ALL KEYS LOST 2001-2002 TOYOTA SEQUOIA (AUTOPROPAD)
ฝัง
- เผยแพร่เมื่อ 17 ต.ค. 2024
- I will show you how to obtain the key code and program new keys ..first you have to reset immo via obd with the autopropad!!
CASH APP: $PAYMEMONEYMIKE
2003-2007 sequoia is eeprom only so you have to remove and reflash the ecu!! To program a new key!! If you guys have any questions please leave a comment or email me at lilroxx001@yahoo.com thank you God bless stay safe!!!
Nice video, when I had any Lost key situation on Toyota 4c key chip I was doing it at the hard way , basically I dismantled the ecu and reset virginized the eeprom chip, but now I see that is possible to do all keys lost programming by just reset the immo, thanks bro and keep it up
Thank you for watching !! You can always go on autopropad.com vehicles select model and year and it will give you more info on that vehicle!! Blessings take care!!
this works with autopro, does not work with Im608
This all key lost procedure in teory is similar for a 2001 Toyota Camry old model? I din`t find any imformation on my country youtube chanels. Thank you for your time. Best regards form Brazil!
Thank you brother it is very similar if it is eeprom some you can do via obd
Once it goes sold red did you program them or wait until the 16 minutes was over with .?
2 questions.. why was the IMMO still flashing after the keys were programmed? And will this work on any 4c all keys lost? GOOD VIDEO LIKE ALWAYS!!
This is because it was on learning mode !! It was learning the keys the immo was ready to learn.. as you can see before I inserted the keys it was lit red not flashing!! It should go back to normal after a few minutes!!
MY KEYS AUTOMOTIVE thanks!!!
What if you have only one key?
@@Julicauto this is my question I’m
Boom that's a great info deeply appreciated your hard work and sharing knowledge. Is it only work that way with this two type of model or with other Toyota as well?
Basically most toyota but some u need to reflash the ecu unit wich is more hard work because you have to remove it from the vehicle!!
@@MYKEYSAUTOMOTIVE Do you have to re Flash at 2003 Toyota Highlander 6 cylinder
Very interesting seeing how all that was done, and thanks for the tour of your city, cheers
Thank you for watching glad you enjoyed it !! Blessings!!
Why the key light still flashing it’s not right
The light was flashing because the vehicle is still in program mode. You have to turn it off and on 5x really fast then the light goes out
@@josecito01231960 Once you are in Program mode, the process is designed to program in 2 master keys and then a valet key. After all 3 keys are programmed in, Programming mode will self terminate. To terminate before all 3 keys are programmed in, just turn the key on, then off, 5 times...
Do you gotta have 2 keys when you program all keys lost..? Or will 1 work
How long did you have to wait? I tried it last over the 16 minute mark to almost 30 minutes and nothing.
My 02 sequoia is still flashing the key Security light on the dash even while it's running. It intermittently doesn't start all the way but starts then dies. Is there something up with the programming and should I redo it again? I am a locksmith with an autopropad btw
Hey bro
I’m a locksmith in ATL, do you have any group I can join to learn each other , you are a very kind person unlike most
Thank you brother! I recommend just watch all my videos from begining to end!
I replaced my ignition lock cylinder 2002 sequoia limited it started but after a while it didn’t start or struggled to start do i have to program my key
Yes
Def didn't know I could reset immo on sequoia like this I've always used eeprom.
One quick note for anyone wondering why the security light blinks after starting is because sometimes Toyota and Lexus require 2-5 keys to close the cycle properly for some reason. But even if it blinks it will stay programmed
Thank you for sharing garret!!🙏🏼🙏🏼
Any idea why the light stayed flashing? I ask because I have this situation and csr won't stsrt. Now iam wondering if it might be something else?
How long to pull that door apart? That seems very difficult? Lishi also difficult?
10 min
the key you use was a special master key or just a regular 4c chip key?
Regular
You sir! Are a saint!!!
Hello, I have a situating with a 2005 Toyota Sequoia which I just purchased. I purchased blank Toyota keys to program the transponder, only to find out the one key give to me is a valet key. I only have the one valet key, what are my options to program new keys at this point? Do I just need to find someone with Autopadpro? I also heard of ecu flashes, am I on the right track for a solution? Appreciate your help.. Geo
Yes the ecu or immobiliser unit must be reflashed first before you can program a key! Via eeprom ..
@@MYKEYSAUTOMOTIVE Iam in the same situation. What are your rates for an eeprom reflash? How long does it take? Thank you.
Hi Mick
Did you have to generate the chip first?.
Thanks bro
When its all keys lost yes you have to generate first chip
@@MYKEYSAUTOMOTIVE
Thanks bro.
I have one good key but need to install a new ignition switch. How can I get the new keys programed? Thanks for the video.
👋🏽 greetings friend! For priority commenting please join our members only club! From a desk top or laptop next to the subscribe button you will see the join button! Thank you🙏🏼
Does it requires two keys minimum or can it be done with just one?
You can do it with just one key!!!
Will this work for a 2001 highlaner as well??
no sorry highlander 2001 is only eeprom ,first you must remove the ecu and do a reflash via eeprom directly from ic chip
What monthly plan are you using? They have different
13 a month!!
I also have a 2005 sequoia all keys lost issue. So iv been struggling with my new ecu immobilizer and 2 new keys. Can't get them to program to each other. I'm just wondering if I screwed up the process does it scramble or brick my immobilizer?! It was over 500$ for 2 keys and immobilizer from toyota. Local locksmith said 2005-07 ecu cannot be reflashed. I'm at a complete f***ing loss......... ontop of my diff blowing out back October we lost the keys to. Hahaha. Kms. Thanks.
There companies you can send you immo ecu to and the will send you precoded keys
I've always Wondered does the key have to be in the ignition and turned to on position while waiting the 16min?
Yes but thats not programming the key
Hola gordo, una duda o dos: no tenias qe siclar las llaves 5 veces on off para qe dejara de flashear el testigo ddel carrito rojo? Y la otra es, esos son 4c, se puede por obdII, solo con la popad o tambien lo hara el im508? Grasias por tu respuesta
Qiere dos llaves para que se apague ..
Can you give me an idea of how much a Locksmith would charge to do this ? I am in San Francisco
Hello greetings please join our members club for priority commenting!! Thank you! ❤️🙏🏼
I just did one but I was not able to program it would connect successfully but I tried to erase immo it said communication error and the same message popped up on my key tool max
Does that mean there’s an issue with the immobilizer system
Excellent info!!
Thank you for your constant support!! God bless take care!!
Hello This is Freddie Silva from Puerto Rico. I need to know why when i program a xhorse wireless remote to a jeep wrangler whit a key tool max after i finish the remote STOP working for no reason and is happening to the factory remote to. But if i put the key in the IGNITION the remotes work like nothing was wrong. Need some advice. Thanks.
Have you checked the batteries and signal?? What year is the wrangler??
2014 i discover that if i remove the xhorse WIRELESS remote far away like 20 meters i have no problem whit the factory remote. Only if i go to close whit the xhorse few minutes later they STOP WORKING. Don't make any sense.
2014 jeep wrangler.
New battery and signal is ok
2 day ago another customer call whit the same complaint but thi time i only make a KEY no remote. So he have a cut key whit a super chip. No remote ?????
Hey bro, I’ve missed seeing your videos. Hope all is well, look forward to seeing more great content.
Thank you !! Sorry I
Know I havnt done much !!just going through alot lately!! Thank you for being patient !!
MY KEYS AUTOMOTIVE No apologies necessary we just missed you! So glad you checked in!
@@MYKEYSAUTOMOTIVE Greetings! I have a 2006 Toyota Sequoia, how much is the going rate to make all keys lost for this vehicle?
Can i program all lost key via mini obd tool from xhorse??
You can try its all in the making the software .. i
Know u can do honda!! I would recommend you invest on a autopropad basic atleast !
Just to clarify because I see mid information. To get the light gone and out of security mode. You insert the master key do not turn and press the brake 5 times. Turning the ignition on and off works on newer Toyota Not this one.
Porque la luz no deja de flashar y la llave ya está programada (hasi funciona ese sistema)
Donde puedo enviarte un donativo gracias por tu video en mi caso reprograme con un CK 100 pero seguí tus instrucciones premio al llavaso obtuve una llave 4c gracias de nuevo
How can I replace the remote receiver where is it located on a 05 limited sequoia
Try looking behind the driverside rear upper interior panel.
¡Gracias!
Gracias a ti Juan
i have lexus ls400 all key lost same process it work
Nice thank you for watching!!
En una sequoia 2003 se puede programar asi o se tiene que leer la memoria primero
2003 se me hace que se tiene que hacer el reflash de el ecu primero
@@MYKEYSAUTOMOTIVE se podra hacer con el im608?
@@ricardorivera7579 el reflash de el ecu , si!
@@MYKEYSAUTOMOTIVE cuanto me cobras por echarme la mano en ese trabajo?
@@ricardorivera7579 no tengo tiempo en mis manos disculpe..
No se activa la alarma cuando abres el vehiculo? O como le haces para desactivar la alarma?
Si se activa la alarma se desconecta la batteria , cuando se programma la llave se usa la llave in la puerta y se prende el carro.. la alarma no sono en este video..
MY KEYS AUTOMOTIVE funciona con todos los carro el desconectar la batería? No te blokea la alarma para poder programar la llave? Es que he mirado algunos vídeos que cuando se activa la alarma ya no deja programar la llave hasta que no desconectas la alarma
Unos carros tiene alarm de mercado de accesorios .. y se activa un kill switch.. la alarma de el carro es original? De el distribuidor?
MY KEYS AUTOMOTIVE si la alarma original con la que vienen los carros, en todos los carros funciona solo desconectar la batería cuando tienes una situación de llaves perdidas y se activa la alarma,?
Where I can contact you sir? I'm in Valencia CA
good stuff!
Thank you for watching!!
Can you find the code the same way on a 98 Toyota Sienna van?
Yes sir!
@@MYKEYSAUTOMOTIVE Thank you for your help!
Do I need two keys?
You can use one! Car will still turn on but immo light will stay on .. so it probably will need a second key to turn immo light off or from start to on using one key open and close the switch 5x from off to on ending in off .. light will usually turn off
Hola tengo una sequoia 2001. Ecu quemada y cambiada. Como hacerle aprendizaje sin xtool
Qual maquina tienes??
@@MYKEYSAUTOMOTIVE x431 launch
@@oscarbadilla5777 no se puede con launch ..
Hay que invertir y comprar el xtool. Gracias amigo
Gracias por tu video programé mi llave de sequoia 2002 con llave 4c escaner ck100 quiero contribuir a tu canal gracias donde puedo enviar $$
Y para agregar una llave ,, cuanto tiempo
Cycle ignition on/off 5 times to get out of learning mode.
Yes sirr thank you!
@@MYKEYSAUTOMOTIVE
Will this work on a 2004 Toyota Sequoia all keys lost.
The light was flashing because the vehicle is still in program mode. You have to turn it off and on 5x really fast then the light goes out
Thank you Darrell!! Hope you are doing well!!
👍👍👍👍👍👍but why still immo light blinking??
Its in learning mode it usually last like that a few minutes but should turn off .. as long as the key turns on the vehicle u should be good and the light will go off in a few minutes
👍👍👍👍thanks
Guud job
Thank you for watching!!
Nice cool 👍 good
Thank you for always enjoying my videos!! Blessings take care!!
Thank very much I also have the same machine
Good
Thank u
Se necesita permiso para ser locksmith?
En cierto estados si y otros no!! Aqui en California si se acupa!! Edonde vives?
MY KEYS AUTOMOTIVE a ok yo estoy en Minnesota
You skipped a spot.. You ho from having the key in and on you come back and key is out of ign???
Thank you for the advice!
Compa la Toyota Sequoia el immo se queda flachando y después se apaga soy Luis almaraz de Zacatecas México
Hola luis como estas!!! Saludos!!
En qué parte estás tu
estoy en el valle De San Fernando California!
tried to send you email it failed
Whats your email ??
Have you or anyone else thought about drilling a small hole into the door to look at the key code on the cylinder without taking the door apart. Then put a plastic cover or black tape to cover the hole once you retrieved the key code?
Could be possible.. but it will be dark ..might need a small camera with light to see through the hole..
Dumb.. The door comes apart easy.. 10 min..
Hey Mike, quick thing for you as you seem to bear some intelligence. I'm currently a locksmith and a business owner, but formerly I have a medical technologist degree with an emphasis in microbiology. Concerning the usages of masks I hope you will allow your intelligence to supersede the BS that you've been propagated with. That cloth mask didn't nothing to stop the transference of something as small as a virus. Surgical masks are also ineffective in the transference of viruses. Overconfidence that your mask is protecting you and others is what is perpetuating the viral transmission rate. Just an FYI you did more to hurt others by going out in public wearing a mask then you did by just isolating yourself at home during the pandemic. In the future please tap into your intelligence instead of listening to leftist news media organizations who are lying to you in every facet of possibility.
Good
Thank you sir!! Blessings take care!!