Cleaning the rear derailleur on a road bike. Replacing the derailleur jockey wheels
ฝัง
- เผยแพร่เมื่อ 1 ก.ค. 2024
- Greetings, fellow cyclist.
A carbon road bike with a Shimano Ultegra groupset was brought to our bicycle workshop. This bicycle has been ridden for many years, but it has never been serviced in a bicycle workshop. Even high-level components require care and repair. In this video I will show you how to replace the rollers and clean the rear derailleur of the bike so that it looks and works like new and looks very nice.
00:00 Maintenance derailleur shimano ultegra.
00:19 Removeing the rear derailleur of the bicycle.
00:54 How to remove bicycle rear derailleur jockey wheels.
01:23 Cleaning the rear switch in gasoline.
03:17 How to clean the rear derailleur of a bicycle.
04:20 Washing the rear switch of a bicycle with a high-pressure water jet.
04:56 Why replace the jockey wheels on the rear derailleur.
05:59 How to properly install bicycle rear derailleur jockey wheels.
06:58 We tighten the bolts to limit the movement of the rear derailleur of the bicycle.
08:29 How to grease a bicycle rear derailleur.
09:42 Installation of a rear derailleur on a bicycle.
If you liked this video,
share this video with your friends ❤️
It will help the development of the channel! 📈
Ask your questions in the comments 👇
❓ ✍ 👇 - วิทยาศาสตร์และเทคโนโลยี
❤ help the channel get better!
🚀 share this video with your friends
❓ ask your questions
What kind of cleaning solutions,do you use?
Interesting video very quiet great with no crap music many thanks
Thank you for your comment! 😍
if you liked this video,
share this video with your friends ❤️
it will help the development of the channel! 📈
Great job Rupert 👍👏🚴🚴🚴
thank you for your comment! ❤️❤️❤️
Share this video with your friends, it will help the development of the channel! 📈😘
Świetna robota. Gratuluje. Z przyjemnością do takiego serwisu oddał bym swój rower do przeglądu.
Dziękuję za komentarz! 😍
jeśli podobał Ci się ten film,
udostępnij ten film swoim znajomym ❤️
pomoże to w rozwoju kanału! 📈
Like the cleaning videos! Thank you for your work! 🚲
Thank you for your feedback!!!!! 😘
loved it , but love my ultrasonic cleaner to :)
😺
Ultrasonics are great! The secret tip is to put a sealed glass container in the tank, that way you can use volatile solvents like kerosene or metho, without stinking up your workshop.
Panie Kochany! szanuj skórę, pracuj w lateksowych rękawiczkach
Dziękuję za troskę. Nie zawsze jest to wygodne, zwłaszcza gdy nagrywam wideo😺
Thank you for your SUBSCRIBE ! 😘❤❤❤
Gostei muito desse vídeo
é um prazer ser útil! obrigado pelo vosso feedback 😘
Great job ❤
😘 😍
Poreso esbueno darle manteniento alos componente delabisicleta para no cojer tanta lucha
¡gracias por el consejo ! 😘
I don't recall re: the ultegra deraiilleur, but for example my Altus derailleur, one has to be careful not to install the pulley.wheels the wrong way round, i.e. you can't just flip them over, as the spacing is a little different on each side... made that mistake once, and couldn't understand why the chain was rubbing on the cage...
I grease the pin also that goes thru the bushing... not sure if that helps, makes no difference, or hurts...?
For some reason, the manufacturer does not apply lubricant to this node)
but I lubricate it, why not?)
Nafta oświetleniowa dobry pędzelek z PCV i syf schodzi później można wypłukać to benzyną ekstrakcyjną ....i jest lala
👍
8:29からのディレイラーに塗布しているのはグリス(シマノ純正?)ですか？
それとも潤滑油(シマノ純正?)でしょうか？
使用した商品名を教えていただけるとありがたいです。
divinol fett top 2003
Hi, I would like to know what kind of lube or grease or oil you are using for the upkeep of cycle parts.
Hello. For bearings and other places where a thick grease is required, we use Divinol calcium grease. For the chain, any chain lube from a bike shop (for example, Shimano) is suitable
@@GoodBicycledo you recommend WD40 the one specified for bikes ? I dunno but i switched to MucOff bike chain lube and its so much better 😅 i dont think ill buy wd40 anymore
What compound did you used ON THE RIMS 😮 to PREVENT anymore/ furthermore rust in a nearby future ?
( let me guess : ... we 40 ... (?) ) 😮
shimano oil
hi I appreciate your video. one question please: what kind of liquid to clean do you use?
"What kind of cleaning liquid do you use?"
- it is refined gasoline ))
thank you for your comment!
Share my videos with your friends, it will help the development of the channel! 😘
How tight the pulleys' screews are? I never got if they need to be loose to avoid friction or not
Tightening should be done moderately. but you should realize that the dust covers reduce the free travel. so you should tighten the bolts after the bike has been on the road for a while.
use loctite
👍
What is the yellow grease called? ANd the read oil.
mineral OIL
What name plain water u use to cleaning dearileur?????
This is refined gasoline, we call it "galoshes", the closest analog of coleman (camping) fuel
Didnt you misplaced the cogs ? I think the one with the proper bearing should the the guide pulley and the other with the ceramic bushing, the tension pulley.
That's right. We even found an official manual for this switch before we installed it. The wheel, which has a ceramic bushing, is usually placed on top
Why don't you use an ultrasonic bath?
Thank you for your comment! ❤️❤️❤️
Share this video with your friends,
it will help the development of the channel! 📈😘
So take old jockey wheels out put new ones in. Done. 😊
😺
use threadlocker @ pulley screws each time you remove them is not optional.
crisp videos.
thank you for your comment! 😘
get sonic cleaner and save yourself the trouble, there should be grease on the spring where it hooks on the bar
Thank you for your concern. Ultrasonic cleaning has already arrived and you will see it in future videos😺
Nie jestem przekonany czy do ceramicznych kółek stosuje się smar. A na pewno wiem, że fabrycznie go nie ma.
W razie potrzeby można dodać trochę smaru, ale jest to również możliwe bez niego, zwłaszcza w przypadku nowych kół
BRAKE CLEANER + AiR 6 BAR = 3 min PRoFIT....
thanks for the advice ! 😘
アルテグラ 安いパーツですね
やっぱりいいフレームには いいパーツを着けたいですね
ジュラエースとか カンパニョーロとか マビックとか
私たちの国では、アルテグラは比較的高価なグループセットと見なされています。😹.
i am lazy. finish line 1-step, lubes as it cleans
👍😺
i guantiiiiiii
👍👍
케이블 장력조정이 어려워서 . . .
모든 리어 와셔에 이 옵션이 있는 것은 아닙니다. 언제든지 시프터 핸들의 텐셔너를 사용할 수 있습니다.
Spojka řetězu asi nic neříká:))
Děkujeme za vaši zpětnou vazbu! 😘
i have 25years old bike never replace them ,working as new :)
Previously, the components were made of higher quality
Só do I .
😘
@@GoodBicycle yes true was better quality i have also hubs after 30 years perfect condition this is crazy
wow
You need a thicker oil than that, its not a sewing machine
All methods are good, but it's the result that counts.
Where are your gloves?
on the shelf.)
Why let it get in that state in the first place
to have a job at a bike shop)))
old North Italiano cyclist here, who THANKS you for creating the ONLY really-helpful cycling tips on YT. Ok, ok...maybe having some bikini-wearing babe would add some pizzaz :-) subbed/liked!!
thank you for your extraordinary review!!! )))
Share this video with your friends, it will help the development of the channel! 📈😘
For the love of god, invest in an ultra-bath.
))) will be soon))))) but the question, can the ultrasonic bath really remove a hardened piece of grease with dust ?
Не варто змащувати осі паралелограма.
Дякуємо за пораду!😽
You didn't even clean and regrease the main spring, like where the clutch sits in the mtb versions 🤷
In this case, there was no such task
Keine Drahtbürste und bitte Handschuhe
vielen Dank für Ihren Kommentar! 😘
5:25 your hands were so dirty when handling the internal parts of jockey wheel ceramic bushes and we really pity for the owner who bought this new jockey wheels
Thank you for your feedback! 😘
try to use gloves 🧤 bro while your cleaning.
If you don’t mind thanks
yeah, I was eating using gloves.
but gloves are much harder to work with.
but i don't know how acceptable it is for a viewer to watch a bike maintenance video without gloves ?
I'm used to it.)
please tell me, as a viewer, do you want to see a gloved or gloveless hand ?
i don't have any problem if your hand is gloved or glovless i like the way your working but i told to wear gloves because gloves will protect your hand from dirt.
If your not comfortable with gloves it’s okay no problem 😉
👌
70 years old here, been working a long time without gloves, I wash my hands a lot, gloves just don’t work for me
Don't try this by your own. Get to master. Guy killing derailleur instead repairing. Removing all grease is not good way to prolong exploitation period.
Thank you for your feedback! 😘
I am doing my three bikes from 12 years. Nothing happens yet. I save money and time. If you cant do it by yourself dont tell other people what they should or sholudnt.
@@piotrn9450- Yes!🙂 It's a mucky bicycle, not a £235,000 platinum wristwatch! I think the guy warning others not to try servicing the derailleur didn't spend his childhood taking things apart to see how they worked. I did, and I bet that you did, too.
It's good to get your hands dirty from time to time. You can learn all sorts of new skills; the key thing is to record exactly what went where and which way round it went. I used to use paper and pencil, but it's much easier now when you can photograph and video everything with a tablet or mobile phone camera.
It's sad that so many of today's devices are apparently built to be thrown away rather than repaired. It's creating a whole generation of people unable to look after themselves, and too scared to try.
Прекрасненько .
😸