How to Replace Engine Water Pump 2006-2013 Chevrolet Impala
ฝัง
- เผยแพร่เมื่อ 25 ต.ค. 2024
- Buy Now!
New Engine Water Pump from 1AAuto.com 1aau.to/ic/1AEW...
This video shows you how to install a TRQ water pump in your 2006-2013 Chevrolet Impala. The water pump keeps coolant flowing through your engine. Common failures of the water pump will leave the coolant leaking, or stagnant. Both will lead to overheating if left untreated. Install a new engineered to fit water pump from TRQ for total peace of mind.
This process should be similar on the following vehicles:
2006 Chevrolet Impala
2007 Chevrolet Impala
2008 Chevrolet Impala
2009 Chevrolet Impala
2010 Chevrolet Impala
2011 Chevrolet Impala
2012 Chevrolet Impala
2013 Chevrolet Impala
Tools you will need:
• 10mm Wrench 1aau.to/oa/1AXA...
• 10mm Socket 1aau.to/oa/1AXA...
• 13mm Socket 1aau.to/oa/1AXA...
• 15mm Socket 1aau.to/oa/1AXA...
• Pliers
• 1/4 Inch Ratchet 1aau.to/oa/1AXA...
• 3/8 Inch Drive Ratchet 1aau.to/oa/1AXA...
• Torque Wrench 1aau.to/ob/1AXA...
• Anti-Freeze
• Gloves 1aau.to/oa/1AXS...
• Safety Glasses 1aau.to/oa/1AXA...
• Drain Pan 1aau.to/oa/1AXA...
• Funnel 1aau.to/oa/1AXA...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Replace the belt
@@danielfelix3785 and hoses if you can
It is officially 5:57 am in my state. I am a very young thriving mechanic, this happened to my impala at 9:45 pm with my daughter thank God I had my tools & you guys!!! helping me save a roadside assistance trip and my vehicle! Keep in mind my daughter is 2 !!
Nice video. Use spray tac to hold gasket in place. Using it for 50 yrs..
2013 Chevy impalas don't use the 3.5L it uses the 3.6L
One mistake I noticed, you’re supposed to tighten the water pump bolts to 11 foot pounds, and the water pump pulley bolts to 18 foot pounds. Other than that great video!
That belt might be the toughest part of this job . If you are not replacing it is it possible to just remove it from the upper pulleys and bungee it to the open hood above ?
Thank you that was very useful I will finish my mother’s car for Christmas
When you started the video, the camera was in too close. Would be nice to know where that first bolt is located. And why do you think that the entire belt has to come off? Save yourself some time and just move it aside.And never tighten bolts until all bolts are installed, this prevents you from stripping out the threads
good video
Thanks!
That didn't look like "approved coolant". Dex is orange, that looked yellow. Was it a problem color problem.on my computer or did you use universal?
After custom plan purchase V Shred requires a detailed questionnaire to be completed by the customer that the plan is being created for. By completing this questionnaire the customer recognizes that in preparing this questionnaire they have disclosed true accurate and fair information about their health. Upon receipt of their plan the customer agrees to confirm with their physician that the customer is medically cleared to engage in this type of athletic program.The customer understands that providing false information and failing to seek a medical opinion as to their ability to carry out these plans could result in serious bodily injury and even death.
The frost plug that's on the water pump I never seen one on a water pump what is it for what is on the other side of it?
What kind of drill is that and why don’t I have one
the only thing most agree on is don’t re-use bolts, but no one says wat bolts they are, nor does anyone agree on the torque specs - in as I said, a dum-S wrLd✋
Why wouldn’t you re use the bolts?
If there’s nothing wrong with them then why waste more money
@@FleetTech97 Exactly 💯
Easier from up top to get the petcock
Lil' tight but did my 2010 without battery removal. Every time I disconnect battery the engine won't run for a day. Something to do with anti theft system.
Why no sealant on it,??