Great video, thanks so much. it helped me a lot to carefully get access to all the wiring in the Dash console. A Rat or a Mouse has been living in my Dash and started to eat the wiring in there. My Sprint didn't start any more since some of the wiring of the ignition switch were eaten and some other wiring as well. Surprisingly my lights still work as well as my brake light and indicator lights. I made some short video of the eaten wiring. I can share the video with you if you like to see it. just let me know how I can share it with you. Many thanks again. Cheers Berto
Hi Roba, thank you so much for the illustrative video. I have a Vespa similar to the video and was able to install the LED headlight. It took me a longer than you but after it was placed the light looks awesome. Many blessings!
If I buy this for my vespa in Australia will it be ok? I can't seem to find anything suitable here in Aus. Do you also post here. Cheers and thanks for video
Hi there, I inherited the led H4 from the previous owner and installed it but my led diodes are single round ones (not double flat ones like yours) and the heat sinks fan out up and down, not left and right. Is mine older or something? Thx for your videos!
Help! I am having one heck of time getting the larger screw out of the bottom of the handle bar cover. They just don't want to seem to budge. I am on the verge of stripping them. Makes me think the factory superglued them in.
I would have liked to have seen the issues running into opening the side fasteners and pulling apart the top on a NEW Vespa. That would be helpful for those of us attempting to open the top of theirs for the first time.
Any recommendations for an LED kit for a MKI T5 as the ones I have tried are just not able to fit in, inside where the speedo goes makes it a very tight fit, these were the first use of H4 fittings on unique to the T5's square headlamp.
Thank you so much, always waiting for your video and I am happy because you update sustainably. Can you give us something about Modern Vespa LX 150 ie V3/ LX 150 i-get? I hope you can make it. Last but not least, Thank you, GBU
Will this fit the LX? Is there a difference in US vs EURO spec in headlights? I'm from Europe. Thanks. This is a great channel for Vespa info. Keep up the good work. (y)
i'm your fan and user of vespa from indonesia, what if the robot make a video, how to install the rear disc brake on vespa sprint using substitution of vespa gts, thx robot :)
Robot need to ask how to remove nd to fit back switch housing for primavera sprint same design with in this video? Coz i accidentally dropped mine now the lower part of left handle is opened half opened...
Great video, thanks so much. it helped me a lot to carefully get access to all the wiring in the Dash console. A Rat or a Mouse has been living in my Dash and started to eat the wiring in there. My Sprint didn't start any more since some of the wiring of the ignition switch were eaten and some other wiring as well. Surprisingly my lights still work as well as my brake light and indicator lights. I made some short video of the eaten wiring. I can share the video with you if you like to see it. just let me know how I can share it with you. Many thanks again. Cheers Berto
Hi Roba, thank you so much for the illustrative video. I have a Vespa similar to the video and was able to install the LED headlight. It took me a longer than you but after it was placed the light looks awesome. Many blessings!
If I buy this for my vespa in Australia will it be ok? I can't seem to find anything suitable here in Aus. Do you also post here. Cheers and thanks for video
Hi there, I inherited the led H4 from the previous owner and installed it but my led diodes are single round ones (not double flat ones like yours) and the heat sinks fan out up and down, not left and right. Is mine older or something? Thx for your videos!
Just installed this kit. Do I have to worry about the heat from those braids melting the wires in there?
I must have missed it. Did you ever say who actually makes the LEDs you're installing?
I love you dude. I just needed this vid in my life to save i maded by my self just because of you ❤❤❤❤
is there a difference between the handlebar of sprint and primavera?
Help! I am having one heck of time getting the larger screw out of the bottom of the handle bar cover. They just don't want to seem to budge. I am on the verge of stripping them. Makes me think the factory superglued them in.
I would have liked to have seen the issues running into opening the side fasteners and pulling apart the top on a NEW Vespa. That would be helpful for those of us attempting to open the top of theirs for the first time.
Any recommendations for an LED kit for a MKI T5 as the ones I have tried are just not able to fit in, inside where the speedo goes makes it a very tight fit, these were the first use of H4 fittings on unique to the T5's square headlamp.
Thank you so much, always waiting for your video and I am happy because you update sustainably. Can you give us something about Modern Vespa LX 150 ie V3/ LX 150 i-get? I hope you can make it. Last but not least, Thank you, GBU
Will this fit the LX? Is there a difference in US vs EURO spec in headlights? I'm from Europe. Thanks. This is a great channel for Vespa info. Keep up the good work. (y)
i'm your fan and user of vespa from indonesia, what if the robot make a video, how to install the rear disc brake on vespa sprint using substitution of vespa gts, thx robot :)
Can i aks my vespa sprint 2015 low beam doesn't work but high beam does is it a fuse issue or does the bulb need replacing ?
Robot need to ask how to remove nd to fit back switch housing for primavera sprint same design with in this video? Coz i accidentally dropped mine now the lower part of left handle is opened half opened...
How many lumens is this robot?
will this work on a 50cc vespa sprint?
What is the name of the lamp in the video
Please how can i get this LED headlight kit ?
scooterwest.com PART# LEDH4