Gotta give thanks man, awesome video. Got my vents working perfect and a bonus check engine light off, on an 03' Expedition with 300k+ miles that's an achievement.
Big Shout Out to you man i got a tune up and my vent were silent. Watched your video ran all the vacuum lines you suggested and Bingo i was back in the game. It gets hot in South Carolina.
I got to said you are that man I watch u r video for 2min figure out that leak went to autozone got a over size connector and know my ac blow normal thank you sir
Thanks for the video. I have a 2003 5.4 Expedition, there are 2 lines coming through the rubber gromet on the fire wall that are broken off. I can see the same section from your video that should be attached to one of them, no sign of where the other should continue. I will remove the battery and hopefully solve the mystery. I am getting the P0174 and P0406 codes, not sure if both related to this issue. Any thoughts?
If my ac is blowing in the back but not the front and it makes a loud grumbling noise after being on for a bit and can hear almost water swishing near passenger airbag how can i fix it? Its a 03 expedition
I still have problems with this. I had the hose you showed totally soft and ruined so I replaced that, and also another from the brake servo. It improved things, but now I have it intermittently failing, and I can't locate where else I have a leak/collapse.
Gotta give thanks man, awesome video. Got my vents working perfect and a bonus check engine light off, on an 03' Expedition with 300k+ miles that's an achievement.
Big Shout Out to you man i got a tune up and my vent were silent. Watched your video ran all the vacuum lines you suggested and Bingo i was back in the game. It gets hot in South Carolina.
I got to said you are that man I watch u r video for 2min figure out that leak went to autozone got a over size connector and know my ac blow normal thank you sir
Thank you for this video. We figured it out and the vents started blowing. Thanks
Great video! Appreciate the detail, thank you for taking the time!
Appreciate your content, sir!
Very nice. This helped. Got er done .
Thank you, that was the exact fix!
😎👍🏽GRACIAS, help me a lot 👏🏼👏🏼👏🏼
great info! thanks!!!
Thanks for the video. I have a 2003 5.4 Expedition, there are 2 lines coming through the rubber gromet on the fire wall that are broken off. I can see the same section from your video that should be attached to one of them, no sign of where the other should continue. I will remove the battery and hopefully solve the mystery. I am getting the P0174 and P0406 codes, not sure if both related to this issue. Any thoughts?
Yes it can def cause a 0174 there's a lot of plastic lines in that area by battery and tray
Great video what size was the hose
That’s the same question I have!!
@@dannseddinger3142 unless i missed it on the video, looking for the same answer.
Thank you it works
What size hose do I need to buy to fit that T fitting that you replaced?
I really don't know the auto parts store sells a assortment together usually in the help section
The Smallest Ones They Got
Is the front actuator the same for the distribution. When changing from low to high?
friend where the 3 elbows are located
Vaccuum lines? What size?
They have different sizes just depends on which one it is
If my ac is blowing in the back but not the front and it makes a loud grumbling noise after being on for a bit and can hear almost water swishing near passenger airbag how can i fix it? Its a 03 expedition
Sounds like .maybe your evaporator drain is clogged.
Hi, I have a 2003 expedition and I now have no ac! No air comes out at all now! I know I need a new front actuator as well!!! Help!!!!
I still have problems with this. I had the hose you showed totally soft and ruined so I replaced that, and also another from the brake servo. It improved things, but now I have it intermittently failing, and I can't locate where else I have a leak/collapse.
What size is the elbow? And what size is the hose?