See part 2 of 3 of my kallax hack and modification videos, an inexpensive vinyl record back-spacers for a Kallax unit. th-cam.com/video/24H1OtaGnlw/w-d-xo.html
Hello TG, Can you tell me please the exact dimension for the supports you placed underneath shelves? Also, besides the material you used, any other suggestions for other material? Thanks
I bought a couple of sheets of pre-cut particle/press board that were 6mm x 30.5cm x 122cm (1/4inch x 1foot x 4feet) and then measured each shelf and cut the piece to fit. After a year of holding records each shelf was at a slightly different height, they were around 33.6cm (13.25 inches) but every shelf varied by a few millimeters. For alternate materials I am guessing a 1/4 inch sheet of plywood should work at well, I went with the particle board as it was the cheapest thing I could find at the store.
Difficult since by design only way to play them. I keep digital versions of most of my albums on a NAS for the times I don't want to keep getting up to change records.
@@TrippinGnome thanks, and sorry should have been more specific, pulling them in and out of the shelf cubes always feels really clumsy, like there has to be a better way, maybe shelves that slide out where we can flip trough them similar to crate digging, but i can also see how that can be dangerous if all shelves where to be pulled out at the same time, it would require some really strong anchoring
@@mario312 I've seen 7" 45's put in flip like racks inside kallax but agree the 12" lp albums would be problem with their weight. I have seen ikea eket shelves turned on side to make a flip cabinet but they do not store much. Here is sample I found on Redit. www.reddit.com/r/vinyl/comments/ahve9b/if_you_turn_ikea_eket_shelves_on_their_back_it/ Would work only if you don't have many records. Or to keep recent purchases easily accessible.
Consider also maybe filling cubes only 3/4 or just not filled complete so as to leave room so you can easily move records side to side and pull out easier - just a thought, good luck!
See part 2 of 3 of my kallax hack and modification videos, an inexpensive vinyl record back-spacers for a Kallax unit. th-cam.com/video/24H1OtaGnlw/w-d-xo.html
Nice solution, Mr.Gnome 👍
Thanks, minor water issue in the basement cause a move of all cabinets and discovery things were getting loose & shaky in my ikea storage world 😁
Hello TG,
Can you tell me please the exact dimension for the supports you placed underneath shelves? Also, besides the material you used, any other suggestions for other material? Thanks
I bought a couple of sheets of pre-cut particle/press board that were 6mm x 30.5cm x 122cm (1/4inch x 1foot x 4feet) and then measured each shelf and cut the piece to fit.
After a year of holding records each shelf was at a slightly different height, they were around 33.6cm (13.25 inches) but every shelf varied by a few millimeters.
For alternate materials I am guessing a 1/4 inch sheet of plywood should work at well, I went with the particle board as it was the cheapest thing I could find at the store.
@@TrippinGnome ok thanks TG - I’ll be heading to Lowe’s to get MDF board and do the same 🤞🏻
what i find deeply annoying is pulling records in and out, any hack for that, been trying to figure out how to ease that pain
Difficult since by design only way to play them.
I keep digital versions of most of my albums on a NAS for the times I don't want to keep getting up to change records.
@@TrippinGnome thanks, and sorry should have been more specific, pulling them in and out of the shelf cubes always feels really clumsy, like there has to be a better way, maybe shelves that slide out where we can flip trough them similar to crate digging, but i can also see how that can be dangerous if all shelves where to be pulled out at the same time, it would require some really strong anchoring
@@mario312 I've seen 7" 45's put in flip like racks inside kallax but agree the 12" lp albums would be problem with their weight.
I have seen ikea eket shelves turned on side to make a flip cabinet but they do not store much. Here is sample I found on Redit. www.reddit.com/r/vinyl/comments/ahve9b/if_you_turn_ikea_eket_shelves_on_their_back_it/
Would work only if you don't have many records. Or to keep recent purchases easily accessible.
@@TrippinGnome that looks like a fantastic idea
Consider also maybe filling cubes only 3/4 or just not filled complete so as to leave room so you can easily move records side to side and pull out easier - just a thought, good luck!