@@SSO1025RET it smoothed out the rasp created from straight piping. It maintained good volume. It’s not magic but made it sound healthier in my opinion.
Glad it helped. Best option without a lift is to grab a strong buddy or two. Have either jack stands or tall enough work horses to lay it on after removed. It’s honestly not very heavy. Just watch your fingers.
I thought that pointing out the location of the bolts was helpful. Taking it off, is best with a few friends or obviously a lift. The bed is not that heavy.
Yeah exactly what I thought all over the place. I wonder what was distracting him that he failed to point out each bolt hole (location) size, wiring that needs to be addressed. He glazed over the passenger side which has 2 bolts front 2 bolts rear both sides then the gas spout (tube) 😅 I replaced my exhaust muffler with a 32" Thrusher CherryBomb, removed the CATY and gutted the inside then welded a resonator inside the CATY and put it all back together. Sounds SWEET! Added nearly 10Hp to the giddyup on hills 😮
Thanks for the video! Saved me some time. Brought some clarity before starting my endeavor!
Can you do a tutorial on the dash removal?
Hey, I know I’m late to the partying. You haven’t done a video in a while but how did that Borla sound with the 2.8?
@@SSO1025RET it smoothed out the rasp created from straight piping. It maintained good volume. It’s not magic but made it sound healthier in my opinion.
Thanks much! Big help. Going to soak fasteners in Kroil now so I can break them free this spring. How did you lift it?
Glad it helped. Best option without a lift is to grab a strong buddy or two. Have either jack stands or tall enough work horses to lay it on after removed. It’s honestly not very heavy. Just watch your fingers.
Busco chasis modelo 79 quiero ber el diseño de su chasis estoi en Colombia espara rreformar el mio Gracias porsu colaboracion
So you just mention size for some bolts 🤦🏿♂️
I thought that pointing out the location of the bolts was helpful.
Taking it off, is best with a few friends or obviously a lift. The bed is not that heavy.
Yeah exactly what I thought all over the place. I wonder what was distracting him that he failed to point out each bolt hole (location) size, wiring that needs to be addressed. He glazed over the passenger side which has 2 bolts front 2 bolts rear both sides then the gas spout (tube) 😅
I replaced my exhaust muffler with a 32" Thrusher CherryBomb, removed the CATY and gutted the inside then welded a resonator inside the CATY and put it all back together. Sounds SWEET! Added nearly 10Hp to the giddyup on hills 😮