I like your way to start with a specific topic but you explain everything that is related to this topic . VERY useful videos , even for my CDI 270 engine . THANK YOU VERY MUCH and greetings from Italy
w211 2.2 cdi 2008 . car has no power, won’t go up to 3000 revs. looks like turbo dsnt work . i tred many motkshop but they cant find problem . i know many people whose strugles by this problem . have you any idea ? 🥺
Hey, thanks for the video, would you mind to share the link or reference of this case with O rings for buying it? I need several (like for the oil separator, MAF sensor among others) Thanks a lot, my MB is getting better each day thanks to your videos :D
@@energyionut1318 Yes, and I tried to reply you with the links and vendor details but after clicking on replay, my comment disappears and I do not know why.....
Hi! Very nice videos, man, thank you very much! I'm driving the same W210 220 CDI and I have an issue with the car not accelerating as it should (still accelerating, but I think it can do a bit better) and the engine starts to wroom a lot and it gets pretty loud after 130 km/h or 2600-700 rpm. I'm suspecting air or turbo issue, does it make sense? Thanks!
@@annatj yes, there were 3 problems actually, blown intercooler, blown intake manifold and bad EGR. Intercooler and intake manifold were replaced, EGR software disabled.
@@muchfitter1124 damn, that sounds bad. I don't wanna know how much you paid for all of that lol. I got it checked and it was only my MAF sensor, which got replaced. Very happy that my 220 CDI is now back to normal!
Hy I've got a C220cdi w202 and it's starts after a lot of starting and after 1-2 minute idleing it dies like no more fuel inside. It has white smoke and a lot of bubbles in the fuel system before the filter from the tank already.
Hi, I have 0m613 and a problem with limp mode. I have discovered that if I unplug the maf sensor I get boost back albeit about 70% but if I plug it back in it goes into limp mode. I have replaced the maf sensor and the air temperature sensor , installed a egr shunt but still, it only works when the maf is unplugged...🤔 🤦♂️🤷♂️ Any input would be greatly appreciated 🙏
Hi, thank you so much for your video. Could tell me which is the OBD II scaner that you have used in this video? I have a MB Clsse E 270 cdi w210 216 Thank you . .
Hi, thanks for your video. Your diagnostic tools and his adaptater work with all system of car (abs, airbag..) or just with the motor sensor ? Thanks for reply, best regards, GL, w210 270 cdi
Hi man and you do realy good job 👍 I have question.. why the steering wheel is hard when I drive but not when the car is stop and the engine running Benz 2004 class e e 220 cdi and tnx
Air intake temperature sensor on my car has the wires cut, runs and pulls great but what could be the simptoms without a workint AIT senzor working properly?
Hello How to check MAF and IAT sensors? How to be sure that sensors work properly? I make mistake and I cleaned up MAF and IAT sensors in my car by the universal clean fluid. In addition I don't posses OBD2 diagnostic unit.
Helo, i want to know which is the voltage of mass air sensor when the car is in idle, and when the car is acelerated to 2500rpm, please?. I think that my mass air sensor not works good. Thak you
Helo my mercedes w210 e 220cdi 1998 year have problem The turbo does not open in 2.5k rpm as it sould. And wen it reach 120kmh at 3 rpm stops bosend go more!! Wat cant it be?
Hello. my car e 220 cdi om 611 motor.143 ps. When driving with my car, the gas suddenly cuts off and does not exceed 2000 cycles. kick down doesn't work either. I'm stopping the car. it gets better after running it again. It does it again after 5/10 km. We connect it to the computer, the fault does not appear. where is the problem
Hello, first of all thanks for your video. I have a problem on my 320 cdi 2001. When I drive my car to long way, after a certain time the turbo is not working. I mean, the solenoid valve which is on the turbo is stopping the working (vacuum). When I stop and run the engine again it gets fine but after a while it gets same problem again. It is not doing it in city drive, and if it is cold outside I am not facing with this problem when I'm driving to long way. Do you think that it can do this problem because of the maf and iat sensor? Thanks.
@@doit_vehicles I already check the vacuum line there is no vacuum leak I already change the accelerator pedal sensor and the selenoid valve on turbo and I still could not find the problem.
I have a problem on a W203 220 CDI with black smoke even on normal acceleration 0-50 km/h, car has full power I believe, doesn't feel slow but I don't know what the cause of the black smoke is, could it be the injectors or the sensors? The injectors had the o-rings replaced a while ago and the car is throwing 0 errors on diagnostics. Additional info is that the car sometimes idles weirdly when its on operating temperature, it loses rpm for one moment and a puff of black smoke comes out but then goes to normal and does that a couple of times when standing still, not always though. Any help would be appreciated.
@@doit_vehicles After 7 months the issue has most likely been resolved. A punctured intercooler with both its hoses leading to and from the intercooler have been diagnosed. They have been replaced and so far I did not have any major black smoking. The random rpm loss is not as bad anymore and I have noticed that it only happens once the engine cooling fan is running but it is not spitting out black smoke anymore. Injectors have been checked but were found to be within spec.
If it's the power loss problem of 3000 rpm than check the mass airflow sensor, change it if necessary. Also clean the egr valve, check the turbo and intercooler hose for cracks and clean the other sensors as in the video. Don't clean with brake cleaner, but with electrical cleaner or mass airflow sensor if you can find. If this doesn't fix the power loss problem, it could be the inlet manifold who is full of carbon build up.
Hi thank you for the explanation. I did an electric diagnose and the error that appears is problems with the main heating valve system. Could that be my problem? I try to find were this valve is in my car without results. The only think that I have done before this problem Is that I fix one pipe rear part of the engine these pipe is connected under the hood before the dashboard.
@@doit_vehicles No I don't have. Could you help me regarding the circulation of the coolant that goes to the inside of the car, if it's possible the sistem creates air inside of the pipes and give me this problem? And is it normal that after switch of the car if I open the tank cup it's coming out air. Thanks
Sir my car e 270 doesnt rev upto 3000 rpm when i accelerate to full gas pedel what can be the problem . The mechanic told me to change the gear oil and transmisson filter i changed but then also i couldnt see and response. Again he told me that turbo is week and the TCM is not sending any response. Can u plz helpe out what can be the problem. The car is running quite good but when i have the gas pedel to the ground it doesnt go to that speed at a glance
Any codes ? Small chance to be a transmission problem and the turbo has nothing to do with rpms on this engine ( unless in some rare situations) Start by checking the fuel pressure with a scan tool
Usually for most Merc diesel cars, If you experience that problem, then you have air escaping. The Air flow from the turbo must be tight for the boost to take effect, if there is a leak anywhere, it wont boost and will read a code of a faulty turbo. Go through all the pipe connectors and check for any leaks or broken seals.
Check the mass airflow sensor, change it if necessary. Also clean the egr valve, check the turbo and intercooler hose for cracks and clean the other sensors as in the video. Don't clean with brake cleaner, but with electrical cleaner or mass airflow sensor if you can find. If this doesn't fix the power loss problem, it could be the inlet manifold who is full of carbon build up.
w210 Vaccum Lines : th-cam.com/video/188ipUjcnl8/w-d-xo.html
Really good video, I've learned more in 5 minutes than many youtubers can teach in 1 hour!
I am glad it helped!
I like your way to start with a specific topic but you explain everything that is related to this topic . VERY useful videos , even for my CDI 270 engine . THANK YOU VERY MUCH and greetings from Italy
Hei ! I am glad u liked it
As always very simple and helpful. Thank you!
Very informative. Thanks.
Thank you
Good advice, and some simple DIY jobs to save money, well done.
Tnx bro i finding my maf sensors 🎉
I appreciate. VERY GOOD.I WANT TO SEE HOW YOU REMOVE AUTOMATIC TRANSMISION.THANK YOU.PLEASE.
w211 2.2 cdi 2008 . car has no power, won’t go up to 3000 revs. looks like turbo dsnt work . i tred many motkshop but they cant find problem . i know many people whose strugles by this problem . have you any idea ? 🥺
Great video. Very usefull for current owners of that car. How was the engine runing after that cleaning? Power was back steady?
Good job 👍, thanks
Thanks. HELLO from BAKU...
Hello !
thanks for good video.
Hey, thanks for the video, would you mind to share the link or reference of this case with O rings for buying it? I need several (like for the oil separator, MAF sensor among others)
Thanks a lot, my MB is getting better each day thanks to your videos :D
Hi, did you found the oring set?
@@energyionut1318 Yes, and I tried to reply you with the links and vendor details but after clicking on replay, my comment disappears and I do not know why.....
super. thanks
Welcome
Hi! Very nice videos, man, thank you very much! I'm driving the same W210 220 CDI and I have an issue with the car not accelerating as it should (still accelerating, but I think it can do a bit better) and the engine starts to wroom a lot and it gets pretty loud after 130 km/h or 2600-700 rpm. I'm suspecting air or turbo issue, does it make sense? Thanks!
Did you find the issue? I'm having the same problem right now :(
@@annatj yes, there were 3 problems actually, blown intercooler, blown intake manifold and bad EGR. Intercooler and intake manifold were replaced, EGR software disabled.
@@muchfitter1124 damn, that sounds bad. I don't wanna know how much you paid for all of that lol. I got it checked and it was only my MAF sensor, which got replaced. Very happy that my 220 CDI is now back to normal!
@@annatj Good! Everything was around 350 EUR
@@muchfitter1124Where do you live? The intake manifold only cost about €300
Thanks men
You're welcome!
Bonjour
pourquoi la durite qui va à la vanne EGR est coupée ??
Podrían ponerlo en Español por favor... muchísimas gracias
very nice
o ring box super
Hy I've got a C220cdi w202 and it's starts after a lot of starting and after 1-2 minute idleing it dies like no more fuel inside. It has white smoke and a lot of bubbles in the fuel system before the filter from the tank already.
Thx ❤❤❤
Hi, I have 0m613 and a problem with limp mode. I have discovered that if I unplug the maf sensor I get boost back albeit about 70% but if I plug it back in it goes into limp mode. I have replaced the maf sensor and the air temperature sensor , installed a egr shunt but still, it only works when the maf is unplugged...🤔 🤦♂️🤷♂️ Any input would be greatly appreciated 🙏
Thank you very much
You are welcome
Please can I contact you directly ? I need your help
Hi, thank you so much for your video. Could tell me which is the OBD II scaner that you have used in this video? I have a MB Clsse E 270 cdi w210 216
Thank you . .
Hi, thanks for your video. Your diagnostic tools and his adaptater work with all system of car (abs, airbag..) or just with the motor sensor ? Thanks for reply, best regards, GL, w210 270 cdi
not the bluedriver , at the bets you might be able to read some codes on those modules
Hey, I had exactly same way sensors. Thank you. Shouldn't after IAT and the other sensor require agr cleaning if oiled?
Hi man and you do realy good job 👍
I have question.. why the steering wheel is hard when I drive but not when the car is stop and the engine running Benz 2004 class e e 220 cdi and tnx
hard to tell without an inspection ..
Air intake temperature sensor on my car has the wires cut, runs and pulls great but what could be the simptoms without a workint AIT senzor working properly?
Hello
How to check MAF and IAT sensors? How to be sure that sensors work properly?
I make mistake and I cleaned up MAF and IAT sensors in my car by the universal clean fluid. In addition I don't posses OBD2 diagnostic unit.
Hi, what size oring did you end fitting on that sensor? Thank you so much for this video so complete!
Hey, 4x2mm o-ring fits perfectly.
Tachometer dluctuate at idle very little, can you give me an idea whats wrong please 🙏!?
Thank,s
Hi I have a problem with my 290td , that the turbo works , but when we do kilometres he disable the turbo , I think it is maf
Hello , i have bougth a obd cable similar to that one, but without sucess on a w210 year 2000 220cdi,. Did it work with you??
Helo, i want to know which is the voltage of mass air sensor when the car is in idle, and when the car is acelerated to 2500rpm, please?.
I think that my mass air sensor not works good.
Thak you
Where is intake temperature sensor 2 in w211 220cdi?
Thanks
Can i use brake cleaner spray for this?
Does the 611 have swirl flaps like the 646 🤔
my car doesnt more than 2000rpm in the third gear even if i press the pedal all the way.What shkuld i do?
Hi, which size is the o-ring for the last sensor?
Helo my mercedes w210 e 220cdi 1998 year have problem
The turbo does not open in 2.5k rpm as it sould. And wen it reach 120kmh at 3 rpm stops bosend go more!!
Wat cant it be?
Checkt the turbo is ok changet the Maf sensor but still dosnt acelerete well the turbo wont open!!
Hello. my car e 220 cdi om 611 motor.143 ps.
When driving with my car, the gas suddenly cuts off and does not exceed 2000 cycles. kick down doesn't work either. I'm stopping the car. it gets better after running it again. It does it again after 5/10 km. We connect it to the computer, the fault does not appear. where is the problem
sounds like a high pressure fuel pump
Hello, first of all thanks for your video. I have a problem on my 320 cdi 2001. When I drive my car to long way, after a certain time the turbo is not working. I mean, the solenoid valve which is on the turbo is stopping the working (vacuum). When I stop and run the engine again it gets fine but after a while it gets same problem again. It is not doing it in city drive, and if it is cold outside I am not facing with this problem when I'm driving to long way. Do you think that it can do this problem because of the maf and iat sensor? Thanks.
Does not look like it . Check the vaccum line - it has to be free of cracks and not soft enough to colapse under the vaccum.
@@doit_vehicles I already check the vacuum line there is no vacuum leak I already change the accelerator pedal sensor and the selenoid valve on turbo and I still could not find the problem.
@@emrebilgic7321Did you find out?
in my w211 regim stoped in 30 tr/min is this the problem !!!
I have a problem on a W203 220 CDI with black smoke even on normal acceleration 0-50 km/h, car has full power I believe, doesn't feel slow but I don't know what the cause of the black smoke is, could it be the injectors or the sensors? The injectors had the o-rings replaced a while ago and the car is throwing 0 errors on diagnostics. Additional info is that the car sometimes idles weirdly when its on operating temperature, it loses rpm for one moment and a puff of black smoke comes out but then goes to normal and does that a couple of times when standing still, not always though. Any help would be appreciated.
Reading the live data will help to send the diagnose on the right direction . From what you said it could be the injectors spraying too much fuel
@@doit_vehicles Thanks for your reply, I will try to look into it.
@@doit_vehicles After 7 months the issue has most likely been resolved. A punctured intercooler with both its hoses leading to and from the intercooler have been diagnosed.
They have been replaced and so far I did not have any major black smoking. The random rpm loss is not as bad anymore and I have noticed that it only happens once the engine cooling fan is running but it is not spitting out black smoke anymore. Injectors have been checked but were found to be within spec.
Hi man are you from sweden?
My car is 220cdi w203 and have a oroblem, can not take more than 2000 rpm when drive, is it can be the mass flow air sensor? Thank you
short answer , no
@@doit_vehicles whera do I looking for that problem, the star diagnostic do not show problem? Thank you
If it's the power loss problem of 3000 rpm than check the mass airflow sensor, change it if necessary. Also clean the egr valve, check the turbo and intercooler hose for cracks and clean the other sensors as in the video. Don't clean with brake cleaner, but with electrical cleaner or mass airflow sensor if you can find. If this doesn't fix the power loss problem, it could be the inlet manifold who is full of carbon build up.
I've got problems with heating inside of myne w203 c220 cdi, wat can it be? The ventilation is OK but no hot air camping out.
is the car getting to the operating temperature ? how is the coolant quality ? Do a heater core flush
Hi thank you for the explanation. I did an electric diagnose and the error that appears is problems with the main heating valve system. Could that be my problem? I try to find were this valve is in my car without results. The only think that I have done before this problem Is that I fix one pipe rear part of the engine these pipe is connected under the hood before the dashboard.
@@ledianhalili3805 Does it have a coolant heater booster ? I made a video about that
@@doit_vehicles No I don't have. Could you help me regarding the circulation of the coolant that goes to the inside of the car, if it's possible the sistem creates air inside of the pipes and give me this problem? And is it normal that after switch of the car if I open the tank cup it's coming out air. Thanks
Did u have codes or not?
Sir my car e 270 doesnt rev upto 3000 rpm when i accelerate to full gas pedel what can be the problem . The mechanic told me to change the gear oil and transmisson filter i changed but then also i couldnt see and response. Again he told me that turbo is week and the TCM is not sending any response. Can u plz helpe out what can be the problem. The car is running quite good but when i have the gas pedel to the ground it doesnt go to that speed at a glance
Any codes ? Small chance to be a transmission problem and the turbo has nothing to do with rpms on this engine ( unless in some rare situations) Start by checking the fuel pressure with a scan tool
Usually for most Merc diesel cars, If you experience that problem, then you have air escaping. The Air flow from the turbo must be tight for the boost to take effect, if there is a leak anywhere, it wont boost and will read a code of a faulty turbo. Go through all the pipe connectors and check for any leaks or broken seals.
Thank for your replies😊
@@doit_vehicles sir the problem has been solved it was some wiring problems which was causing lot of problem
@@dumisanemasinga8320 thank u sir this information was quiet relaible
which one is the atmospheric valve sensor ?
Search for " altitude pressure sensor w203 c200 "
My engine vibrates a lot
J'ai une voiture avec une mauvaise réponse de l'accélérateur à 80 vitesses lorsque le moteur s'arrête et que le redémarrage est de nouveau au pouvoir
MERCEDES E 220 W 211 2003 CDI
TOUS PISE A NETTOIEE COLECTER ADMISION TURBO VALVE GER OILE MOTER OILE BOITE VITES ET FILTER MET PANNE RESTE
Sometimes my e220 cant rev over 3000 rpm
When i restart the engine
The problem is gone
But after time he make it again
Can somebody help me
Did you find out?
Check the mass airflow sensor, change it if necessary. Also clean the egr valve, check the turbo and intercooler hose for cracks and clean the other sensors as in the video. Don't clean with brake cleaner, but with electrical cleaner or mass airflow sensor if you can find. If this doesn't fix the power loss problem, it could be the inlet manifold who is full of carbon build up.