What Could Possibly Go Wrong...Go Fast Parts & Test Flight on Cameron
ฝัง
- เผยแพร่เมื่อ 29 มิ.ย. 2024
- Use code JIMMYSWORLD50 to get 50% off your first Factor box at bit.ly/3DNmTRd!
Cameron Gets new go fast parts! I give her a test flight.... What could possibly go wrong!
0:00 The Mighty Cameron
2:04 How to keep the wife happy
4:38 The Silver Bullet
6:57 What's in the box?!
12:47 Well....crap...
16:30 First start...maybe
19:17 Here goes...
23:22 Elvis update
Awesome T-shirts here: www.SaveThe310.com
Facebook: / jimmys-world-104845438...
Instagram: / therealjimmysworld
View the Entire 310 Series: • I just Bought 3 Abando...
Other Abandoned Airplanes:
Abandoned for 20 years, Will it RUN? 1947 Bonanza V-Tail • Abandoned Airplane Wil...
Abandoned 7 Years, Can I get it running? 1968 Piper Aztec • Abandoned Airplane Wil...
10 Fastest Cheap Airplanes You Can Buy For Your Family • 10 Fastest Cheap Airpl...
10 Fighter Jets You Can Buy! • 10 Private Fighter Jet...
For Business/Media: therealjimmysworld@gmail.com - ยานยนต์และพาหนะ
Use code JIMMYSWORLD50 to get 50% off your first Factor box at bit.ly/3DNmTRd!
Usually product ads in TH-cam videos are dicey crap, but I have to say, we have been eating Factor meals for months now, and they are SO GOOD! Like better than restaurant quality good. We love Factor!!
Unfortunately they don't deliver to Newfoundland, Canada lol, but I tried.
This stuff better be good, my friend! 🤣Just placed an order with your code. And I hope your kick-back from them is at least enough for a gallon of avgas for Cameron. Nice work on that mag! Let's break 200kts! 🤙🏽
Good work Jimmy, here's an idea when changing the mags. Put the engine on time first then pull the mag, use a white out pen and mark the gear before removing it. Put the new mag next to the old one then transfer the gear with the marking the same position. I think you'll save a lot of time there.
This man can take anything that someone else would put you to sleep and make it fun to watch ... that is because he understands that keep lightheartedwith a little of humor and you will capture the attention of those you want to reach and that is all the followers of his videos which is us ... a master of teaching in a way that can get it done and make it fun ... thank you Jimmy for being you ... one of a kind ... I think of you as a young Howard Hughes who made his Dreams come true in Aviation ... l am a fan ... keep it up ... I enjoy all your videos ...
That letter in the box about not touching the switches was a great example of knowing the customer 😁
Jimmy, I have to say as a student with only 11 hours I may be very new to aviation but I hope you can respect my opinion. Mary Ann over Ginger every day of the week.
Always Mary Ann.
Definitely Mary Ann
Was this ever a question? And BTW Betty over Wilma.
Always mary ann she was miss nevada and loved the devils lettuce What can possibly go wrong… Betty or wilma.. id probably go with betty. But i think barney was giving it good to betty. Even their kid was named BAM BAM so he was doing something right Id have to go with wilma Fredd looked like he drank and ate too much and probably wasnt giving it to wilma like she needed So id have to say wilma. I see you and i raise you .. jane jetson or judy jetson (as long as she proves shes over 18 ) And for democrats.. shaggy or scooby .
New shirt...."Don't touch the switches!!!".
I like that one!!
You are one of a kind Jimmy! Thanks for being you!
You put that mag in like a surgeon, Jimmy. Like a surgeon! Oh, and Mary Ann all...day...long.
Jimmy it's so much easier to sneak up on The timing when your Whispering to it. obtw like your TDC Dial indicator easier to see Piston "Dwell"
Hey Jimmy this has to be a money spinner The Elvis wedding jet with everyone’s favourite “pastor Jimmy” 😂👍👍👍
This is the first time an aviation video has made my mouth water.
Jimmy SkyKing, could have sworn that Elvis walked through in the back ground... Karate CHOP! 🤚
You need to get a "Best Tug" from Mike Patey! 😂
I have 42 years in aviation, and I enjoy the thinking process as you transition from book learnin to being a real mechanic. I really enjoy these videos. Of course, I have no idea how you can buy so many aircraft and put the money required to make em airworthy.
Little known fact...Jimmy has a money tree in his backyard and he lives in Florida so its ripe all the time 😎
@@RT10Viperman just shy of a Quarter of a Million for Elvis??...I think he has an ORCHARD of those trees..
Actually, @@anthonyivy1305, it was just a tad over a 1/4 million.
He has to be a trust fund kid. Or lottery winner. He drives a V-12 Mercedes, so immediate cash is always available.
In another video from about a year ago, he talks about how he started a company years ago. He recently sold it for quite a bit of money which left him a bit O' cash to play with. ;)
This is the type of content that I watch Jimmys World for! Thanks. Love it!
The most important step to installing a Lycoming EIS mag is to make sure that as soon as you remove it from the shipping box that you drop it into the nearest trash can and forget you ever ordered it.
Well done Jimmy! Get that other mag on and you're gonna be a bona fide rocket pilot. BTW, it was ALWAYS Mary Ann! Ginger was too fake.
Look forward to all the updates as you live the dream !
I’ve flown the Plant City pattern many, many times! Got my license there and lived in the Country Hills subdivision on Turkey Creek road for 16 years! I haven’t lived in FL for 20 years though. The FBO was owned by Mitchell Enterprises when I flew out of there in the 90s. I worked for Breed Technologies in Lakeland (now Key Automotive) and for a two year stint as the Quality Manager of Gatsby Spas across Airport Road from the airport. Volunteered at Sun-n-Fun every year. Subbed!
Line up the mark on flywheel
You definitely need to get a Best Tug before you need a new back! ;)
I'm sure Mark Patey would work out a deal with you.
Great video, Jimmy. Thanks.
Hey Jimmy, I noticed Cameron's Nose Gear Tire is Low on Air! It flattened out pretty good @ Full Power!!! Just thought you'd want too know!!! Probably better check the Mains also!!! Yee Haa,,,Fly Onward Brother!!!
Love your videos, interesting stuff and you have a awesome sense of humor, never boring, thank you
Hi Jim! Love ur plane and vids! I saw that your plane went 200kts ground a while ago! I thought you might be posting about it! #SaveTheElvisJet! x
Thank you for your content.
Mary Ann (Dawn Wells) was not only an actor but a good person! May she rest in piece!
She was wonderful.
Another nice Video Jimmy! This rocket goes even faster now! You know you need to get the 2nd mag into that thing.
Happy landings and #clearprop Jimmy! o/
This was a good video Jimmy. I liked the way you were so interactive with the camera and focussed. It was so great
Ginger or Mary Ann? It's Lovie for me!
Awesome Jimmy it works great video thanks
Elvis' Ghost picks up Sandwich and goes back to the Hotel..... HE'S ALIVE !!!!! :P
HAHAHA You gave it the ol' Barney Fife karate chop!
Go Jimmy!
Jimmy, it’s not going to get easier pulling those Airplanes around as you get older and based on the Gray hair you have now vs when you started doing this stuff maybe it’s time to contact Mr Patey and get yourself a Best Tug.
The title made me think of Matt Younkin in his Beechcraft 18.
You gotta just dig your work Jimmy, 💯
Thank
s for sharing! don't prang your prop!
Good work man.
Dude you're such a little kid I love it!!! Haha
Jimmy, I greatly enjoy drawing aerial vehicles. I drew a few that were shaped as plus signs. It has four engines, which are turbojets. Every front and rear of those surfaces, including the wings, was exceedingly sharp. What's the purpose of this? Blunt surfaces don't promote excellent laminar flow. It does promote turbulence, though. I certainly don't want to have that. Those four engines, I designed it myself. I'm thinking they're approximately thirty feet in length and eight feet in diameter, with the exception of the nacelles of them. Those nacelles will additionally be exceedingly sharp at their fronts. That's true of the eight blades of the single fan. Each of those blades will nearly be four feet in length. The reason why they won't be is because of the ring that'll be pressed onto the front of the shaft, which will be located in the exact middle of the engine. I'm not going to describe any more of this turbojet engine. I want to patent it. What I will additionally type about it is that it's a straight through design. That's what the air will be doing while it travels through it. What about the laeding gear? There might not be any with this aerial vehicle or AV. Where will the cabin be? They'll be where the vertical and horizontal sections intersect with each other. At the top, the bottom and the two sides will have air directional panels, which will deidect air so that it will travel above, below, and to all sides of the vertical sections. This AV will be approximately a hundred feet in length. The height and width of it will be the same, at forty-eight feet. Why will they be that size? It's because of the scramjet engines after those air directional panels. Each of the fronts of them will be 12 feet square. 12 times 12 is 144 square feet of frontal area. The 3nd of this engine will only be 12 square feet. How will it come off the tarmac? At the ends of both the vertical and horizontal panels, which comprises the fuselage, will end in the control surfaces. What will help control the front of the AV and help it to leave this planet? By having a relatively wide kinards attached to the horizontal section of fuselage, behind the cabin. This will help stabilize it and act as a pivot point or fulcrum. When the elevators are tilted up, this will allow the AV to elevate upwards. Whenever they're tilted in the opposite direction, you know it'll be tilted towards the ground. I remember what my brother in law told me several years ago. He said there was a man by the name of Berrnulli's. The idea he thought about was to shape the wings so that the tops or bottoms would have more lengths to them. This causes them to lift the AV. Not so with these symmetrical surfaces. All of them will be the same distance at the top and bottom of them. Why not use Berrnulli's principles? I prefer to be unique, and neither do I want to copy from other people's designs. At the end of the vertical section, this will be where two rudders will be. Each of them will be 12 feet in height. Jimmy, that's all I'm going to describe to you about this,AV. Continue having yourself a nice night. B'bye.
Hi Jimmy! If you are ever flying in to KGNV, let me know. I'd be awesome to meet you. Your videos are great! There will be a fly-in event on March 25th if you are interested.
Allways excited for jimmy’s world content! Best on the tube
That little plane is awsome
Another cool video Jimmy, watching you move the airplanes by hand, have you thought about something like a tug from best tugs
@14;15 "fixed" you say. Really❓🤣🤣 Great video 2x👍
Thanks!
Great job Jimmy ,entertaining as ever. In true aviation jargon CIGCP😂
Maybe I should see if I have some family Mooney owed to me with that merchandise!
I love that little plane
You should have a give away to spend 24 hours In that Elvis jet.. get some music food and some baking soda to help clean her up lol. And imitate Elvis with the white nose lol 🤣 the fuel wow and speed of that aircraft is amazing 😍... I want one two or is it me want two one 😂
If I dont buy a FACTOR Food box...I save 100% !
Mounting that sparkerator is like playing a game of Operation
Mary Ann.
Hey, your production quality is going up by leaps and bounds. 👍
Hi from Australia Jimmy . Just wondering if it's worth your while buying an inexpensive quad bike with a reverse gear to use as a tug. It would surely come in handy maneuvering your planes around
Great suggestion. For kicks, Jimmy could squeeze an LS6 or similar into it and move those planes around like there's no tomorrow. It's the least he could do for the Lancair. 🙂
Solid episode
I love Jimmy's World, it's fantastical 😎💪💯
Got to be honest buddy Thetford looked like cat sh, and I guess it tasted the same as you didn't finish it
Hey Jimmy, good thing you turned on that turn coordinator.
Jimmy thank you for being a hoot.
I was thinking where all your sound effects came from. It's a Tim Conway nock off.
Ever considered getting a 2nd 6 pack of instruments for the right side of cockpit panel
Ive been eating Factor for a while now, great product.
Knowing your luck it will be 180deg out 😀😀
Can i get a Clear PROP!
Mary Ann!!! Clear Prop... thanks Jimmy...
It seems like the nose wheel tire is a bit deflated at 18:10.
I was thinking about the Elvis jet, If that museum is a 501c that currently has the engines, why not donate the jet to them as a tax write-off under the condition you have rights to produce videos on its static restoration for display there. Then you profit from your videos and still are doing a nice thing for the public, preserving a rare example of a private jet with a cool history. Kinda how Kermit Weeks has his restoration videos and the videos done by his staff about builds like the Jenny and the Messerschmitt build.
There's a question whether Elvis ever was aboard let alone flu on that plane
Guessing a write-off of that size would be a substantial money loser. No slight to Jimmy in any way, but I cannot imagine his income is so high that he's paying enough in taxes to make that work...I could be wrong.
@@Lucky-ou4vz My guess is, Health and viruses are not an issue here but he may have "flew" it or he may have not. If he had flown it, is no matter if it has collector appeal.
@@Lucky-ou4vz I don't believe he was ever on board the plane or even seen it. You've probably heard Roy McKay?
You need a Best Tug for pulling those planes around.
Haha, Jimmy how come ya didn't use old Dan's whistle for TDC ?? ( man I love that lil hot rod )
Cheers From Australia
Definitely Mary Ann! RIP
Greetings from Arkansas
Pull all the top plugs when setting timing. The hot mags can fire!
EAGLE IN THE BACKGROUND!!!.....HILARIOUS!!!
I have never installed a mag where you set and forget it without some minor twist while the engine is running.!
Jimmy (Freddy Jr.), love to see a vid of you singing "We Are the Champions"!
Love the channel Jimmy!!!!
awesome 😎
Hey Jimmy. You need a personal plane tug! Patey Bros best tugs. Supporting your fellow aviators and TH-camrs! Lol
She deserves a sweet new paint job, Jimmy!
Awesome video. Keep them coming.
I love your videos and everything you do for the community
SWEET 10% saving in fuel consumption and one sharp looking FAST plane. What more could ya ask for. That plane is my dream
9:27 i make that same sound when i get near a prop or a rotor !!!!
Best Tugs
MaryAnne of course.
I think you need a garage sale riding lawnmower to move your airplanes around with.
That's exactly what I did. That 310 is definitely a candidate for a homemade tugger.
@@terrallputnam7979 I use a JD 304 to move all my trailers, project cars and even my neighbors airplaines around with. It has 4 wheel steer so it can turn an 19 inch circle and I mounted a trailer hitch ball on the front so I can also push things where I want them and see where i'm going with them. This allows me to pack the trailers in close together. But any good riding lawnmower will for for Jimmy, at his hanger.
Good Video! How about a BTS update. BTW..... Mary Ann Hands Down!!!
13:20 - It's not even a question, really. Mary Ann. I mean, don't get me wrong, either, sure, but if you Could and Had To, Mary Ann, hands down.
Jimmy, You're having too much fun !
😂😂😂😂😂😂. Love the note.
Interesting video. Thank you. Jimmy
Even the white prop!
BOTH!
Jimmy you need one of those remote dollies for moving your planes I think they are called Air Tugs
That sucker fires up like it has a hemi in it!!
The next 24 with the ghost of Elvis?? Did I see that correctly?? What could possibly go wrong??
Well Jimmy, if one plug is dirty there all dirty and need cleaning, not just one of them. As far as the magnito they either work or they don't. Much like my radio electronics after I rebuild them. When I do it right they work just as intended to work and when I don't it gets expensive as soon as the power switch turns on. Usually no second chances and in your case hopefully you do not start the motor up so you can leave the ground to find out it's not working right.
Love the videos sir. Keep them coming. Your videos have struck a great interest in airplanes that I never had.
Jimmy, paint the spinner on the lance air. It needs a beauty mark. Kind of like a mustang, lol.
The magneto whisperer!
Show me where on the magneto did Jimmy touch you . Damn he touched on the switches......no one touches the switches . Jimmy you Magneto botherer 😂 .