this video actually caught the attention of MJJC and they've since sent me some of their soap which I've tested and have had great results with. One of their V3.0 Foam Cannons will be arriving in the mail soon, and I'm looking forward to comparing that to the Sunjoe foam gun I am currently using. Thanks for watching 👍🏻
For people who have no access to a pressure washer, it's not that bad considering it's probably running about 4 PSI or less. The problem is it's really not going to help a lot to loosen off dirt and debris prior to a contact wash. You're better off getting a hand pump foamer or sprayer and pre-washing that way.
Totally agree, those garden hose foam guns are trash, the ik pump sprayers are your best bet, but even the best one of those at a bigger sz will run you the same as a cheap electric pressure washer.
Americans want to cake their car in so much soap foam that it makes them look like theyre burying it in 5 ft of snow after a blizzard. The rest of the world is hardly as picky.
This guy never read the instructions, plus there is a metering gauge on the foam gun. My Bunny K Foam Gun works great. I have used for over 5 years. Add 2-3 Oz of car wash shampoo, then water to the container, shake, attach, and foam whatever u want.
Agreed. This is how is use it. Gives a good covering. This item shouldn't be compared to a dedicated foam applicator. Does a fine job of getting soapy water mixture on to the car.
Bunny k? Is that on Amazon? I can’t find it anywhere. What did the guy on the video do wrong exactly? He added the right amount of soap then a decent amount of water…. Are there any good Amazon foam guns and anything I need to know?
There's normally a knob on foam connons, allowing you to choose the level of foam concentration that you want. Try adjusting it and see the results for yourself.
The problem is that this is a cheapo foam sprayer attached to a garden hose. There’s just not enough pressure to create the thick foam made with pressure washer foam guns. Rotating a knob won’t break physics to magically make thicker foam
For me its not all about the suds its about if it sprays a decent amount of soap and not just water you gotta think about it some beginners like me would definitely use this product
The foam cannon is designed to produce foam by high pressure. There’s practically no pressure off a garden hose. That was not a good test at all of it’s capability.
How fcking much foam do you want? Its okay for 17 dollars. A guy who can afford a good set will know that 17 dollars is on the cheap side, so he will not expect much.
You’re supposed to mix soap and water to your desired ratio. I’ve tried a few different formulas with this garden-hose driven gun and nothing works as well as a foam gun designed to work with a pressure washer.
filled it up with water halfway, and this was the result. You can get decent, thicker foam with the jar half full with water and around 250ml of soap, but it quickly adds up and becomes a waste
no, a good foam cannon is $20 and then $10 in upgraded parts then you have as good as a $100 cannnon; they're ALL just a lance with a few replaceable parts
Maybe because you hooked it up to a garden hose and not a pressure washer🤦🏽🤷🏽♂️ I'm pretty sure these cannons rely on a higher pressure than a garden hose can provide....
🖕 scAmazon.
Gets yourself a proper foam cannon (i.e., Ryobi pressure washer, uberflex hose, MJJC Foam Cannon, and Adam's mega foam.
this video actually caught the attention of MJJC and they've since sent me some of their soap which I've tested and have had great results with. One of their V3.0 Foam Cannons will be arriving in the mail soon, and I'm looking forward to comparing that to the Sunjoe foam gun I am currently using. Thanks for watching 👍🏻
Aint no way i see this right after buying the product 💀💀💀
Cancel fam 😂
You need a pressure washer for any foam cannon to have a good spray on
My aunt got me one I don’t got the heart to tell her it doesn’t work that good😭
Same bruh
Don’t panic if you have a pressure washer it works just fine.
You forgot to add water to the soap 💀
Fr
For people who have no access to a pressure washer, it's not that bad considering it's probably running about 4 PSI or less. The problem is it's really not going to help a lot to loosen off dirt and debris prior to a contact wash. You're better off getting a hand pump foamer or sprayer and pre-washing that way.
Totally agree, those garden hose foam guns are trash, the ik pump sprayers are your best bet, but even the best one of those at a bigger sz will run you the same as a cheap electric pressure washer.
I'm using both
Is working....you wet the car with water and soap....you dont need a snow cover car....thats just enough for what it do
That’s what I’m saying ! 😂
well that and if the car is coated all it needs is a little lubricant and your chillin
Americans want to cake their car in so much soap foam that it makes them look like theyre burying it in 5 ft of snow after a blizzard. The rest of the world is hardly as picky.
Then u dont know how foam works
You paid 17 bucks and you complain? Haven't you heard of the phrase you get what you paid for!!!!!
This guy never read the instructions, plus there is a metering gauge on the foam gun. My Bunny K Foam Gun works great. I have used for over 5 years. Add 2-3 Oz of car wash shampoo, then water to the container, shake, attach, and foam whatever u want.
Agreed.
This is how is use it. Gives a good covering. This item shouldn't be compared to a dedicated foam applicator. Does a fine job of getting soapy water mixture on to the car.
Bunny k? Is that on Amazon? I can’t find it anywhere. What did the guy on the video do wrong exactly? He added the right amount of soap then a decent amount of water…. Are there any good Amazon foam guns and anything I need to know?
That's a foam gun not a foam cannon. Cannons go with pressure washers. Pretty much all garden hose powered guns are like this.
I think that’s enough soap to clean a car. You really don’t need to much soap 😂
I use one of these when Im lazy to set up the pressure washer I use Maguires gold for it so I put a lot and Adams shampoo with my foam cannon.
I have one and its almost comparable to a foam cannon idk what you did wrong maybe over diluted the soap or didnt adjust the settings or something
I just bought one got it today let’s see how it works
@@deniserivera6856 how you came out in the end ? Nice or Not ? FOR THE PRICE ?
There's normally a knob on foam connons, allowing you to choose the level of foam concentration that you want. Try adjusting it and see the results for yourself.
The problem is that this is a cheapo foam sprayer attached to a garden hose. There’s just not enough pressure to create the thick foam made with pressure washer foam guns. Rotating a knob won’t break physics to magically make thicker foam
Looks fine to me
For me its not all about the suds its about if it sprays a decent amount of soap and not just water you gotta think about it some beginners like me would definitely use this product
The foam cannon is designed to produce foam by high pressure. There’s practically no pressure off a garden hose. That was not a good test at all of it’s capability.
this is intended to be used on a hose.
You need a pressure washer to
Get good foam
Actions.
How fcking much foam do you want? Its okay for 17 dollars. A guy who can afford a good set will know that 17 dollars is on the cheap side, so he will not expect much.
Haven't bought one yet. But all the foam "guns" I've seen do this. If you want better result try a foam cannon that hooks to a pressure washer...?
Are u supposed to add the soap and water in the container, or just the soap and let the water come through the hose. Iv seen it done differently
You’re supposed to mix soap and water to your desired ratio. I’ve tried a few different formulas with this garden-hose driven gun and nothing works as well as a foam gun designed to work with a pressure washer.
..it’s because it’s a hose, not a pressure washer. They work much better on those. With a hose it’s just soapy water
Aren't you supposed to mix water with the soap in the reservoir?
filled it up with water halfway, and this was the result. You can get decent, thicker foam with the jar half full with water and around 250ml of soap, but it quickly adds up and becomes a waste
@@boltsandbanter understood. Thanks for the response
You need pressure.
Thanks a lot, you just save me $17. I was getting curious too and unfortunately sometimes my curiosity gets the better of me. Cheers
Glad I could help! Thanks for watching 🙌🏻
How did you connect it to your garden hose please ?
It comes with a quick connect fitting. Otherwise most come with the standard screw type
Frl im loss
I bought a foam canon from Ross. and does a better job than that one and plus it cost $13.
That’s plenty of soap, especially with a bucket of soapy water
Hook it up to your power washer and it will do whats suppose to.
What adapter is on your hose
Looks like it does the job to me.
Of course it was a waste of soap. You're supposed to fill it with water.
How to your tip connect
I can’t get my nozzle to stay in the end of it
Agreed,this is trash. And I add water.
Hello I’m a professional detailer, it’s because that foam cannon itself it’s horrible a good foam cannon is around 60$
Do you recommend any specific ones?
@@cricketer1 a good one non professional would be a chemical guys oken
no, a good foam cannon is $20 and then $10 in upgraded parts then you have as good as a $100 cannnon; they're ALL just a lance with a few replaceable parts
Ummmn ... That's a foam gun.... Foam cannon is a whole different beast
Bro, you forgot to add water and you’re supposed to use a pressure washer
So you need a proper pressure washer
I'm from the future and you didn't put any water in there lol
man what the fuck i have this and when i hook it upcto my hose it doesnt use any of the stores water it only uses the hose water wtf am i doin wrong
Hello, the new MJJC Snow Foam Shampoo have released,may I know if you like to review it? Thanks!
I'll take a foam cannon to try😊 heard yall were the best, but $90 is crazy for something I'd use for twice a month 5 min at a time.
@@ballzdeep1017 Well received,may I have your email? Thanks in advance!
Saw your DM on IG and replied there, thanks!
You need to fill it up with water to work
Maybe because you hooked it up to a garden hose and not a pressure washer🤦🏽🤷🏽♂️ I'm pretty sure these cannons rely on a higher pressure than a garden hose can provide....
Great point lol. They have specific ones for garden hoses but they don't work well. Most of the cannons need a pressure washer
Maybe you didn't use enough soap.
Nice car
Only legends know the car 🤓
Foam gun is for a hose, foam cannon is for a pressure washer
That’s enough soap, you don’t need to smother your vehicle
U bought the wrong one. You need the one that attaches to a pressure washer
i like what i saw in this video. i had the end break off mine way to easy.
This is mostly for washing a moped imo
put more soap then the soap line and i guaranty you gonna foam your car much more then this
Bro did NOT put enough soap
I have one
You forgot to add water and stir it.
For being cheap that's what u get
First you didn’t add enough soap
Second you need to shack it
Washing that car is a waste of time😂
Foam gun
Toyota mark ||
Add water haha 😂 then try again
Flop😂
Next-day delivery?