Mitch, I gotta give ya credit where credit is due. Your videos helped me out sooo much. I wrecked my car a while back. Liability insurance and totally my fault =(. There was no quick transportation replacement, other then my road bicycle and learning the bus route to work. However, don't fret! An opportunity presented itself out of now where; a cheap opportunity at that! I was able to buy a 09 fly150 that wasn't running for $600 bucks. I was able to get it running like a champ very quickly from your videos. I want to Thank You!, for taking the time to make such great videos. Cheers man, Keep on keepin on!
Awsome vid again, man! Took my fly50 apart before winter, ofcourse i didnt take pics, snow is melting now... thanks! How about carb cleaning? Different on 150 vs 50, mine often does not wanna start or idle.
I have a 2008 piaggio fly 150. Can you please provide me some guidelines for replacing the rear brake cable? I started the front cover removal part. I have done everything until 2:15, however, the front cover doesn't come off still.
I have a piaggio fly 50 4T year 2009. After winter pause with some old gas in tank at cold start stayed 2 minute at idle but when try to accelerate dies. After a number of starts and removing old gas i can accelerate without dying and after some mileage on road (at warm engine) at idle stops immediantly and I can start it but only accelerated at max or else is not starting. You think there is a problem? Tracktion is good and i`ve order new air filter (it`s decomposing). Thank`s a lot and nice content!
Just bought a 50cc Fly 2t and I was stumped as to how to open that little compartment. As soon as you pushed the key barrel I could’ve punched myself 😂
hello my name is gabriele and I am writing from Italy. I have a problem, I can not open the small door that is behind the front shield, to understand what opens up by pushing the ignition key. I tried to push but nothing happens. Could you help me? Thank you and congratulations for your videos, hello
Hi guys someone tried to steal my bike. I've been told to take off the frame but I couldn't take off all the screws as the ignition is broken. I managed to take off the front screws but couldn't take off the back screws as the keys isn't turning and the front cabinet is blocked . could you tell me how to open the front cabinet please Thank-you
TOOLS I USED:
Phillips #2 screwdriver - amzn.to/2fgdZDL
Pre 2013 Piaggio Fly 150 videos: bit.ly/2fB7mdS
SHOP MY SCOOTER STUFF: amzn.to/2CbqQku
Mitch, I gotta give ya credit where credit is due. Your videos helped me out sooo much. I wrecked my car a while back. Liability insurance and totally my fault =(. There was no quick transportation replacement, other then my road bicycle and learning the bus route to work.
However, don't fret!
An opportunity presented itself out of now where; a cheap opportunity at that! I was able to buy a 09 fly150 that wasn't running for $600 bucks. I was able to get it running like a champ very quickly from your videos. I want to Thank You!, for taking the time to make such great videos.
Cheers man, Keep on keepin on!
Hey Mitch, i love your videos, you help me out heaps when im fixing my friends Piaggio Fly, thanks, keep up the good work.
Thanks Jude!
hey mitch
first i liked your video but i wasnt reall imprest about starting problem video, but i really like this video, thumbs up. keep it coming
Thank you, it was a usefull to understand an older one, piaggio fast rider probably from mid-late 90s
Awsome vid again, man! Took my fly50 apart before winter, ofcourse i didnt take pics, snow is melting now... thanks! How about carb cleaning? Different on 150 vs 50, mine often does not wanna start or idle.
I have a 2008 piaggio fly 150. Can you please provide me some guidelines for replacing the rear brake cable? I started the front cover removal part. I have done everything until 2:15, however, the front cover doesn't come off still.
Awesome video as usual Mitch!
I have a piaggio fly 50 4T year 2009. After winter pause with some old gas in tank at cold start stayed 2 minute at idle but when try to accelerate dies. After a number of starts and removing old gas i can accelerate without dying and after some mileage on road (at warm engine) at idle stops immediantly and I can start it but only accelerated at max or else is not starting. You think there is a problem? Tracktion is good and i`ve order new air filter (it`s decomposing). Thank`s a lot and nice content!
u are the best on piaggio!!! 5*
Just bought a 50cc Fly 2t and I was stumped as to how to open that little compartment.
As soon as you pushed the key barrel I could’ve punched myself 😂
Hi mitch could you show me how to change steering bearings on 125 fly 3v please thanks jason
Hi Mitch, where can I get running light/ blinkers? Ihad one of my lenses broken, also the little round ones on the top. Thanks
Nice vidéos Mitch they are very educational
You're welcome!
Are the screw types all the same? Or do I need to keep track of what goes where? Thanks
thanks a lot for this video ...this is help us to replacement my fly
hi mate can you put a bigger, petrol in a fly 125cc fule injection engine.
Nice video .. Do u know where I can bay the piaggio fly 100 covers
Thank you Verdrik, maybe try the covers here amzn.to/2EUJw5B
learning from your vids. keep it up
I'm looking to replace the horn the only i have to remove is the floorboard or all the plastics in front?
I think you can just remove the inner leg shield without remove the front cover
Hey did you end up finding where the horn is? Cant find it on my piaggio fly 50 2012
@@H2Osiris in front behind front wheel fender.
Thanx!
Hey! How Can I remove the battery. It is very complicated ermove the storege of the motorbike
Hi Nick i only want to remove de floorboard from a piaggio fly from 2008 van gou help me. Greets from Holand.
hello my name is gabriele and I am writing from Italy. I have a problem, I can not open the small door that is behind the front shield, to understand what opens up by pushing the ignition key. I tried to push but nothing happens. Could you help me? Thank you and congratulations for your videos, hello
gabri my guess would be the clip that sits behind the knee guard is not functioning
Holy crap the key thing is a button?!!!
A lot of screws... :O
Hey I lost the key to this can u show me how to start it
I know how
Hi guys someone tried to steal my bike. I've been told to take off the frame but I couldn't take off all the screws as the ignition is broken. I managed to take off the front screws but couldn't take off the back screws as the keys isn't turning and the front cabinet is blocked . could you tell me how to open the front cabinet please Thank-you
front cabinet you mean the glovebox door? You could remove the horn cover and use screwdriver to push the latch to open the glovebox
Try push the key in ignition in OFF position... no need to turn, I think
Thank-you mate I will try 👍🏻
Mitch mate after changing the lockset I will be able to lock the bike? because I think they damaged that pin my bike is a piaggio medley 125cc 2019
مرحبا كيفك