Kevin on the Suzuki TC-100 the oil pump line adjustment ,the lines line up at full throttle. not closed like the Kawie. as per the Suzuki book just thought i would mention.
I'm rebuilding my TS400 and your videos have been a huge help! (I know not everything is 100% identical, but this definitely covered a lot of details the workshop manuals don't mention.)
Good morning Kevin I appreciate your videos. I have a 74 TC 100 rotary valve engine. I'm having a hard time finding the inner rotary valve seat maybe made out of cork. I got a new outer case with new cork in it. But the inner one as some type of gasket material not like the cayes that doesn't look like they have anything in between. Looking for a New Old stock or replacement any help
Hey buddy love the channel I’m having a hard time with a 72 Mt50 trail hopper. The oil pump seems to have gone bad. I don’t see it working. Any suggestions would be helpful THANKS keep rocking hard.
I just discovered your channel today. I watched few of your videos and they are great and informative. I recently got one of those bikes and found out oil pump wasn't used and it's premixed in the tank. What damage that it can have on the engine. I'm kinda scared now seeing this video. Is there any other videos that I can learn more about this oil pump and it's operation? Thank you in advance
@@2strokeguru thanks for the fast reply. Is there videos about this rotary valve in the channel. I got this bike as a gift and want to get this bike to a good condition. I live in a South Asian country and not many people know how to work on these and these are rare too. Thank you again.
Hey keven ! Really confused here… yestersay i was working on my oil pump after putting it all back together, i realized it was inverted like to oil was coming out of where initialy it is the tube that goes to the tank…. I dont understand how is this possible!?!? Kawasaki g4tr 1974
Hi Kevin, thanks for the great content. I have an Kawasaki f11 with a problematic oil pump. I have ordered another that I think will fit. Would premixing this model be ok? It injects into the cylinder head but also the crank.
I have a 1979 GT80 that I recently cleaned and kind of rebuilt the carburetor. I have no knowledge I just did the work off of your videos. Bike starts up immediately but goes to high rev. Have to shut it off at the kill switch. Any ideas ?
Lots of good info but using a drill to put screws in... Most people are going to do that and cross them ead and mess up. I know you're in a hurry and trying to make things go quicker but the average Joe is going to get wrong idea w drill
![BOWKYLION - วิงวอน (ex-change) [Official MV]](http://i.ytimg.com/vi/cLdnZWDaO-w/mqdefault.jpg)
Kevin on the Suzuki TC-100 the oil pump line adjustment ,the lines line up at full throttle. not closed like the Kawie. as per the Suzuki book just thought i would mention.
I'm rebuilding my TS400 and your videos have been a huge help! (I know not everything is 100% identical, but this definitely covered a lot of details the workshop manuals don't mention.)
Thank you i appreciate that
Thanks for the video! Very timely! Praying for you to get better
Thank you I appreciate that
Good morning Kevin I appreciate your videos. I have a 74 TC 100 rotary valve engine. I'm having a hard time finding the inner rotary valve seat maybe made out of cork. I got a new outer case with new cork in it. But the inner one as some type of gasket material not like the cayes that doesn't look like they have anything in between. Looking for a New Old stock or replacement any help
Have you checked out partzilla.com they have a complete parts brake down with part numbers and if they don't have it part number on eBay
Thanks for your input 😀
Thanks for the daily tips! Now I just need to get a copper gasket.😎
Welcome
Works better than a blade
I have one
A copper gasket
Hey buddy love the channel
I’m having a hard time with a 72 Mt50 trail hopper. The oil pump seems to have gone bad. I don’t see it working. Any suggestions would be helpful THANKS keep rocking hard.
Check the tank vent and make sure you have flow to the pump thank you for your support
I just discovered your channel today. I watched few of your videos and they are great and informative. I recently got one of those bikes and found out oil pump wasn't used and it's premixed in the tank. What damage that it can have on the engine. I'm kinda scared now seeing this video. Is there any other videos that I can learn more about this oil pump and it's operation?
Thank you in advance
Welcome to the channel not using the oil pump with damage the rotary valve and main bearing on right side it happens slowly
@@2strokeguru thanks for the fast reply. Is there videos about this rotary valve in the channel. I got this bike as a gift and want to get this bike to a good condition. I live in a South Asian country and not many people know how to work on these and these are rare too. Thank you again.
@@ballmantalk yes I have videos on rotary valve that's a nice gift
@@2strokeguru yes I found it and I am currently watching them. You are a life saver. thanks for the effort you put into these videos
@@ballmantalk very welcome happy to help
Very good, but above all instructive video. Are you planning any maintenance for the Suzuki 125 as well?
Yes I will be going through the entire bike
Hey keven ! Really confused here… yestersay i was working on my oil pump after putting it all back together, i realized it was inverted like to oil was coming out of where initialy it is the tube that goes to the tank…. I dont understand how is this possible!?!? Kawasaki g4tr 1974
Hi Kevin, thanks for the great content. I have an Kawasaki f11 with a problematic oil pump. I have ordered another that I think will fit. Would premixing this model be ok? It injects into the cylinder head but also the crank.
Rotary valve engines need oil pump
I have a 1979 GT80 that I recently cleaned and kind of rebuilt the carburetor. I have no knowledge I just did the work off of your videos. Bike starts up immediately but goes to high rev. Have to shut it off at the kill switch.
Any ideas ?
Make sure the slide is moving up and down and the cable is all the way down
Idle screw?
Hi Kevin! Does the throttle slide move at the same time as the oil pump cable lever? Or does one move before the other?
Yes they do
What is the size of clear hose you use in oil pump?
5mm
@@2strokeguru thank you
@@kevinmarasigan5267 welcome
Hey Kev
My pump won't pump I even have oil I'm the pump after opening up the bleeder screw
You have to have flow to the pump then open up to other line till oil comes out
Lots of good info but using a drill to put screws in... Most people are going to do that and cross them ead and mess up. I know you're in a hurry and trying to make things go quicker but the average Joe is going to get wrong idea w drill
I have been doing it 30years your right I will bring this up in my next video
I do it too but while I'm teaching my son, because he's watching... And I totally get taking them out