comments had noticed lol ;-)
The barrel hovering in mid air was excellent. That rifle actually had a true free floating barrel if only for a brief moment post rifle destruction/table collapse. Pretty cool 😎.
"if your gonna be dumb you gotta be tough"
True, but he’s not dumb
6:20 ah the good old Forward Assist doing its job
See this would never have happened to an AK, I hear Brandon’s AK50 can take slap rounds all day 😂, love the series dude keep them up
AK: Slavic.
AR-15 vs cabbage: Slawvic.
Blind Ryder 609 Ooooo. AK dust cover and bolt up in the face. Seen that on video before when an AK blew up. Most ARs that I have seen blow up on video usually blow out through the ejection port and down through the mag well but not in the shooter's face.
My theory is that the destruction occurred primarily downward and laterally due to the bolt being locked into the receiver extension and the squib not allowing gas to get to the gas tube to unlock it. This setup needs to be done twice more. Once with a clear bore, to see if the gas system would prevent some of the damage and once with the lugs shaved off the bolt.
Donate two more ARs and I'm sure he'll be happy to do that for you. :)
500,000 psi is way too much pressure. The bolt would likely not have unlocked before the whole gun exploded anyways, like seen. The pressure is way too high, and way too fast. The powder being used for these loads is waaaay faster than a normal rifle powder, so the pressure builds up incredibly fast. It would explode before the bullet has even moved down the barrel much.
@@KimballPrecisionRifles I’m not saying it will survive. It would just be interesting to see what difference it might make in the blast patterns. I would especially like to see what would happen if it sheared the lugs off a weak bolt .
the water sprayer... had me laughing
That intro lmao. I want to see a large revolver of some kind have a catastrophic failure in a future video, maybe a .44 magnum or larger.
10:23 that last slo mo was awesome 10 out of 10
my favorite part of the video is the facial expression on the thumb nail
Scott, the intros to your videos keep getting better and better. Thank you for the laughs my guy 🤘💀
FACTS they are great
Watching these guns explode brings back a very scary memory in my childhood. Very informative! It happened to my dad when I was around five, I’ll never forget that image.
I wonder if you would be willing to re-create the same event that happened to my dad? Without my dad of course! Hahahaah! He owned (2) 410 shotguns. One in 2.5” chamber, and one in 3”. In a rush accidentally loaded 3” shell into 2.5 chamber. NOT GOOD! Curious if results are similar or even the same.
I’d be curious to see incremental increases in powder charges (for reloading) to see how much you’d have to over load it before bad things happen with different calibers.
I would like to see that as well!
@@robertjesse1022 I think everybody would
Me too
A seriously good idea, Saami specs Saturday?
The quality of your content has gotten so impressive over the last couple years!
The skits at the beginning always make me laugh 😂
That AR froze in mid air 😂. Pukka slow-mo
This man never seems to not put a smile on my face
Double negative. The correct way to say this is “this man always puts a smile on my face”. Which is a little bit 🏳️🌈 but to each their own I guess
He's a genuine nice guy
Thought he was gonna do it at 6:28 but totally caught me off guard at 6:33 I love it😂😂
🔝🔝🔝congratulations you have been selected among our shortlisted winners 🎊 CHAT 🔝🔝🔝 Above for something special 🎁💯
You know the explosion is coming but it's still funny every time
The squirt bottle bit was hilarious 😂
"And This Is How You Get Ants!"
I love how Scott puts on safety glasses and then proceeds to hide behind a massive truck lol
Ya know when I was a teenager doing wood working with no safety glasses this old grizzled carpenter came up and sat down next to me. He looked at my work and asked if I was deaf blind and stupid. I said no why? He said I don’t care if you don’t wear hearing protection or gloves but if it was me I’d wear safety glasses. I asked him why and without missing a beat he said I don’t need every finger on my hands or either ear to work but I’ll be damned if I can’t see boobies. They guys probably long dead by now but his wisdom lives on.
He's smart and cautious and I would take the same precautions, especially since a rifle blew up on him and almost sent him to the shooting range in the sky.
@@jumwum6505 wise man
Well He's learning once bit twice shy LOL
@@jumwum6505 barely related but an old man pick pocketed me in line and then tapped on my shoulder and asked if this was my wallet. I was like wow thanks, didnt notice I dropped it. He then said "You didn't. And thats why you don't keep your wallet in your back pocket" and disappeared into the crowd. Will never forget that lol. Been in my front pockets ever since
Scott I think you should get another AR and get a bunch of rounds that gradually increase in pressure until damage happens. That would be awesome to see.
Hey Scott, great videos! Maybe you could load up a lever action with Pointed bullets just to see what happens? Maybe use those Extra Spicy rounds to set off the chain reaction if standard loads don't work.
I died when the water bottle came out.
This man goes though more tables than the WWE does. Love this channel.
th-cam.com/users/clipUgkxgN7KiwFyxLMbiQK8L01eD2PP4GWSUgoW
I love how Scott made a disaster into a masterpiece.
That is the funniest opening of all time. Discourage yourself with a spray bottle 🤣 plus tons of puns 👍
Just when I thought you couldn't be anymore awesome, you go and totally redeem yourself 🤣
seeing that the weatherby mark v is considred the strongest bolt action receiver in the world it would be cool to see a destrucive test on that, great video scott, keep it up.
Well, even if it’s the strongest action ever with a malfunction like a bore obstruction the barrel is just gonna explode
You’d have to get someone who reloads ammo to make a highly overpowered round, and maybe a barrel obstruction too.
Ак -74 самый прочный
@@alphagt62 that’s what he does for all of these videos. The rounds are like 10x higher than what the max pressure load is lmao they would explode without a squib
What Scott is trying to say here, just cause you almost pass away from one item doesn't mean you have to switch up your hobbies. Scott almost passed from a 50 cal explosion but he's still Here and he's still having fun shooting his guns
I think it's more like a revenge on the gun kind :P
"NO" with the double peck flex, might be the most awesome thing ever.
For the pineapple you could say “ That was pine-tastic”
Why does watching Scott throw things never get old?
Yeeting tables is fun.
And the hand sounds never get old 😆
This channel is like professional wrestling for gun enthusiasts.
Kinda like a Gallagher thing.
Slapstick comedy is timeless.
I seem to recall Stoner talking about the downward-directed blast upon failure as a designed feature.
Would a full clip make any difference? The only thing that I remember about the original m16. Was when the range officer told us to always make sure that the charging handle was pushed come forward. Or you risk the chance of really being able to talk out of both side your mouth.
@@CSltz mag/magazine or standard capacity ammunition feeding device
Not 'clip' it's not a garand or sks
@@matthewbeaver5026 stop being cringe its not a big deal
@@kujokage4611 cringe would be using improper terminology and not being self aware enough to know it or admit it..
@@kujokage4611 Incorrect terminology is partially how politicians are trying to take our rights away. Is this instance a big deal? Not necessarily. But making a habit of it is.
The humor just keeps getting better. Skeleton hands had me rolling
Hey Scott. Love the videos.
I watched the AR15 destruction video and curious what they put in that load that busted it.
I’m a reloader and was curious about bullet weight, powder type etc.
The Squibb probably didn’t help….
Keep them coming!!!
I'd like to see him re do the series , with incrementally increased loads, with no squibs or outside effect... Just the over charge and. Pressure estimation
Scott: You never fail to make me laugh! Thanks for all the time and work you spend. Dean
This series is amazing! Maybe do a lever action next🤔?
What I was thinking too. Catastrophic lever gun failure would be interesting to see.
Yes
Agree, 45-70 maybe
It would be interesting to see how something like a Rossi would handle it
I am impressed you managed to get that much pressure, .223 loads take up the majority of the case volume so they are difficult to overcharge. I am guessing you used a fast burning pistol powder and the heaviest possible bullet?
how did i go this long without discovering this channel??? love your collabs with Matt. subbed. great intro 🤣🤣
I know right? I love this guy.
I think it would be cool to see an episode of this series focusing on super hot, overpowered small caliber rounds like 22lr, 22 mag, 25 acp, 5.7x28, etc… I wonder if you could make those small rounds high-pressured enough to edit anything
I can tell ya what not to do when reloading and you get a Hot Round, don't throw it into the melted lead. My dad's friend did this when they were reloading, years before I was born (sometime before 1969), and when he threw that round into the melted lead crucible everyone scattered to a safe distance before it exploded. The crucible had a fair sized hole in it and lead was scattered everywhere. Morals to this story, don't reload while drinking, and if you make a mistake don't throw it into the hot lead crucible. From the guns/rifles we had when I grew up the round was either a .22 LR or a .30 Cal. So a doubled powdered round (at least) round could be quite spectacular, even with only a .22 LR.
I'm also gonna throw my hat in the ring for a 10/22. When I was a kid and didnt know much about guns I took my cheap-o savage bolt action .22 rifle and two 22lr rounds. I pulled the bullets out of both and dumped all the powder into one case and pressed the bullet back in. Stupid me thought twice the powder = twice the velocity. The gun failed somewhat catastrophically. Cracked the bolt and spewed a few parts out the ejection port. I was fine thankfully.
@@motosk8er2 haha yeah, thankfully you’re okay. 10/22 is a fine rifle. I have 2 of them and never had any issues
When I was young, I sometimes would pull the lead off a .22 bullet, because you could easily do this with just your fingers, and then put the powder from one into another to double it and put the bullet back in. I fired a couple of these in an old single-shot bolt-action .22 rifle and they made quite a bang, but they didn't do any noticeable damage. It did vent some gas out the breach face and jar the bolt handle up some, and but not all the way open. I never did this with anything stronger because I realized that would be pretty stupid. :)
5.7x28 would be interesting. That's already a speedy pistol round. I wouldn't want to blow up my 57 though, it's a fun pistol.
From pine boards to zombie parts. Well done Scott, well done.
🔝🔝🔝congratulations you have been selected among our shortlisted winners 🎊 CHAT 🔝🔝🔝 Above for something special 🎁💯
Military Fun fact, Back in Nam…lol. We messed with VC ammo switching out the 7.62x39 gunpowder for TNT and RDX explosives to cause such effects on VC troop weapons….so much ouch lol
PS. If I have to offer a suggestion for what be next I’d say step away from the norm. I’d say either a Double barrel shotgun or honestly a semi auto handgun as I recently watched a movie and a guy in it died as his Beretta 92F blew up and embedded the slide in his forehead and I play Hunt showdown with my brothers and came a cross a map Corpse with an exploded double barrel shotgun around him. The barrels were embedded into his bowels….poor guy….I’m just gonna leave that like it is. Lol
Why are Kentucky and Demo very similar with the goofy stuff 😂 love these guys
Scott, do you keep the firearm pieces from these experiments? It would be funny to give them to Brandon and see if he can make a Franken-gun out of what is left.
Scott, I often compliment, and always like, you're videos because I think they're really good. I've been around since before 1m subs and this one was truly exceptional. Your talking was like a well written script, especially with a great series of puns. You're table work seemed especially on point, as well as your shooting seemed a little smoother and faster... can't forget about another great intro. If only you would have had a nicer day going for you, I can't imagine this video being any better.
Keep up the great work, you are an awesome dude!
🔝🔝🔝🔝congratulations you have been selected among our shortlisted winners 🎊 CHAT 🔝🔝🔝 Above for something special 🎁💯
Bot
No way I won also lol
I'm getting annoyed at these stupid bots
This reminds me of when some people had issues with their adopted M16A1s.
And I love this fantastic video
Hey Scott! Love the videos; been subscribed for a while now, but I think this is my first comment. Anyway, when I was in the Navy (on my first submarine) I qualified on the M14. I loved that rifle. So, I just recently purchased a new manufactured one (the M1A, semi-auto variety - Springfield "Standard Issue"). I'm wondering how it's going to do with a "spicy meat-a-ball" round? Might you consider that for a future "Guns Go Boom" episode?
You should test the old 5.56 in a .223 chamber. How many rounds will it take to get to the center of an ar15???
You are an example of turning a life changing event into a life lesson. These videos are are entertaining and informative at the same time. Thank you for sharing.
Aboit 30 Yeats ago, some FACTORY federal ammunition blew my uncles savage 99 up.. BUT, it blew the magazine DOWN ND off, no age to the shooter.
Federal loaded 1 powder charge, 1. Bullet, ANOTHER powder charge and another bullet! (The loading machine did that several times) so my uncle had 2 or 3 more OOPS bullets.
Federal bought him a brand new rifle. -- I have read in the 90s and 90s they had LOTS that were over pressured... MOST hunters I know won't buy Federal to this day fir this.
Best one yet! And it shows again why the AR is such a good design
The water squirt bottle cracked me up.