I have a 4000 psi @ 4 gpm and I get 4000 psi when I release handle but when spraying I only get about 3300. I have a 4.0 nozzle on the end and not sure what else I can do to raise the pressure...any advice?
+mperez27 The highest pressure you want WHILE holding the trigger will be 3500 - 3600 psi, you just need to set your unloader a little lower by lowering the 2 locking screws as shown in this video.
I have a economax em15-p 4000psi @4.0GPM, with the 0 degree nozzle the psi go to 3200-3300psi... I need to do your process for to obtain at least 3700-3800psi pulling the trigger?
Just replaced stock pump and this was exactly the info I needed to get it adjusted correctly. Thanks!
Best video i could find on adjusting a unloader. Good info and easy to understand.
GREAT JOB.
+Spencer Knight Thanks, glad we can help.
Excellent video. No BS and straight to the point. Doesn't get any better than that.
perfect info just got gauge thanks bro
Hello,
Thank you for the support! If you need anything further give us a call at (561) 964-3228!
Great vid dude !
Great video and explanation. Thanks!
.
Great video bro
Nice video, Helpful Information!
I have a 4000 psi @ 4 gpm and I get 4000 psi when I release handle but when spraying I only get about 3300. I have a 4.0 nozzle on the end and not sure what else I can do to raise the pressure...any advice?
+mperez27 The highest pressure you want WHILE holding the trigger will be 3500 - 3600 psi, you just need to set your unloader a little lower by lowering the 2 locking screws as shown in this video.
Nice video!
David Zabala Better Then Most !
Nice work.
Awesome info well done !
Good video, thanks for info :-)
thanks! Glad we could help.
Educational Video. 👍
Excellent .... 5⭐
I have a economax em15-p 4000psi @4.0GPM, with the 0 degree nozzle the psi go to 3200-3300psi... I need to do your process for to obtain at least 3700-3800psi pulling the trigger?
most likely
great. thanks
Ok I toke my unloader off. Now I hear a ball moving around. Is that normal?
If you don’t know....now you know!