2015 FIESTA ZETEC S 1.0 ECO BOOST WILL IT RUN ??? + WE INVESTIGATE THE BLOWN ENGINE
ฝัง
- เผยแพร่เมื่อ 23 มิ.ย. 2022
- USE CODE :- SR10 for 10% discount on your Car Vertical Check. Get 10% off car vertical with this link bit.ly/SalvageRebuilds
Click here if you would like to buy us a coffee :- www.buymeacoffee.com/SalvageR...
Instagram :- salvagerebu...
SRUK Merchandise :- www.stadiumsports.co.uk/club-s...
J W Smart wheel refurb 0800 533 5399
For all sponsorship, Business /media enquiries please email :- rebuildssalvage@gmail.com
Please note Rob and Chris cannot be contacted on the above email as we do not have access. If you would like to get in touch please use private message on Instagram and always include your contact number. We do not have any other social media including Twitter , facebook , Marketplace , etc
In this video we complete the fitting of the replacement eco boost engine and get to see if it runs ok.
Working at our fully equipped workshop in Kent we carry out tasks including Panel beating , Body work , Mig Welding , Sheet metal Spot Welding , Fabrication Chassis Repairs , Sand Blasting , Engine and Mechanical repairs , DPF cleaning , Restoration and Structural repairs on the Celette Jig frame machine.
We do hope you enjoy this video and Check out our other videos on all kinds of vehicles including Barn finds , Quick flips , First wash , Repairs , Salvage , Restorations , Will it run , Will it Start , Fail , Accident damaged , Cat S , Cat N , Cat X Copart auction bargains , Non Runner , NON Running , Banger ,Flood damage , insurance write off , fire damage , smoke damage , electrical fault , stolen recovered , Unfinished project and anything else that arrives at the #Salvagerebuildsuk workshop. #RobandChris .Please note We do not ' cut and shut ' and have no videos on this subject.
Please check out our back catalogue of some previous projects on various different makes and models including Ferrari, RS Turbo , Lambo , Land Rover , MG , MGF , Caterham 7 , Ford , Cosworth , Vauxhall , Fiat , Peugeot , Mercedes , Range Rover ,Bentley , Morris , Renault , Citroen , Honda , Toyota , VW , Series 3 , Evoque , GLA , Golf , 500 , Fiesta , Astra , Polo , Motorhome , Auto sleeper Camper , GTI , LSE , Lamborghini , Gallardo , LP 570-4 , Sierra , Midget , 360 , Transit , Crafter , Transporter , T5 , Combo, Berlingo , Partner , Mini , Beetle , Vivaro , Hilux , Sport and many more!
If you have a vehicle for sale that you think will be of interest to us please message Rob via Instagram and please include a contact phone number. We buy all sorts of vehicles , Boats and classic cars including Austin , Morris , Healey , Mg , Sunbeam , Talbot , Opel , XR2 , XR3 , XR4 , Bentley , Jaguar XJ6 XJ12 XJS , E Type , XKR , BMW E36 , 205 GTI , VW GTI , Viva , Astra GTE 2.0XE , Red Top , Triumph TR , VW Golf Beetle , Rover , MGB , 2CV , Midget , Nova , Chevette , Capri , P100 , lancia , Cortina MK1 Mk2 MK3 MK4 MK5 , GT6 , Jensen , Lotus , Bedford , J type , Minor , Datsun , Toyota , Sunseeker , Princess , Fairline , Windy , Hardy , RIB , Shetland , Fletcher , Bayliner , Searay , Pilot , Shakespere and many more!
We do receive quite a few questions regarding tools and equipment that we use for various jobs. Unfortunately there is to many to list but some of the brands we use include Snap-on, Blue-point , Makita , Sealey , Clark , Esab and Sykes-Pickavant .
If you are interested in a specific tool, please put your question in the comments section of the relevant video
Working at our fully equipped workshop in Kent we carry out tasks including Panel beating, Body work, Mig Welding, Sheet metal Spot Welding, Fabrication, Chassis Repairs, Sand Blasting, Engine and Mechanical repairs, DPF cleaning, Restoration and Structural repairs on the Celette Jig frame machine.
We do hope you enjoy this video and Check out our other videos on all kinds of vehicles including Barn finds, Quick flips, First wash, Repairs, Salvage, Restorations, Will it run, Accident damaged, Cat S, Cat N, Cat X Copart auction bargains, Non Runner, Flood damage, insurance write off, fire damage, smoke damage, electrical fault, stolen recovered, and anything else that arrives at the #Salvagerebuildsuk workshop. #RobandChris
Please check out our back catalogue of some previous projects on various different makes and models including Ferrari, Land Rover, MG, Caterham, Ford, Cosworth, Vauxhall, Fiat, Peugeot, Mercedes, Range Rover, Morris, Renault, Citroen, Honda, Toyota, VW, Series 3, Evoque, GLA, Golf, 500, Fiesta, Astra, Polo, Motorhome, Auto sleeper Camper, GTI, LSE, Sierra, Midget, 360, Transit, Crafter, Transporter, T5, Combo, Berlingo, Partner, Mini, Beetle, Vivaro, Hilux, Sport and many more!
We do receive quite a few questions regarding tools and equipment that we use for various jobs. Unfortunately there is to many to list but some of the brands we use include Snap-on, Blue-point, Makita, Sealey, Clark, Esab - ยานยนต์และพาหนะ
The best on TH-cam by a million miles. Pure craftsmanship from the pair of you 👍🏻
Couldn’t agree more, craftsmanship and wealth of knowledge 👍
Crikey Rob & Chris, that blown engine was seriously destroyed! After Chris took off the sump and we all saw it looked almost half full of smashed engine parts, I thought to myself “Ford should rename the 1.0 sump pan “parts collection box” 😂🤣🤔
😭😭😭
Love it! Comment of the week 🤣
Really appreciate the trouble you went to demonstrating the damage in the old motor, I'd deffo have a look just to satisfy my curiosity, keep up the good work lads.
You two really are the 10 out 10 Chris wow what a guy turlly Knowledgeable person . Rob Mr airbag Man and parts guy in one . I think you two should be very proud of yourselves 100% content every time
Re audio, I think you're missing a trick here. You could buy a dual channel wireless receiver from Røde which supports 2 clip-on microphones with a 70m range. With a system like this you could both be miked up and we would not keep losing half the conversation. Plus, you could set up the camera on the tripod when you are both working on a car but still record perfect audio from both of you without having to be within the IPhone's very limited internal microphone range. Cheers.
You don't have to unhook the coils, to crank and build oil pressure. If you hold the accelerator pedal to the floor and crank, this is call clearing mode. Which turns off the injectors, to clear a flooded engine. Which will achieve the same thing with out unhooking anything.
MOT in the summer is the best decision any home mechanic will make even if that means bringing it forward just once by 6 months. Nothing worse than trying to do your MOT repairs out on the street on a cold and wet winters day.
Made me laugh when you said without pausing to Chris 'that's when you almost headbutted the steering wheel' and without a change in tone straight back to the con rod investigation. Great video and showing the sump with a multiple engine parts is a sight to behold. Carry on with the great work Rob and Chris.
That wet belt is an Italian design. There is a great video about it being replaced and substituted by a mechanic that works on a taxi fleet, he shows and details the full procedure. Good job guys. 👍🏼
Iv never heard of a " wet belt " till a few videos ago
I think its a werid stupid design me
@@matthewc.419 ford claim it was to reduce friction and the belt originally has a 150k mile change interval. Its so stupid it costs near enough a grand to get the belt replaced on these ecoboost and needs specialist tools for this specific engine. The updated engine in the latest mk8 fiesta since 2020/mk4 focus has timing chain now remains to be seen how that holds up. The service intervals are too high and people might be getting the wrong oil put in same weight but not the one that meets the ford specifications for this engine so that might be wearing the belts faster too. Anything to save some miniscule amount of co2 and mpg at the cost of reliability smh
Is the mechanic name Alan 👍
Good to see the Fiesta back on the road so quick. Just goes to show, judging by the state of the old engine, why regular servicing is so important, even more so for the eco boost . Well done again Rob and Chris.
Love these Videos, The Glass is always Half Full with you Guys, these are the only Videos that i Watch from Start to Finish.
Ford should of never stopped using the 1.25 Zetec engine, it was brilliant
These modern range of engines are just designed to break it seems
Great work as always, new engine sounds perfect. Thanks for pulling the old engine open and showing the shrapnel.
There’s very few people I trust to work on my vehicles but you 2 would definitely be welcome. Great job lads👍
Another cracking video, one of the best channels on TH-cam. Thanks Chris and Rob
Brilliant work and thanks for taking us along take care
Great video again Rob and Chris, that is just amazing to see and know that engine actually ran . Well done both of you.
Loving the videos guys!! Keep up the great work 👍🏼 Love the more in depth videos thrown in every now and then 👌🏼
Holy moly gents. Great to see the new engine is as sound as a pound but that old engine went out in style! 👀😂 Not surprised to see the belt shreddings in the oil pick up but man, that rod wanted out 😅
I love watching you guys work, keep up the entertainment gents, much appreciated
It amazes me you remember where everything goes,great vid as usual lads.
Top work on the Ford Fiesta 1.0 EcoBoost guys. The car starts on the button and drives smooth. Awesome content lads have an amazing weekend and enjoy yourselves.
Thanks for the dropping the oil sump down to show us how the oil pump failed.
Thank you for the always authentic and enjoyable videos Chris & Rob 😊
Ohh, the subscribers at I Do Cars would cream themselves over that sump pan! So much treasure.
10:22 Mike brewer be like "hold out ya hand" lmao 🤣 😂
really enjoyed the video and the banter. Amazing Job
“That’s cos half me tools are missing” 🤣🤣 made me laugh out loud… brilliant. 👌
Another cracking vlog,looking forward to Mondays episode, could watch yourself and Chris everyday of the week, have a good weekend
Love watching you two work as always. Really great content recently (but then again always is). Enjoy your weekend
Enjoyed that series and sump removal very interesting to see, great content 👍👍👍
The wheels look nice in black ( in my opinion ) and I'm as shocked as anyone else watching the video is when you showed the remains of the piston
thank you for showing the inside of the engine, it helps to understand what may happen to a engine what to do and what not to do with new engines, thanks again
The amount of times you’ve had a car on the ramp with parts ready to fit and Chris has beaten you to it makes me want to drop of my car with parts in the boot and see what happens 😂
Great video guys really enjoyed watching this! Hats off to you guys for the attention to detail. I hope my ecoboost doesn't suffer this fate but if it did I'd want someone like you guys to fix it!
Hi guys. I'm just catching up with your channel. Love what you do and your honesty and fair prices. I used to be on the tools and then moved on to teaching MV at a college. Just remembered one cheap tool that we used that would be handy for you guys. We used a mechanics stethoscope to locate noisy water pumps and the like. You can hear individual valve clatter, individual alternator bearing noise and even the coolant passing through the hoses! Lol. They are really cheap, get the type with the changeable probes. Saves any disassembly and is accurate. Hope this is useful. Cheers guys 👍🏼
Thanks Rob, Chris is amazing! So enjoy these video's :)
Hi Rob and Chris, turned out nice, glad you showed us the old engine internal faults. The wheels look great in black, and the mopped out scratch has almost gone. Good buy for someone as usual. Alex.
Great results gents. A reminder that those small turbo engines must be serviced regularly 👍
another superb job..what a team..thanks again for great content...really enjoyed that
Love the change in tempo of the music on time lapse.... makes Chris look like he's dancing 🕺
You chaps always do such a great job. Love the vid!
Thanks for the show and tell with the damaged motor. Great job guys.
Well done guys. Great job as always 👍.
Great video as usual Rob!
Fiestas looking great :D
Great work!
That engine certainly went Boom!! Nice to see what happened, so thanks Chris for stripping the sump off. Good job guy's.
You 2 really know your stuff brilliant to watch
awesome video rob n chris fiesta looks great
Another outstanding video guys. Thanks for performing a postmortem on the old engine,it was really knackered!! Lol.The replacement unit sounds as sweet as a nut.I hope you fetch every single penny you are asking for.
Great work again guys. This is pretty much the only salvage channel I watch regularly after 2 of the others I watch removed my comments and blocked me for criticizing some shoddy work😂😂Have a great weekend guys👍
Rob , Chris, The fiesta turned out really well. A very straight car with the better engine.
Thanks for showing us the internals of the other engine.
Nice little video,had it all, great content and delivery..😎😎👏👏🤩🤩
Fantastic turn around guys, well done!!
What amazing turn around you must have a great network to keep finding these jems 👍👍👍
Brilliant video guys, thanks for the info on the mileage on the new engine. Always wondered what mileage you went with.
Great video as always guys!! The broken engine is just crazy!! Wow.
Superb content,thanks guys!
Great video again Rob and Chris.
Well Rob I loved the Timelapse of Chris working his magic 😍😍👍👍
Another great video lads ,cracking little fiesta st 👍
Cracking Job Gents 👍only just watched it after knee replacement on Friday
Mangled that was Rob. Great little series, cheers.
Cracking video guys as always, didn't really think it would of thrown a rod though but these things happen and as you said Rob that engine is TOAST bar the few bits that you can salvage from it. Look forward to the next one! Have a good weekend guys!
The little man had a sledge hammer in this one, another brilliant video, can’t believe that damage 😮
Rob, Chris I hope some Ford guys watching this. That sump is a mess and Eco Boom 💥 fitting for these. New engine sounds lovely 👍 Great price
Hi Guys The work is relentless the content is really interesting and most of all its what you do best. keep em coming and Crack on
Brilliant job guys you are both amazing at what you do
Hi guys a very good explanation to why the engine went bang keep it coming
Excellent job and project Guys. Should turn out to be a great little car for someone at a reasonable price. Thank you for another entertaining series. I thoroughly enjoy them all.
great vid ,lively background music for 5
30 am !!! 😂 ,black wheels spot on , look forward to the next one 👍
Another excellent video chaps thanks again 👍
Hello Rob and Chris, what a great looking little car.
Not a very good advert for Ford though. Your comments on long service intervals are so right.
Thank you for taking the time to upload another video. Ged
Another top class job done, and good to see what the crack was with the seized engine. Well done lads 👏👏
Well done guys top work as usual
What a cracking little car guys , well done yet again.
Well done Chris and rob for finishing up that car, Chris even found some change! I like the wheels as they are, as you say they're not going to be done again. The car sounds sweet now and has a years new ticket so all good. I am with you on the question of mileage, it is illegal to 'clock it anyway but the car has done much more than the engine so that is the true mileage with wear and tear. You might expect a race engine to destroy itself like that but a three cylinder block, that is crazy. I think maybe they should change the service intervals. Thanks again Rob and Chris for such an indepth video hope you both have a great weekend. 👍 👍
great video keep up with the good work and a good price keep up with the good work
Great content Shocking what was in the sump Glad you showed that great work Guy's 👍
great vid boys and what a way to go for the old lump
Great job done lads,nice clean mota.
a great video gentlemen thankyou,have a good weekend and keep safe,👍
Amazing that that engine ran with all that metal in the sump ,great video lads as per usual
Hi. Love your videos but please please please can you put Part numbers on your videos! Without them it’s so hard to make sure I’m watching them in order! Many thanks.
Rob and Chris iam flabbergasted with what happened to that engine wow the other engine sounds so quite as well very nice another good one guys 👍
Another top job love watching you both you make me laugh too keep it up 👍🏻👍🏻
Can't believe how much damage was done to the old engine 😬😬😬😬😬😬😬 lovely video guys 😀
That Eco Boom engine really lived up to its name.😂
Thanks guys - silver wheels for me everytime - another great video
Well, what a result!! And what a mess that Conrod and piston were in! Really good video Rob and Chris! 👍👌
Superb video, what great content and well narrated guys, seeing the inside of the sump of the original engine was just amazing. I know you won’t want to hear it guys but far to cheap again, thanks though as someone is going to get a great motor for a fraction of the cost. I love SRUK! Please keep up the good work. Thanks as always. Dave.
It’s the going rate 👍
Love the strip down of the engine to show what went wrong with it and the explanation of the cause (that’s toast) 😉😆👍 love it 😍 keep on doing what you do well much respect ✊
Great to see the damage in the sump. Keep up the great work.
Another fantastic video....Thanks lads, really enjoyed that.👍👍👍👍👍
Rob/Chris good you said you just going to get another engine unbelievable good video
That’s the Eco Boom 💥 😂 ! What a mess that engine 😂 ! Great vid lads, nice little Fiesta now 👍
At last! Been waiting for my Friday relaxation video - miles better than yoga-
Loved it. See you in the next one👍🏻
It was just like watching an episode of 'Silent Witness', appreciate the autopsy!
“Is it going to be a Yes moment ?” Of course it is and no doubt in my mind either Rob..! Cracking video as always from you both and as always I’m looking forward to the next one 👍🏻❤️
Hi Rob and Chris, I know it’s not but you two make it
Look so easy I think cus you both enjoy it so much 👌
Super job well done. Like the new music boy can Chris work to that!😚. I noticed Chris was trying to nick the air fresh from the inside mirror...Trying to think for some music for you Rob!! Enjoy your weekend guys, thank you again...