ALL KEYS LOST 2007-2013 SILVERADO (AUTOPROPAD)
ฝัง
- เผยแพร่เมื่อ 24 ก.พ. 2020
- Hello everyone i will show you how to remove the ignition lock cylinder with a special key i made.... the key code is stamped on it... then we cut and program our key!! If you have any questions please leave a comment below i will help you!! Or email me at LILROXX001@yahoo.com PLEASE SUBSCRIBE THANK YOU!!!
CASH APP: $PAYMEMONEYMIKE
Paypal:
paypal.me/mike90f?locale.x=en_US
Boss
I will give you two quick tips for this ignition. On that year Chevy the ones that use the Z keyway. You do not need to remove the bottom half of the shroud and the tilt steering wheel lever. All you have to do is remove the top of the shroud. The second tip is you don't need to pry the metal band around the ears. Just take a flat blade screwdriver and a hammer. Just tap the ears in a few places and the ears will pop off without any damage. The rest of your example is good. I am just trying to save everyone time.
Keep up the good work
Thank you for watching and for you great advice !! You are appreciated!!
Does the 2009 chevy malibu have a side bar?
@@eddcolocho6321 its the same procedure
Hey Kenny by any chance you a know where I can get my hands on a B111 circle + sign to be a able to cut the key with a A puc a punch
I made a set of the "jiggle" keys for a B102 key today (1999 GMC), and it worked like a champ, appreciate the videos you do man. That little tip really came in handy for a someone who is still learning like myself.
Right on !! Im really glad it worked for you!!! !!👍🏻👍🏻👍🏻👍🏻
Did you use the 4.2 that he was talking about
@@outofsight1hernadez3 I did at the time, not anymore.
does anyone have the key code for the jiggle key
@@fxbgkeys what do you use now?
Man you just saved my life today bro. I have a key but it stopped turning the ignition, I found a small piece of metal to push up the side bar under the key and it turned right on! Thank you sir
Hell yeah this is what I need. This is the video I have been searching for 👍🏾👍🏾👍🏾👏🏾🙌🏾🙌🏾🙌🏾😃 can I use this method of finding the key code on any vehicles like Ford, Mercedes, vw, skoda, Toyota, Nissan, etc??? Thank you again this is giving me hope that I don't have to mess with the lishi picks
He said “that’s it, charge a good $350.” 😂 respect the hustle.
Great. That took work, know how, and skill.
Your videos are so so helpful! I've been doing lockouts for years and I just decided to start making keys. I bet it's a dopamine rush when the engine fires up with the key you made!
Hey there!! Yes its a quite Pleasant feeling you get!! Its more like a feeling of accomplishment!! That feeling keeps you motivated to seek for more!!
Thank you so much I was able to replace my ignition finally!
You're welcome!
Another great video the guys a genius 😂
Thank you Gary!!!!
Great job man!
Thank you sir!❤️❤️🙏🏼🙏🏼
Follow to the T.. by far the fastest way, to the T.. Thanks for Video
Thank you for watching!!
Great video as always!
Glad you enjoyed!
Good stuff bro!!
Thank you thank you!! 🙏🏼🙏🏼🙏🏼
Nice video thanks for sharing
Glad you liked it
I noticed you had a lot of jiggler keys. I thought there were only two? In the other video, you made two jiggler keys only. Great video, very educational
Look forward to your answer
I have a few some i bought , and some i made !! I have some for ford ,freightliners and chevy gm .. for simple wafer locks
Thanx my man 👍
Thank you Adam
@@MYKEYSAUTOMOTIVE i cannot turn my key off i have a 2013 impala ls
excellent bro
Thank you brother!
Cool nice job 👍👍👍
Thank you sir
Your dope brotha
Thank you! Your dope!
Gracias
Thank you for watching!!
I believe Ive got a sidewall issue. Thinking about replacing the entire Cylinder Lock but came across your Ignition Lock Cylinder Replacement/Fix video, where you made a new key and showed the sidewall to slide down. Should replace the Ignition Cylinder Lock or just cut a unprogrammed key to see if the sidewalls slide down?
I’m wanting to make a few. Where do you get the information on what cuts to use? I’m mainly looking to make a dodge one
I definitely had a kid disconnect the battery today, did not even think of putting it in reverse LOL.
ahhaa
Hey very informative video thanks for sharing….
I have a 2011 Chevy Silverado that I still have my key, but it will not turn….. it had been giving me fits but if I did the little dance and jig with the steering wheel & key it would turn. Well my dad and I just recently did a brake job on it, and went to crank it and no matter what- no luck.
I have a couple questions:
being I have a key-albeit worn- could it be used as a jiggler key?
And if I was able to get it out, could a locksmith make me a replacement key? Better question- be willing to do so?
Not trying to be a cheapskate by any means. I just live in a very rural area and a towing fee tears us up…. So I’m just trying to avoid that if possible on my old truck.
Any information would be helpful. I appreciate it!
Hello greetings 👋🏽 Friend! for priority commenting please join our members club! once you join you will also be entered to win for our monthly giveaway! If you want to join ,you can join from a laptop or computer next to the subscribe button you will see the join button!! thank you!🙏🏼❤️
Que tal maestro cerrajero y colega ya que tambien ejerzo este umilde y hermoso oficio, y veo que son muy entendibles y educativos los videos que publica, tanto para principiantes como avanzados. quiero hacer una pregunta ya que no me habia tocado jamas hacerle la llave a una acadia 2008 que tiene la chapa frizada siempre las hago con la lishi y no tengo problemas asta ahora, mi pregunta es como sacar el cilindro de la llave sin llave trae la llave circle plus (+), de antemano agradesco la atencion gracias
Mandame un email porfavor lilroxx001@yahoo.com
Que tal, una pregunta si averiguo cómo sacar el cilindro? Me topé con una 2008 yo también hoy y no pude sacar el cilindro?
Eres mi ídolo después de piolin cartóon no radio jajajajajjaja cool excelente
Jejejjejje
This works the same way with GMC, Cadillac ? What is the actual key code to cut a new key at 3:45 (between the series - not quite clear to me)? Another great video.
First letter of code should start with a g
Hey can please tell me, where do you get your blank key heads from, I saw you used it on a Mitsubishi and you just put in the correct key blank and transponder.
Those are called multi-function keys .. for now i get my keys at Americankeysupply.com but looking for different suppliers.. i love good deals and fast shipping!!
Deberías hacer un vídeo enseñando donde están el key code de cada marca de carro
Si gracias por la idea!! Muy pronto!!
Wow $350? I would offer 75 dollars and they still wouldn't call me back
🤣🤣🤣
Damn
Hola maestro que bueno que contestas en español, recien vi tu video me gusto y me suscribi, soy cerrajero estoy iniciando en la programación, una pregunta es especial el chip del circulo +? Por favor contestame, gracias.
El chip que utiliza esa llave de circulo + es especial ?
To program key without that scan tool u had in this video it is a different method the one u use three times 10 minutes on 5 seconds off each time?
Yes sir yes sir that is correct!
Nice and fast
Sure is
Which auto pro pad are you using original, basic or light?
I am using the full version!! That comes with eeprom...
I saw you had like 5 home made jiggler keys was that all different I saw you had the cuts for 2 on here if so what area the cuts you do on the rest thanks
They are a set of 4 keys they all have different cuts i have some for sale if your interested email me thank you
lilroxx001@yahoo.com
How much do you charge for regular transponder keys in your area ?
Its all depends year and the model i live in California so the prices vary
Hey Have you ever had any issues with the condor key cutter ?
Havnt had any issues yet other than when you try to cut the key a second time.. it cuts the key more deeper.. but no problems..what are the issues your having??
@@MYKEYSAUTOMOTIVE Wanted to purchase one and am not seeing much reviews online
Thank you for the Video. Do you know what i am doing wrong? I try to change the Ignition Lock Cylinder since a couple of weeks with no succes. I tyed the 3 times 10 min. procedure but it did not work. I noticed the difference, that in the desciption the Passlock sign stayes 10min on, in my situtaion it is flashing 10 min. I just bourght another blank Key, cut it but the same Problem. Any Idea what i am doing wrong? Regards Nico
I just find out, that Canadian vehicles do not have an on-board programming procedure.
How much do you charge for a key on the Chevy truck with the B111 PT key
65 and up
What if the immobilizer lamp never goes off? Have you encountered any issues with the theft system while programming with programmer or OBP? Thanks in advance.
sometimes there are other electrical problems..i would start by checking the fuses!
also when it doesn't want to program with a programmer try doing the 3-10 minute cycles !
Hola gracias por el vídeo está genial, me podría desir donde puedo comprar la erramienta para empujar la side bar del cilindro gracias
se consigue en ebay se llaman lock picks!!
MY KEYS AUTOMOTIVE cual es la marca pues me salen muchas gracias feliz tarde
If I lost my keys can I just replace the whole ignition lock? That is if I can pick it in order to remove it?
Hello greetings 👋🏽 Friend! for priority commenting please join our members club! once you join you will also be entered to win for our monthly giveaway! If you want to join ,you can join from a laptop or computer next to the subscribe button you will see the join button!! thank you!🙏🏼❤️
What blank key did you use to pull ignition?
B106 is the blank I used for this vehicle ..
Una pregunta x que no dejaste la llave con chip en vez de la mecánica ,al hacer el procedimiento?
Es lo mismo nomas hasta que te diga que pongas la llave que qieres programmar
Maestro buenas noches.
Si tenías todas las llaves perdidas entonces como abriste el switch??
Con esa llave que le metiste hubieras sacado la copia no?
No esas llaves que tengo son especiales para abrir el switch ..las tengo por venta si es que vives en los Estados Unidos!
@@MYKEYSAUTOMOTIVE
Aaa ok.
Yo solo me dedico al diagnóstico. De cerrajería no se mucho y tampoco inglés.
Jejeje.....
Saludos hasta los Ángeles. Espero algún día volver....
Where can i get that green pry tool that you are using???
Hello greetings 👋🏽 Friend! for priority commenting please join our members club! once you join you will also be entered to win for our monthly giveaway! If you want to join ,you can join from a laptop or computer next to the subscribe button you will see the join button!! thank you!🙏🏼❤️
What kind of pick is that?
Hey bro where did you get your green picking tool ?
Hello greetings 👋🏽 Friend! for priority commenting please join our members club! once you join you will also be entered to win for our monthly giveaway! If you want to join ,you can join from a laptop or computer next to the subscribe button you will see the join button!! thank you!🙏🏼❤️
I tried programming one with a km100 but the antitheft light doesn’t go off
something wrong with the vehicle most of the time .. try the 30 min on board procedure
Exelente!! Dónde consigo la herramienta que insertas ? Para remover el cilindro
Uhs-hardware
What is the name to that tool that ur using ?
How do I find a video where you made the tool thanks??!
Its on my playlist called jiggler keys
Love your videos! Just curious what do you usually charge for this service during normal hours?
Helle Cameron if you would like more information please email me to lilroxx001@yahoo.com
$350 I heard he said.
Do I need to program the key if I still have the original?
Yes
charge a good $350 hahaha i loved that part! Tired of amatures killing our business! Charge for you expertise, not their budget
I’ve seen that you have multiple jiggler keys. Would you show them how to make them?
Yes sir!! I will definitley show you!!
there is a video already that he made, I just made some using the video
@@pouncerminned863 thank you Pouncer!
Hello master whit chip did you use
Okay
What kind of pic are you using?
Where can I purchase that tool my friend ?
The pick ??
How do you determine it is a Z key way
They sell this book called autokey reference by ilco!! You can check out the keys every vehicle needs and you can also check transponder type..
what are the cuts on the jiggler keys?
Cut two one with 5353535353 etc and one with 5252525252 etc
What are the cuts for. B102 thanks for the videos I just ran into your not many people out there share we run a lot of codes$$$ they cost us for ford 25 and 25 for Gm and it adds up when you do 5 each a week just on ford and Gm ! Looking for ways to put that back in my pocket. I charge $175 for a all keys lost cut and program... nit sure if that is two low we do stay very Busy thanks for any Info !!!
@@affordableautolocksmithkey8298 what company u use for GM codes ?
I need Spencer to be a lock 🔐 Smith
Depends
Whit chip did you use
Donde puedo comprar el kit de llaves para abrir el switch
Where can I get the tool pick ?
Uhs
porque removiste el cilindro ?
Para consiguer el "codigo" para hacer el corte a la llave ..... se me hace mas facil quitar el cilindro..
Yo no soy locksmith pero estoy tramitando mi licencia, soy nuevo en esto, entonces es más fácil remover el cilindro que sacar el código con lishi?
true d para mi si..proque tarda mas con el lishi .. y luego y lishi te falto como uno o dos mas cortes... baja la applicacion instacode ... esa te ayuda a calcular el corte porque la puerte te da como 8-9 y el cilindro de incendio te da el codigo completo ..
Where do I get that device?
Try locksmithkeyless.com and americankeysupply
How can I get in contact with u I am having issues
What’s up brother where can I get these tools can you make me a key ?
Le cambiaste el cilindro y llaves nuevas amig
Hola saludos amigo! 👋🏽 para comentar con prioridad, ¡únete a nuestro club solo para miembros! ¡¡Gracias!!🙏🏼❤️
Hello been watching you a while regarding CLONED remotes to properly PROGRAMMED remotes .
On average do we charge the same to make a cloned remote to a programmed remote ??
Regards
Gary.
No different prices more cheaper for universal remotes
Thank you just did not know if charge cheaper just doing clone remotes compared to doing full programmed remotes
@@garybrown7859 yess you can charge the sam as after market ..but no the same as oem..:(
@@MYKEYSAUTOMOTIVE thank you yet again for all your help
@@garybrown7859 no problem
How much would you charge me to send me sell me some keys like that or do you have a video
Hello greetings 👋🏽 Friend! for priority commenting please join our members club! once you join you will also be entered to win for our monthly giveaway! If you want to join ,you can join from a laptop or computer next to the subscribe button you will see the join button!! thank you!🙏🏼❤️
Will it start
No
Hey my keys automotive..como estas donde puedo conseguir esas llaves
Mandame un mensaje para más información...
@@MYKEYSAUTOMOTIVE las de chevy esas que mueven el silindro para sacarlo..
Bueno días tengo una pregunta donde puedo conseguir esas llaves para quitar Switch y las herramientas
Mandame un email!! Lilroxx001@yahoo.com
@@MYKEYSAUTOMOTIVEque tal..
Se puede clonar este Chip?
O no usa chip?
?
Si
GM 39 key?
GM39 for GM B102/P1113
Dammit man $350.00 dollars hell I only charge 150.00 to make a key for those trucks
Thank you for watching glad you like it!!
Hola, TE mande email. Gracias
“Charge a good 350” not
All day
This must be how we got here from mexico
Im european
Ok
Hello greetings 👋🏽 Friend! for priority commenting please join our members club! once you join you will also be entered to win for our monthly giveaway! If you want to join ,you can join from a laptop or computer next to the subscribe button you will see the join button!! thank you!🙏🏼❤️
Ok, do these steps. Ok you’ll be fine ok u ok? I’m okayyyy
Hello greetings 👋🏽 Friend! for priority commenting please join our members club! once you join you will also be entered to win for our monthly giveaway! If you want to join ,you can join from a laptop or computer next to the subscribe button you will see the join button!! thank you!🙏🏼❤️
how can you make using on x-horse 005 with 52 52 52 52 52 , need help. I made a 4242424242.
Nice video thanks for sharing
Glad you liked it
Good videos, just one question. When do you need to clone a chip and when not to clone in adding/programming keys?
If you have the original programmed key and the car is not around you can clone it.. or if the programmer doesnt want to connect to the vehicle and its says connection failed.. you can clone his original key... if all the keys are lost you cannot clone the keys because you do not have nothing available to clone.. like i said must have the original programmed key present.
Thanks man im in auto locksmith school as we speak..i plan on getting started soon ..im scared shitless lol