Vespa PX SIP LED Headlight Install
ฝัง
- เผยแพร่เมื่อ 27 ต.ค. 2024
- Installation of an LED headlight from SIP in a 2007 Vespa PX 125. This is a fairly straightforward install so long as your existing headlight runs off DC power, as mine did. For more on my Vespa PX 125, check out my EV conversion below:
• Vespa EV Conversion Pa...
Below is a link to the headlight on the SIP website:
www.sip-scoote...
Are you happy with the replacement headlight fixture ? When i did mine a year and a half ago it was a instant difference. It took me longer to decide what headlight replacement i wanted then it did to install it. How donyou feel about your new headlight?
I like it. It’s definitely brighter, but more importantly, it has a nice flat beam. I’ll probably like it even more in winter on my dark commute.
The SIP website shows the middle bar of the light lit up, I didn't see that in your video - just the lower half and the top half. Is there a reason for that?
Yes, I initially didn’t connect the middle bar as I was short a 12V feed. I wanted something that was independent of high and low beam. I connected it later and didn’t film it.
@@randomtasks ok. Will you be doing a video that shows the full installation?
I need to service the headset and replace the bearings anyway, so assuming I do that myself, I will make another video showing the final configuration of the light.
Thanks for the video
No problem!