I'd suggest putting in a roll over valve on that tank so it can breathe, I've had issues with tanks creating a vacuum or over pressuring and my engine running super lean or create a no start, or long crank scenario
Some of those auxiliary tanks like he took the lid off of have roll over valves built into the filler cap. If it didn’t have one he could order one. That way he doesn’t have to do any more welding on it since he already put gas in it.
Give that awesome gas tank a coat of clear. It’ll corrode fast in your environment plus the proximity of the steel frame will accelerate that process. Lookup a little thing called ‘galvanic corrosion’. Build looking killer so far
Word. Isolating the two metals from each other with rubber grommets and pads will do the trick. Of course then you create places to trap water and salty road spray. Designing it so mud doesn’t get trapped in the crevices between them and water can flow freely away helps a lot too. But yeah, bolt a piece of aluminum to a piece of steel and splash it with salt spray from the roads in the winter, and put it away wet… your aluminum will be swiss cheese before you know it. These guys will learn all about it when the magnesium core support on the Tesla rots off. Lol
that outro was stellar edwin. The ads are much better as well. Engaging and good use of your beautiful backyard. This channel is so much more than I could've imagined 5 years ago
Back in 2013 my dad had to sell his custom long bed extended cab ranger. It was yellow and it was sold to a guy near us in rilling prairie Indiana. I want to find it again. He completely redid the interior and everything, completely custom and cool. I wish I could find it
That gas tank made from road signs is the coolest thing I have seen in a while! The way you peeled of just a small strip for the weld was most satisfying. Could have watched you make those all day!
I would put some type of led lights inside the frame rails behind the Grind Hard end plates so they light up from the inside and the light protruding through the letters would look spicy bro.
I am a journeyman sheet metal worker and with all my years you guys always impress me with your trade skills. One of my favorite things to make motorcycle gas tanks and fenders out of is street sighs. I don't know where your located but it really sucks I'm on the east coast and all aluminum street signs are now being made with a plastic and aluminum bonded together so start saving as many signs as you can
I was watching some of your old videos can't stop thinking about how cool it must be to have a upgraded power wheels. Ever since I saw your first video with it I really wanted one.
Really looking good! Going to be one hell of a nice toy when she’s all done, and great looking gas tank came out really nice can’t wait to see this thing out tearing it up , great video was always ! look forward to seeing it complete👍🏼🤩💪🏼
Ya know, I'm kinda curious if ya'll perhaps have any plans to optimize the steering setup so that you don't have to fiddle with a hydraulic system just to try and get it aligned correctly and all of that, and instead just have already aligned with the front steering normally as a toggle alongside crabwalking.
Some rock crawlers use hall effect sensors mounted to the steering arms to find centre and use a momentary switch to trigger the steering to find the happy place between both sensors. I think they are a bit at risk of damage and have ideas of a cable rounded from steering arms to the cabin that triggers 2 micro switches.
It would be trivial to setup an arduino reading sensor off the steering column that activates the pump at certain going rates (so like half way through the steering turn you'll go a certain amount and then full send gives you same-same on the back). I'd say it would take a single day with all the parts required in hand. Cost would be cheap too, something like 50~60 doll hairs for all the stuff you'd need (arduino, any rotary sensor, any relay output with four relays).
6x6 that's nice. I was thinking of doing the same thing to my riding lawn mower. All I need to do is buy another transaxle extend the frame towards the rear connect the two axles with a belt and a pulley.
To make sure there is no leaks try using red dye pen and then spray developer on the other side of weld. If there’s any leaks the red will seep through
Good product but how are you going to apply it to an odd shaped closed tank like this? I don't know if it's the best way but i just use air plus soapy water.
@@Lucas12v well you usually do it before the cap gets put on. Cause you won’t have gas at the top 24/7 so if the top leaks a tiny bit it’s not to big of a deal. But you’ll also wanna test your gas fittings and what not to before you put on cap
Drill a hole in the frame near the back and jam some red bulbs hooked to the brake lights in there so your logo cutout lights up! or just wire them to turn on whenever
Right at the start,when you said ,'new tank',I was hoping you'd baffle this one.That 1st song kept me waiting for C.Eastwood to kick in the door...Kewl tunes,as always.This Monstrosity of a truck is just Badness all over.I like the suggestion of putting lights behind the frame endplates too.
Hey guy’s !!! Very nice tank !!! But use Acetone for remove the glue. I am a French Canadian Québécois. You have the best video’s in World 🌎 tanks guy’s ❤️
To test the tank for leaks fill it up with dyed water to full then cap it off and shake it around to see where it is leaking water the dye helps you see where the leak is
Hoses through the body need bulkhead fittings through the floor. Just my opinion. I really enjoy watching your modifications and looking forward to more.
The street signs give everything you build more character. The biggest weight reduction you will get will be by swapping out those boggers for a standard m/t
Have you ever thought of racing the Kernel? I have no idea if they would let you since its custom, but the Parker AZ 250 would be pretty cool to see you in.
Hey there he really showed some good and badass fabrication skills I like your style brother please be safe at what you are doing God bless you and just be safe please
I can only assume your new workshop is gonna be built out of tube steel trusses through the rogue fab bender, painted in steel-it & clad with ally street signs😆
Kinda funny seeing AG1 popping up as sponsors on most channels I watch xD Also, awesome build, can't wait for the completed build! Are there any plans for improved suspension like most prerunners have? Or is that not a viable option because of the twin axles and steering.
@@crippledproductions2194 Yes, I think it would be possible to build a 6x6 pre runner, but you'd have to completely rebuild the rear end, and come up with some design that could still incorporate that swing arm suspension (idk what exactly it's called but you know what i mean)
@@crippledproductions2194 I'm surprised to see someone still doubts these guys and ther fab abilities I'd be willing to bet by the time they are done the truck will be very capable and worthy of the pre runner name
It is gonna end up som much cleaner, stronger and better looking!! Im an RC lover and builder, and this looks like something you might see in "our World"... :D
@@crippledproductions2194 I live in the south east region and rarely ever see snow here. If we do it's less than a 1/4" of snow and it doesn't stick around long enough to enjoy
@@justinmoran9866 snow is a bitch to deal with. It’s fun for a little bit but it gets old fast. And it’s just as bad when it’s melting. Be glad you don’t have to deal with it for the most part lol
Hey Grind Hard Plumbing Co, it would be amazing if you guys made brake lights or running lights inside the grind hard plumbing co metal plates you added for the frame at the back
@Crippled Productions Totally, once you weld something, it's like, forever. I think weld is actually Latin for "unable to alter". Plus there's no way you could put in a little bunghole for a lighting fixture, cause there's a weld nearby.
It's a classic example of working harder instead of smarter. Same way they just filled the new tank with fuel without checking it thoroughly for leaks beforehand. The YOLO style is super entertaining but sometimes it's a bit sketchy.
![[FINALE] 💸ที่แท้พ่อเป็นผู้ถือหุ้นบริษัทพันล้าน เขากลับใจตอนนี้ก็สายไปแล้ว🙇🏻♂️#ละครคุณธรรม #short](http://i.ytimg.com/vi/yFwgjTFISUI/mqdefault.jpg)
I'd suggest putting in a roll over valve on that tank so it can breathe, I've had issues with tanks creating a vacuum or over pressuring and my engine running super lean or create a no start, or long crank scenario
Some of those auxiliary tanks like he took the lid off of have roll over valves built into the filler cap. If it didn’t have one he could order one. That way he doesn’t have to do any more welding on it since he already put gas in it.
Nice work! Fun fact: ELD means fire in Swedish. Very fitting for a gas tank 😊
Was just about to leave the same comment!
@@kristoferjonsson3362 same
@@MarbleTL jame fan
In long range shooting it means extremely low drag
svensker
I've never ever seen someone do CAD without a mouse !! well done, you've achieved it the hard way
I think you should put a work cab thing on the back and put a bed and shelf in so you can keep stuff in it and sleep it seems cool to me.
Give that awesome gas tank a coat of clear. It’ll corrode fast in your environment plus the proximity of the steel frame will accelerate that process. Lookup a little thing called ‘galvanic corrosion’. Build looking killer so far
Word. Isolating the two metals from each other with rubber grommets and pads will do the trick. Of course then you create places to trap water and salty road spray. Designing it so mud doesn’t get trapped in the crevices between them and water can flow freely away helps a lot too.
But yeah, bolt a piece of aluminum to a piece of steel and splash it with salt spray from the roads in the winter, and put it away wet… your aluminum will be swiss cheese before you know it.
These guys will learn all about it when the magnesium core support on the Tesla rots off. Lol
The bright side of having to use the Chains Required sign, is that it becomes part of a gas tank & you have room to hang a new sign up in its spot
that outro was stellar edwin. The ads are much better as well. Engaging and good use of your beautiful backyard. This channel is so much more than I could've imagined 5 years ago
Back in 2013 my dad had to sell his custom long bed extended cab ranger. It was yellow and it was sold to a guy near us in rilling prairie Indiana. I want to find it again. He completely redid the interior and everything, completely custom and cool. I wish I could find it
Very neat fitting tank. I like the street signs, also adds bonus corrosion protection. :)
Crazy they leave free ones on the side of the road.
@@lancestephenson9375 And thoughtful enough to hang them up out of the mud and grass.
@@NathanNostaw 🤣😅😅
That gas tank made from road signs is the coolest thing I have seen in a while! The way you peeled of just a small strip for the weld was most satisfying. Could have watched you make those all day!
I would put some type of led lights inside the frame rails behind the Grind Hard end plates so they light up from the inside and the light protruding through the letters would look spicy bro.
Scam
Ethan embracing his inner engineer makes me so incredibly happy. Never forget, you don't need to be an engineer to do good engineering.
I am a journeyman sheet metal worker and with all my years you guys always impress me with your trade skills. One of my favorite things to make motorcycle gas tanks and fenders out of is street sighs. I don't know where your located but it really sucks I'm on the east coast and all aluminum street signs are now being made with a plastic and aluminum bonded together so start saving as many signs as you can
they’re in northern idaho
Some people appreciate art but I have been able to watch it be created in front of my eyes.
Thank You Guys
Your "sign" tanks are the coolest!
This build is looking fantastic!
Thanks for sharing!
It’s honestly amazing to see how far this channel has grown good job grind hard keep up the good content
I was watching some of your old videos can't stop thinking about how cool it must be to have a upgraded power wheels. Ever since I saw your first video with it I really wanted one.
Really looking good! Going to be one hell of a nice toy when she’s all done, and great looking gas tank came out really nice can’t wait to see this thing out tearing it up , great video was always ! look forward to seeing it complete👍🏼🤩💪🏼
Ya know, I'm kinda curious if ya'll perhaps have any plans to optimize the steering setup so that you don't have to fiddle with a hydraulic system just to try and get it aligned correctly and all of that, and instead just have already aligned with the front steering normally as a toggle alongside crabwalking.
Some rock crawlers use hall effect sensors mounted to the steering arms to find centre and use a momentary switch to trigger the steering to find the happy place between both sensors. I think they are a bit at risk of damage and have ideas of a cable rounded from steering arms to the cabin that triggers 2 micro switches.
It would be trivial to setup an arduino reading sensor off the steering column that activates the pump at certain going rates (so like half way through the steering turn you'll go a certain amount and then full send gives you same-same on the back). I'd say it would take a single day with all the parts required in hand. Cost would be cheap too, something like 50~60 doll hairs for all the stuff you'd need (arduino, any rotary sensor, any relay output with four relays).
6x6 that's nice. I was thinking of doing the same thing to my riding lawn mower. All I need to do is buy another transaxle extend the frame towards the rear connect the two axles with a belt and a pulley.
Much improved!👍
Thanks man! Haven’t seen a comment from you in a while, but you’ve been here since the very beginning!
@@GrindHardPlumbingCo Yeah I’ve been pretty busy with my own projects but I still try to stop in from time to time.
The rear axles on that are the exact same as the front axle on the old Ford M151 my dad and I are working on. So cool!
Yesss about time I've been so excited for this one and the fire truck builds!!!! I was tired of power wheels
Same bro
Lights in the frame to illuminate the grindhard endcaps would look cool.
Putting a light behind those 2 pieces you made you put it in the frame like breaklies would be cool
I was thinking of how you use street signs for things, while I was at "work" today. It looks great.
Absolutely needed and welcomed some GHPC in my morning coffee! Thanks gents
I’m so excited for you guys to get your new shop built! I can’t wait to see it!
The Ranger is coming nicely together! Love the new style voice outro with summary.
To make sure there is no leaks try using red dye pen and then spray developer on the other side of weld. If there’s any leaks the red will seep through
Good product but how are you going to apply it to an odd shaped closed tank like this? I don't know if it's the best way but i just use air plus soapy water.
@@Lucas12v well you usually do it before the cap gets put on. Cause you won’t have gas at the top 24/7 so if the top leaks a tiny bit it’s not to big of a deal. But you’ll also wanna test your gas fittings and what not to before you put on cap
Drill a hole in the frame near the back and jam some red bulbs hooked to the brake lights in there so your logo cutout lights up! or just wire them to turn on whenever
Street sign fab is a must for every build
really class the self-built tank best grind XD
Awesome build can’t wait until it’s completely done!
Right at the start,when you said ,'new tank',I was hoping you'd baffle this one.That 1st song kept me waiting for C.Eastwood to kick in the door...Kewl tunes,as always.This Monstrosity of a truck is just Badness all over.I like the suggestion of putting lights behind the frame endplates too.
This thing is turning out to be so awesome. Love it keep it up guys!
I like the artsy filming randomly placed in the video. You need to put lights behind the custom plumbing end pieces.
Gas tank? Your insane. I've got a 52 f6 and I'm going to use a Marine tank. Nuts n bolts shake it up baby.
Your fabrication skills never cease to amaze me
7:15 but that's part of the fun,walking around seeing stars from brake cleaner fumes while you use grindy spinny cutting things.
Congrats guy's on making the cool gas tank. The Ranger is looking better.. great job.
I'm glad your adding baffles in the tank.
Hadn't seen any of this before.
Ford Ranger ! I'll be back sometime when this is over..
For the future, you should find a way to drain the frame rail you welded the grind hard plates to, water will collect in there
This one hits a little harder than the rest their content. Superb music and editing!!! Damn
Hey guy’s !!! Very nice tank !!! But use Acetone for remove the glue. I am a French Canadian Québécois. You have the best video’s in World 🌎 tanks guy’s ❤️
This video had a whole new feel and I’m here for it!!! Mintiest build yet
Beautiful fuel tank , very pretty and street signs is a nice patchwork , very very nice!
May need 3 pairs of shoes for that rig! Awesome!
The music in this video was exceptionally excellent. Even though it is always great, today it's really really good!
Can't wait to see the progress of this episode guy's !
No mention of that torch table?! Literally in love with that setup. Great work you guys.
He did mention the name - it's an ArcDroid CNC "plasma robot"
@@brianb-p6586 Thanks for looking out!
Love seeing how well you guys are doing! You make a great team.
This is some of yalls best editing yet!!
That is the coolest gas tank I’ve ever seen!
Y’all should do a aluminum tig welding video
This is your coolest build yet guys!
I can't wait to see this thing finished you guys are wicked with them tools man.
Add a brace across the frame where you took old one. You need something stronger than what that frame now has, remember, this isn't a regular 4x4.
Those end caps came out awesome! I gotta get an arc droid.
You guys should put some l.e.d.s behind them so they light up
To test the tank for leaks fill it up with dyed water to full then cap it off and shake it around to see where it is leaking water the dye helps you see where the leak is
Hoses through the body need bulkhead fittings through the floor. Just my opinion. I really enjoy watching your modifications and looking forward to more.
The street signs give everything you build more character.
The biggest weight reduction you will get will be by swapping out those boggers for a standard m/t
also that useless rear axle
@@taylorhickman84 yes get rid of the rear axle on the 6x6 so its no longer a 6x6, for weight savings and defeating the point of this build
@@taylorhickman84 so make it a normal boring pickup truck?? Why are you watching the series about a 6x6 if not for the 6x6....
@@tylerbrotzman7452 He did call it a "prerunner"
@@taylorhickman84 prerunner 6x6 ford ranger
Ethan your my spirit animal lol
Grinding Hard 🇬🇧
Next project, Barbie Kart 2.0 anniversary Super Redux Diamond Boogaloo edition, fastest build ever
Have you ever thought of racing the Kernel? I have no idea if they would let you since its custom, but the Parker AZ 250 would be pretty cool to see you in.
Best truck and popcorn by far! 🤲🏼
I love your street sign gas tanks haha. It's become like, a signature of yours
Hey there he really showed some good and badass fabrication skills I like your style brother please be safe at what you are doing God bless you and just be safe please
I can only assume your new workshop is gonna be built out of tube steel trusses through the rogue fab bender, painted in steel-it & clad with ally street signs😆
Still the sickest channel on the entire internet!!!
Would be good idea to add couple drive line loops to keep tank safe if ujoint brakes in bad way. That would safe that exalent tank you built.
Scam
Dang that was an incredible fuel tank build. Well done!
That fuel tank is a piece of art!
Sweet the mullet truck is back. Have a great day.
Time for a shop upgrade! Would love to see it
uhhhhh yeah this is my favorite TIG welding channel.
Kinda funny seeing AG1 popping up as sponsors on most channels I watch xD Also, awesome build, can't wait for the completed build! Are there any plans for improved suspension like most prerunners have? Or is that not a viable option because of the twin axles and steering.
Right? someone at Athletic Greens has good taste
This will never be a “pre runner” lol way too heavy, bad suspension design and it’s a 6x6. Too slow, too heavy, too design flawed.
@@crippledproductions2194 Yes, I think it would be possible to build a 6x6 pre runner, but you'd have to completely rebuild the rear end, and come up with some design that could still incorporate that swing arm suspension (idk what exactly it's called but you know what i mean)
@@geoffrey6000 this particular truck with how it’s built will never be considered a pre runner.
@@crippledproductions2194 I'm surprised to see someone still doubts these guys and ther fab abilities I'd be willing to bet by the time they are done the truck will be very capable and worthy of the pre runner name
It is gonna end up som much cleaner, stronger and better looking!! Im an RC lover and builder, and this looks like something you might see in "our World"... :D
I am amazed to see, that it's late April, and there is still snow on the ground up there.
It snowed last week too.
@@crippledproductions2194 I live in the south east region and rarely ever see snow here. If we do it's less than a 1/4" of snow and it doesn't stick around long enough to enjoy
@@justinmoran9866 snow is a bitch to deal with. It’s fun for a little bit but it gets old fast. And it’s just as bad when it’s melting. Be glad you don’t have to deal with it for the most part lol
The rims look sick on it
YEAAAAHHHHEEEWwwwwwwww Yeah Boys! Making my Friday, YET again! New King Gizzard album drops last night and now this vidjah. Ready to rock the weekend!
I liked the editing on this video, keep up the great work
You could build this channel with this truck. Love rangers😍
Keeping the parts of the signs visible that you could Is a great touch. When does the shop build start?
I love the repurposing of all the signs
Should make the "Grind Hard" plates into tail lights
The streetsigns gives character
That zip line was dope af ngl
Been a fan since you started boys! Always looking forward to the updates :) Simply fabulous work!
That is a sick plasmacutter!
plz more random footage of puppers throughout video, thanks!
Hey Grind Hard Plumbing Co, it would be amazing if you guys made brake lights or running lights inside the grind hard plumbing co metal plates you added for the frame at the back
but you just watched them weld it shut?
@@masonrogers9943 people have no common sense
@Crippled Productions Totally, once you weld something, it's like, forever. I think weld is actually Latin for "unable to alter". Plus there's no way you could put in a little bunghole for a lighting fixture, cause there's a weld nearby.
@@beerdedwanderer go look at the back of your pick up and tell me if you can see the frame rails
@@masonrogers9943 I have a bumper.
thats the coolest gas tank i have ever seen .😀
When you guys were emptying the old tank I wondered why you didn't just supply power to the pump and the slap a hose on the other end.
It's a classic example of working harder instead of smarter. Same way they just filled the new tank with fuel without checking it thoroughly for leaks beforehand. The YOLO style is super entertaining but sometimes it's a bit sketchy.
Nice dude! Everyone needs a 6x6 pre runner lol
Bout time for you guys a bigger shop.
Would make 1 hell of a overlander 👍
Every other channel I’ve seen takes a sip or ag1 what’s the deal can’t do it with a straight face and say and it taste good too 😂😂
Looking great gyes great show ✌
Should put lights in behind those chassis end plates. Maybe rear fog lights?