ขนาดวิดีโอ: 1280 X 720853 X 480640 X 360
แสดงแผงควบคุมโปรแกรมเล่น
เล่นอัตโนมัติ
เล่นใหม่
Thank you for the information. I will be referencing your video again to learn to use mine.
Just be aware that the output of the signal generator has a DC component, so a blocking capacitor will be needed if it is used as a signal injector.
если нажать и удерживать в меню кнопку дисплей, то появится подменю, и там можно дабавить частоту на екран.
Щиро дякую!
Спасибо брат
Thank you for the information! What is the input capacitance?
@@SergeySS-z4l according to its manual , more than 100 pf,
A great learning video, thanks.
@@colindigitaljames6619 🙋🙏🙏
説明をありがとう、私のモデルはパルス幅がパルス周期として表示されます。あなたのオシロはいかがですか?
@@cg125fimotoge6 あなたのコメントをありがとう、私はそれが同じでなければならないと思います、
There's arbitrary waveform generator function on this? Your video thumbnail says so
Hi, there's a noise signal, like many signals at the same time,
Не могу понять как в Меню переключаться между окнами по вертикали.I can't figure out how to switch between windows vertically in Menu.
Hello Victor, Press [Shift ] then [ CurX ]. Or [ Cur Y ]. Then [ Shift ] Only , To switch the line.
How much would it cost in Uk ?
@@elsaarmstrong-zp6ng from AliExpress. about £70
now that's cool
Can I use the current probe CC650?
Not tested yet these two together, but I think yes You can use CC650 clamp .
@@32davdi👍
Where is the output of the generator please?
@@josefmottl5729 Above the device, there are two connectors.
@@32davdi I understand! The 1kHz output intended for calibration is also the output of the generator.
@@josefmottl5729 it's output is from 0Hz to 5MHz ,
5MHz for all waves? @@32davdi
Zeeweii dso3d12
Thank you for the information. I will be referencing your video again to learn to use mine.
Just be aware that the output of the signal generator has a DC component, so a blocking capacitor will be needed if it is used as a signal injector.
если нажать и удерживать в меню кнопку дисплей, то появится подменю, и там можно дабавить частоту на екран.
Щиро дякую!
Спасибо брат
Thank you for the information! What is the input capacitance?
@@SergeySS-z4l according to its manual , more than 100 pf,
A great learning video, thanks.
@@colindigitaljames6619
🙋🙏🙏
説明をありがとう、私のモデルはパルス幅がパルス周期として表示されます。あなたのオシロはいかがですか?
@@cg125fimotoge6 あなたのコメントをありがとう、私はそれが同じでなければならないと思います、
There's arbitrary waveform generator function on this? Your video thumbnail says so
Hi, there's a noise signal, like many signals at the same time,
Не могу понять как в Меню переключаться между окнами по вертикали.
I can't figure out how to switch between windows vertically in Menu.
Hello Victor,
Press [Shift ]
then [ CurX ]. Or [ Cur Y ].
Then [ Shift ]
Only ,
To switch the line
.
How much would it cost in Uk ?
@@elsaarmstrong-zp6ng from AliExpress. about £70
now that's cool
Can I use the current probe CC650?
Not tested yet these two
together, but I think yes
You can use CC650 clamp .
@@32davdi👍
Where is the output of the generator please?
@@josefmottl5729 Above the device, there are two connectors.
@@32davdi I understand! The 1kHz output intended for calibration is also the output of the generator.
@@josefmottl5729 it's output is from 0Hz to 5MHz ,
5MHz for all waves? @@32davdi
Zeeweii dso3d12