Will the yellow ultimate wash and wax interfere with the hybrid ceramic wax at all? For.example make the ceramic spray harder to stick to surface? Or maybe wear the ceramic off after subsequent washes?
I’d like to echo this question. Considering washing my new tesla coming soon with Dawn dish soap to help make sure cheap dealer waxes are stripped, before applying the coating/protectant
I always use the Meguiars wash and wax for the body work, Sonax for the wheels etc, and Meguiars Ultimate Quik Wax to finish it off. Liquid wax is so easy to use. :) Okay, it's not the best wax out there, but my car is in a garage for most of the times. The wax holds pretty well I must say. 👌
The towel used for drying the car when first applying the ceramic wax can be used again during the second drying? I have the exact same drying towel and I'm planning to apply ceramic wax tomorrow.
Xrhstos J. Delavega it will be saturated after first drying and a bit waxy so will need to be washed and dried, you could do with a second one I’d say.
@@gillywash1487 thanks a lot mate. Are there some tips for washing this type of towels? Will be my first and wanna make it right. Directions say plain water 30 degrees Celsius and then tumble dry, but will plain water do the job?
Xrhstos J. Delavega yeah I usually just do a quick wash with similar towels so you don’t go contaminating them all or getting lint on them, no detergent as it will make it streaky or not as absorbent and tumble on low heat or naturally dry in the summer 👍🏻
You'll find drying once using these sort of ceramic sprays, or spray waxes. The product will enfuse into the fibres making the repell the water instead of collecting. To wash them, either grab some purpose made microfibre detergent, available from a few brands, on get non bio detergent. Always use liquid and not powder and never put in any comfort. I soak mine in a bit of white vinegar 50/50 with water for an hour to so prior washing. Wash at about 30degrees. If you have a tumble dryer use that on the lowest heat then leave to air out. If not, use the spin/drain cycle on your machine to get rid of as much water as possible, then leave to air dry. Hope that helps. Also, never wash your towels with anything else, like your normal clothes, towels etc.
Any chance of a video on your convertible roof cleaners as I would love to see the best way to use both the cleaner and conditioner. Love the content, keep it coming.
It is advisable to start brushing out intricate areas with the snow foam clinging as dirt buildup there is quite heavy and thus contamination of the mitt is reduced when contact washing.
I wish it would have shown or went over how many of those towels you need to dry off the car, does that 1 towel really dry off the car or did he need 2? Is it better then a chamois?
I been using this since 2014 on my e92. Love the product i do the stage 1 2 3 wax and some of there other wax. May take time doing but. Worth it in the end makes the car look brand spanking new.
Gr8 looking car 💜 & video. Ive been useing this product since the 90s i love them ? But thats a lot of product for 1 wash 😕i wNt to wash & pertect my cars all in one & go i want my car look good be shine .
This is everything I got for Christmas and loved it. With the meguiars ceramic wax would apply one panel at a time or do the whole car for the base layer? And the same question for the second application? Thanks
I watched loads of vids on this... And the best way is dry the car totally, and apply the ceramic wax one panel at a time, use 2 cloths one to rub into the dry paint and the other to buff off.... Just for the base coat..
Nice job on the 330e. I would be nice to mention that the + and - on the snow foam cannon are totally opposite to what you think. The thicker you want the foam more turn to - (minus) on the cannon. People return snow cannons because they can’t get that thick layer seen on TH-cam. Great video.
Love how people are complaining about the price. If you have a decent car and you want to keep it nice then washing it yourself properly is a great investment. I wouldn’t trust my cars with a car wash
A good pressure with a low psi rating between 900-1400 and gpm's above 1.6 along with a decent quality foam cannon will easily create rich thick foam. If you use a cheap pressure washer along with a cheap foam cannon you will never get that nice shaving cream like foam.
@All Seeing EYE only if you don't have a high rated pressure washer. A gas pressure washer's water pump will implode trying to push a large volume of water through such a small hole.
@@edubb2491Cheap electrics tend to favor psi over gpm. More expensive electrics like Kranzle favor gpm's over psi. When washing cars you don't want more than 1500psi and as high gpm possible especially if you want great results with a foam cannon.
Good video and I do almost the same but I treat each application of the ceramic wax as fresh base coat because I feel it will get better coverage. Meguiar’s am I tight in doing so?
Meguiar's UK which one to be exact? I am wanting to start a detail gig on the side and would love to use this washer. Because of hose length and ability to change pressure.
@@edgarreyes6480 - yeah that's why I asked their foam looked nice and thick. i had a power washer and foam set up before and i couldn't get thick foam I don't know what i did wrong. Maybe the dilution was off.
Cracking guide, well presented. Will say it makes me chuckle that the meguiars grit guard I bought for a meguiars wash bucket doesn't fit and just floats to the top.
I have bought the yelow soap and the ceramic spray ( and your bucket with grit guard). Do I have to dry the car before the firs lay of Meguiars spray? And Could I apply on gloss black surfaces? I
Also hybrid ceramic wax performs poorly if used in excess because the carrier ingredients are actually highly hydrophilic (water attracting). It really is hard to wash away all the extra waste carrier ingredients. So do yourself a favour and spray only twice every panel, maybe three on the hood or four on the roof.
I like to use the goldclass, can I use this quik ceramic wax to finish washes to maintain my carnauba look under this ceramic quik wax? or is better I use the gold class quik wax? I like this one because it's easy to use.
My husband’s routine to save time and money without sacrificing protection, skip the all purpose step. Use their least expensive shampoo after the foam wash. It’s the pink one and is popular. Then dry your car with rainmax, fastwax which is great on windows!
Question... many detailer say not to pre-rinse the car before snow foam as the foam then sits on top of the water and doesn't work as well... what's your thought? I've alway pre-rinsed but I do get there point
Love to see a vid of inner arch cleaning and your recommendations and also a video where you don't use a pressure washer for those of us that don't have access to them and the option of using snowfoam
WHY DO YOU NEVER CLEAN THE WHEELS THROUGHLY. Think how much grime will accumulate in the barrel and brake dust will easily get caked on without making contact.
Spray wheels and power wash off ....really! Bit worrying when giving that info. Wheel cleaners only loosen some grime, wheels are heavily contaminated and filthy they need physical scrubbing every wash to keep clean 🤔
Can you please confirm, if I can use the Meguires Ceramic hybrid wax without actually clay baring the vehicle or if the vehicle doesn't have a ceramic coating? Can this product used just like a nomal wax after wash etc etc, Thanks
Nice video however, makes me wonder about the power of the pressure washer. Most used at home are standard basic power where as You tube vids have super powerful ones which shows the product in a better light when removing dirt.
Don't use a powerful pressure washer, it can remove the paint and protection, remember it's not a dirty patio you're washing. Standard power washers as low as 300 psi is fine to use, the liquids you use are what helps to remove grime and bird droppings from your car not the pressure washer itself
Great product, I have everything.now I want to know after this all process how to protect car from dust?because black car 3hours after clean again Dusti,and can't remove dust with clothes. Becouse its making scratches.
Try to wax the car after the wash. A spray wax can help prevent a bit of the dust and if it continues; try waterless washes to spray onto the paint and wipe off with a clean microfiber towel.
Don't spray directly onto car. Buy a Microfiber sponge spray Ceramic Hybird wax on to sponge. Go side to side over each panel. Windows and rims. Let dry 5 minutes. Then hit all panels with water. For 5 minutes. Then dry with a Microfiber towel. Your done. Been using this product since 2019. Its now 2020 May! My customers love the long lasting shine. Its $15.00 at Wal-Mart. The sponge $1.97. Shawn
Just a quick tip: When using spray wax, once applied around the whole car, quickly mist the cars with the jet wash and then dry, this saves you from doing two passes. Thank me later😊
Wrong. With this specific product, if it’s the first time you’re using it, and you don’t have a wax on the car already, you’ll neeed to create a foundational layer. You must do the standard application method of “wax as you dry.” And then from then on you can spray on and rinse off the second time , and every other time using
Who’s is the Renault 5gt turbo in the back ground?? Very nice 😉 also I wish you would do a video for people that can’t Afford all that product. Not all people have a factory full of product at there disposal 🤪.... if we was to use what you just did to wash this bmw it probably would of cost us about £200 lol
I really like how you guys used a car that was actually dirty. It makes the process look a whole lot better
My thoughts exactly after wasting a lot of time watching people wash cars that weren't dirty to begin with!
Yeah I hate those videos where the car looks mint to begin with
Love the Renault 5 turbo in the back
Great video, been without a car for too long and hopefully this will change soon. I had forgotten how much I enjoyed cleaning cars.
So far this video is the best on how to wash your car for a DIY, thanks!
Will the yellow ultimate wash and wax interfere with the hybrid ceramic wax at all? For.example make the ceramic spray harder to stick to surface? Or maybe wear the ceramic off after subsequent washes?
I’d like to echo this question.
Considering washing my new tesla coming soon with Dawn dish soap to help make sure cheap dealer waxes are stripped, before applying the coating/protectant
This is probably the best video of how to take care of your car. I wish these products were available in India.
Great vdo. Which high pressure water system you using?
How often do I do all these procedures once? Is there any simplified routine that can be done in a few day interval?
Only wash an wax I use! Just got done waxing with NXT this evening
When ur car has more shampoos than ur wife..... :'(
In Canada we skip the multipurpose spray and simply a pressure washer would save some cash
I always use the Meguiars wash and wax for the body work, Sonax for the wheels etc, and Meguiars Ultimate Quik Wax to finish it off. Liquid wax is so easy to use. :) Okay, it's not the best wax out there, but my car is in a garage for most of the times. The wax holds pretty well I must say. 👌
Simply the best..😄
Good video guys....i use all your products on my new mustang .....the ceramic wax is fantastic....the water protection is great. Big thumbs up
are the windows washed together with the panels in the same fashion?
Looks good, b roll on those products, priceless.
The towel used for drying the car when first applying the ceramic wax can be used again during the second drying? I have the exact same drying towel and I'm planning to apply ceramic wax tomorrow.
Xrhstos J. Delavega it will be saturated after first drying and a bit waxy so will need to be washed and dried, you could do with a second one I’d say.
@@gillywash1487 thanks a lot mate. Are there some tips for washing this type of towels? Will be my first and wanna make it right. Directions say plain water 30 degrees Celsius and then tumble dry, but will plain water do the job?
Xrhstos J. Delavega yeah I usually just do a quick wash with similar towels so you don’t go contaminating them all or getting lint on them, no detergent as it will make it streaky or not as absorbent and tumble on low heat or naturally dry in the summer 👍🏻
Yes you absolutely can. Just keep the towel nice and folded so you have clean and dry sections for the second dry.
You'll find drying once using these sort of ceramic sprays, or spray waxes. The product will enfuse into the fibres making the repell the water instead of collecting. To wash them, either grab some purpose made microfibre detergent, available from a few brands, on get non bio detergent. Always use liquid and not powder and never put in any comfort. I soak mine in a bit of white vinegar 50/50 with water for an hour to so prior washing. Wash at about 30degrees. If you have a tumble dryer use that on the lowest heat then leave to air out. If not, use the spin/drain cycle on your machine to get rid of as much water as possible, then leave to air dry. Hope that helps.
Also, never wash your towels with anything else, like your normal clothes, towels etc.
Any chance of a video on your convertible roof cleaners as I would love to see the best way to use both the cleaner and conditioner. Love the content, keep it coming.
When you apply the ceramic wax, can you use the same towel for both base layer and secondary layer or do you use new towels for each rinse?
high class products.
what the make of the pressure washer used
Very good video. Explains everything well.
Good VIDEO! EXPLAINED well by steps!
It is advisable to start brushing out intricate areas with the snow foam clinging as dirt buildup there is quite heavy and thus contamination of the mitt is reduced when contact washing.
Yes. Using a good quality brush to wash little areas you can't get to with the mitt is a good practice.
I wish it would have shown or went over how many of those towels you need to dry off the car, does that 1 towel really dry off the car or did he need 2? Is it better then a chamois?
Nah if you get a extra large drying towel from harbor freight or meguires you only need 1 I tested it out
Just make sure to fold them in a square so you have a wet side and a dry side
I been using this since 2014 on my e92. Love the product i do the stage 1 2 3 wax and some of there other wax. May take time doing but. Worth it in the end makes the car look brand spanking new.
Do i need overtime at work to purchase all of those products as used?
Dude you do know this whole process of washing the car took him 8 hrs. 😂
@@jeffcortez7576😂
I love when I’m watching an ad and it gets interrupted with ads.
Gr8 looking car 💜 & video. Ive been useing this product since the 90s i love them ? But thats a lot of product for 1 wash 😕i wNt to wash & pertect my cars all in one & go i want my car look good be shine .
This is everything I got for Christmas and loved it.
With the meguiars ceramic wax would apply one panel at a time or do the whole car for the base layer? And the same question for the second application?
Thanks
I watched loads of vids on this... And the best way is dry the car totally, and apply the ceramic wax one panel at a time, use 2 cloths one to rub into the dry paint and the other to buff off.... Just for the base coat..
@@christopherhawkins5456 you get hella streaks by doing that
How’s the ceramic spray on window rubbers & gloss black abs grills etc please bud?
Nice job on the 330e. I would be nice to mention that the + and - on the snow foam cannon are totally opposite to what you think. The thicker you want the foam more turn to - (minus) on the cannon. People return snow cannons because they can’t get that thick layer seen on TH-cam. Great video.
Love how people are complaining about the price. If you have a decent car and you want to keep it nice then washing it yourself properly is a great investment. I wouldn’t trust my cars with a car wash
Dip the entire car in tyre shine!
How can it be a super rich snow foam when 95% of other good snow foams are designed to work at 10:1?
A good pressure with a low psi rating between 900-1400 and gpm's above 1.6 along with a decent quality foam cannon will easily create rich thick foam. If you use a cheap pressure washer along with a cheap foam cannon you will never get that nice shaving cream like foam.
@All Seeing EYE only if you don't have a high rated pressure washer. A gas pressure washer's water pump will implode trying to push a large volume of water through such a small hole.
No you misunderstood. Super rich he means strong or economical, which it isnt. 95% of other snow foams work better at 1:10. That was my point
@@reeseboi8704 900 psi with 1.6 gal min? Seems odd..mine is 2100 psi with 1.4 gal min..dosent make since
@@edubb2491Cheap electrics tend to favor psi over gpm. More expensive electrics like Kranzle favor gpm's over psi. When washing cars you don't want more than 1500psi and as high gpm possible especially if you want great results with a foam cannon.
Awesome explanation, this a lot.
Good video and I do almost the same but I treat each application of the ceramic wax as fresh base coat because I feel it will get better coverage. Meguiar’s am I tight in doing so?
My car will be 4 years old next month. 66.000 miles . Still literally looks like new, in and out. Only Maguire's products used.
the key here is the water host. fasten the rinse process. how long did you take to complete this whole wash?
Like an ultimate guide - awesome!
I washed my car today, only cost £78
Hahahahahaha
:)))
HahHahaha, made me laugh! Well done sir!
Home Detailing is expensive lol
Plus some hours and dedication then it got dirty the next minute you started driving it
Can you guys please do a video on the exact set up for the snow foam. Power washer and all...thanks.
We use our Ultimate Snow Foam Cannon Kit along with the Nilfisk pressure washer
Meguiar's UK which one to be exact? I am wanting to start a detail gig on the side and would love to use this washer. Because of hose length and ability to change pressure.
@@edgarreyes6480 - yeah that's why I asked their foam looked nice and thick. i had a power washer and foam set up before and i couldn't get thick foam I don't know what i did wrong. Maybe the dilution was off.
Cracking guide, well presented. Will say it makes me chuckle that the meguiars grit guard I bought for a meguiars wash bucket doesn't fit and just floats to the top.
I have a question, how do I clean the dry towel after use of the ceramic spray or other products?
the multi-purpose clear, can it be any multi-purpose cleaner? like Meyer's or Simple green? please advise,
hello great video, what pressure washer are you using ??
I have bought the yelow soap and the ceramic spray ( and your bucket with grit guard).
Do I have to dry the car before the firs lay of Meguiars spray?
And Could I apply on gloss black surfaces? I
Hi, Can I use Meguiar’s wash and wax with cannon foam?
It’s fine for you to spray as much product but for us it’s £10 each time
Not necessarily
only need to ceramic coat every 6 months months tho right?
Each time every month or more...
Yousef Al-A'ssaf يوسف العسّاف these sealants do last 2-3 months
Also hybrid ceramic wax performs poorly if used in excess because the carrier ingredients are actually highly hydrophilic (water attracting). It really is hard to wash away all the extra waste carrier ingredients. So do yourself a favour and spray only twice every panel, maybe three on the hood or four on the roof.
Nice vid.Wouldnt mind being a rep for Meguires here in South Africa.
I like to use the goldclass, can I use this quik ceramic wax to finish washes to maintain my carnauba look under this ceramic quik wax? or is better I use the gold class quik wax? I like this one because it's easy to use.
Hello
Do we need a specific towel or can we dry with a normal microfiber cloth??
I didn’t think washing my car was going to be so expensive...
Your car is your investment so why not spend some extra bucks to take care of it.
Same bro 😂.......before i used to do it with a dishwashing fluid mixed with detergent🤣
@@bernardoloya9153 lol... car is not investment its decrease its value every day since you bought it
Steven Bun - The amount of money you spend on a car. It’s worthwhile taking care of it.
Washing your car dont need to be expensive. But if you want it to look even better for a longer period of time it will become more expensive.
Would love to see a video of the Liquid version Ceramic Wax. Otherwise, all great work. That BMW came out looking beautiful
New ceramic wax arrives in march hopefully!
@@meguiarsuk I've got a moon roof on my car. Should I use the ceramic coating in it?
Thank You
Question, i live where there is a limited water used and i can only use self service car wash.
what are ur method when using self car wash service?
Hi a Canadian raised Brit here. I have a 2017 F350 and was wondering in Maguire's make a specific wax protection for polished/chromed wheels?
What is your suggestion on the hP of the power washer?
Wouldn’t it be better to use a non wax soap so the hybrid ceramic solution has a better chance to stick to the finish?
No
My husband’s routine to save time and money without sacrificing protection, skip the all purpose step. Use their least expensive shampoo after the foam wash. It’s the pink one and is popular. Then dry your car with rainmax, fastwax which is great on windows!
Can the McGuire's Ultimate Interior Detailer be used on seats that are leather or vinyl?
Great video, with some useful information
Watching this video made me appreciate why I let the dealership wash my car! It was exhausting just watching! :)
Question... many detailer say not to pre-rinse the car before snow foam as the foam then sits on top of the water and doesn't work as well... what's your thought? I've alway pre-rinsed but I do get there point
With our snow foam you need to pre rinse the car. It's different for every foam.
Always pre rinse.Spraying foam onto a hot car is asking for unwanted chemical activity..
@@marybetheby5184 very true that's why I never wash the car when the paint work is hot.... fortunately my drive is always in the shade
@@TheDarrenc1973 Yeah,,you snow foam dry hot paint that foam is going to sizzle!
Where can I get one of the black buckets? Got a yellow one never seen the black ones.
Should you rinse each panel as you wash it, or do you rinse the entire vehicle after all parts of car have been washed?
Love to see a vid of inner arch cleaning and your recommendations and also a video where you don't use a pressure washer for those of us that don't have access to them and the option of using snowfoam
So get yourself a pressure washer and snowfoam.
@@jeffcortez7576 I live in a flat with no outside tap..
Are all these products safe to use on a car that's been ceramic coated? Also I'd the hybrid ceramic needed if it's already been ceramic coated?
What’s the difference between liquid wax, wax paste and quick wax?
Am I the only one who noticed the R5 GT Turbo in the background, awesome looking. I had the previous one, the R5 Gordini Turbo, in black 😁
How many supreme drying towel needed for drying one car?
Just the one!
What a beautiful and perfect BMW!!🥰
WHY DO YOU NEVER CLEAN THE WHEELS THROUGHLY. Think how much grime will accumulate in the barrel and brake dust will easily get caked on without making contact.
everythingcarsishere mate he don’t even know how to wash a car ... follow auto finesse channel if you don’t already
@@birdcrazy329 auto finesse are great I swear by their products
Products are for pro this guy in the video isn't even close
Spray wheels and power wash off ....really! Bit worrying when giving that info. Wheel cleaners only loosen some grime, wheels are heavily contaminated and filthy they need physical scrubbing every wash to keep clean 🤔
Can hybrid ceramic wax be applied over ultimate wax?
Absolutely! Any wax being applied on the car will bond to any pre existing wax
theres still soap hanging off the front at 11:49
Excellent video as always
Well over due this type of video
Will be buying all these products on my next payday.
Where do I Buy the Black buckets from?? Be nice to have one to keep seperate from the yellow rather than having 2 yellow for wash and rinse
Love the hybrid ceramic wax but can I use it on my wheels? They are painted, diamond cut and clear coated?
Best to use something that you can accurately apply like our Fast Finish. Apply it to a microfibre towel and wipe. No buffing needed.
I use it on my 2016 honda accord sport rims
I was told that u have to throw away your towels after it’s been in contact with ceramic coating is this true?
Frank Bouma this is not a ceramic coating. It is a wax with ceramic technology. I have this wax and it does nothing to the towel
Wash big dirt off the windows too! Then use a glass cleaner to remove streaks!
Guys your heavy duty multi purpose cleaner is it safe to be used on painted plastics? As my diffuser as been sprayed black and my side skirts also.
Yes, if used as directed it is safe on paint.
@@meguiars thanks for your reply
👍
Where do u guys buy those towel?
Meguiar's still my favorite
what's to use for the windshield dan panoramic roof ?
Can you please confirm, if I can use the Meguires Ceramic hybrid wax without actually clay baring the vehicle or if the vehicle doesn't have a ceramic coating? Can this product used just like a nomal wax after wash etc etc, Thanks
Nice basic detailing steps... And meguiars end results is brilliant...
Looks good
For a spray ceramic very impressive
Nice video however, makes me wonder about the power of the pressure washer. Most used at home are standard basic power where as You tube vids have super powerful ones which shows the product in a better light when removing dirt.
Don't use a powerful pressure washer, it can remove the paint and protection, remember it's not a dirty patio you're washing. Standard power washers as low as 300 psi is fine to use, the liquids you use are what helps to remove grime and bird droppings from your car not the pressure washer itself
The first layer of ceramic wax, the base, is applied on wet paint then dried with a towel. Could I use a blower instead? As I would at the very end.
Great vid. Explained everything well!
Are these suitable for pearlescent paint work?
Great product, I have everything.now I want to know after this all process how to protect car from dust?because black car 3hours after clean again Dusti,and can't remove dust with clothes. Becouse its making scratches.
Try to wax the car after the wash. A spray wax can help prevent a bit of the dust and if it continues; try waterless washes to spray onto the paint and wipe off with a clean microfiber towel.
What’s the silicon dioxide content on the ceramic wax
There is no meguiar's heavy duty multi-purpose cleaner in my country, sad :(
Great video and results..keep up the great work.
Brilliant - when can you come & do mine? 😜 Ohh & my wife's car needs done as well 😃
Would I need to apply the liquid wax on then rinse and apply again if it first time
Don't spray directly onto car. Buy a Microfiber sponge spray Ceramic Hybird wax on to sponge. Go side to side over each panel. Windows and rims. Let dry 5 minutes. Then hit all panels with water. For 5 minutes. Then dry with a Microfiber towel. Your done. Been using this product since 2019. Its now 2020 May! My customers love the long lasting shine. Its $15.00 at Wal-Mart. The sponge $1.97. Shawn
Just a quick tip: When using spray wax, once applied around the whole car, quickly mist the cars with the jet wash and then dry, this saves you from doing two passes. Thank me later😊
Wrong. With this specific product, if it’s the first time you’re using it, and you don’t have a wax on the car already, you’ll neeed to create a foundational layer. You must do the standard application method of “wax as you dry.” And then from then on you can spray on and rinse off the second time , and every other time using
@@jg3_75 fair enough 👍🏽
Who’s is the Renault 5gt turbo in the back ground?? Very nice 😉 also I wish you would do a video for people that can’t Afford all that product. Not all people have a factory full of product at there disposal 🤪.... if we was to use what you just did to wash this bmw it probably would of cost us about £200 lol
aarzy woods sick ass the Renault 😃
May i know the water jet machine you are using
How do you maintain it and strip it to start over?
I wished I had time every other weekend to do this. 😀