Advanced Guide for On3 Turbo Kit Install. How To Make it Last Expectations Ford Mustang
ฝัง
- เผยแพร่เมื่อ 20 มี.ค. 2020
- SMASH LIKE, SUBSCRIBE AND BELL FOR NOTIFICATIONS OF NEW VIDEOS!
Heres some how to on what made my experiences with ON3 successful. By popular demand heres some of it. These tips and tricks are vital when installing one of these kits on your fox body mustang for success. This specifically is an on3 turbo kit for a fox body mustang 87-93. Enjoy!
INSTAGRAM: neomustangs
TWITTER: / neomustangs
EMAIL: MYBUSINESS01@HOTMAIL.COM.
#neomustangs #mustang #fordmustang #foxbody #projectcar #streetcar #on3turbo #on3performance #dragracing #horsepower #stickshift #turbocharged #foxbodymustang #turbo #stockbottomend
LOTS OF GOOD VIDEOS ON THESE PLAYLISTS!:
TECH CORNER PLAYLIST: • Mods Instructional Vid...
PROJECT HOTWHEELS: • PROJECT HOTWHEELS PLAY...
BLACK CAR: • My Black Turbo Mustang...
GRUDGE NIGHT RACING: • GRUDGE NIGHT RACING TE... - ยานยนต์และพาหนะ
Great info as always! I vent the back of my intakes the same way actually. Keep pumping out the videos brother I learn something new every time!
Same from you keep that channel fire
I really enjoyed, great information
Thanks bud for sharing your knowledge and these tips and tricks!
Yw !!
Good ass info as usual man. Appreciate you taking the time to point these things out.
Your welcome. Share it up !
Thank you for the pro tips and tricks to help us make an on3 turbo kit the best it can be.
Yw
Wow, great video. Very useful knowledge you dropped on us. By far my favorite video of yours. Can't wait for my kit to show up. Thanks for sharing.
Ty !
Enjoying going through all these vids! Lots of good info!
Glad you like them!
Lots of good info! Thanks for the video!
Ya almost too much haha but thanks !
Always great content. Thanks!
Ty
your videos are spot on i appreciate everyone thanks so much.
Ty!
Neomustangs thanks for the videos and great information.
Your welcome. Thx for watching !
Another great video Dannie! Good real world info. I shared it on Modified Foxbody Mustangs. I’m sure lots of our members will use it. Keep up the good work!
Thx again man!
Best header gaskets to use are cosmetic MLS with a spray coat of copper. There is a reason all manufacturers use MLS exhaust gaskets on all there turbo cars with zero leaks for the life of the vehicle.
Thanks for the Tips will come handy when and if?. I get to turbo my Fox hopefully this summer!
You bet!
Great information and tips 👍
Thanks for watching!
Man this video is killer I’m about to buy a on3 turbo kit for my car. And I just found your channel today thanks for the video
Yw welcome to channel
Man dude you taught me a lot keep it coming
Your welcome and thanks !
Just found your channel today. LOVE the vids, informative and on my favorite car, the Foxbody Mustang. I think I'll put some of your advice to work on mine.....or whatever. :D
Appreciate and welcome !
Great info!!! Liked and subscribed. Getting ready to do up a 91 hatchback soon.
Awesome! Thank you!
Lots of good tips! I need to do a lot of that stuff my kit was just thrown together lol
Haha hotwheels was a second hand kit too
Great vid bro 👍 I’m using some of your tips on my blower car. Also, sick fuel system setup on the black car.
Thx ! I appreciate it.
Awesome video thanks
Thx !
Great info by the way brotha
Ty
Just subscribed for all the 5.0 turbo info really thinking about a foxbody, I have a 5.4 2v swapped new edge I love it but looking at the pushrod 5.0..... fuck it looks easy, turbo easy. Camshaft, heads, intake, good tune 400-500 budget easy maintenance love it. Love everything about it. Turbo for life ❤
W/o a doubt!
Good stuff !!
Thx
Perfect 💪💪💪
!!
Good stuff
Ty
Lots of good info
Your garage looks like mine with all the LMR boxes 😂
Haha ya lmr is the go to
"If you're going to be running a turbo you gotta feed the sum'bitch". Love it! Man you need to make that into a shirt!!
lol thanks !
I watch All the Great Muscle Car Channels.. You Have One Of The Most Informative Videos Out Here. I Have 2 🦊 Bodies & a '94 Convertible 🍀 I Watch All Your Videos.. Please Never Stop Making These. I use to have subscriptions to Muscle Mustang & Fast Fords as well as Mustang 🐎 Monthly. Your 📸 videos remind me of the tech tip of the month I got the magazines for. BY FAR HANDS ⬇️ Top Car Videos for the guys with projects on projects like Me 🙏 I Thank You Buddy for Your Time and Efforts ALWAYS 💯💪😎👍🦊 BoDyZfOrLiFe
Thank you !
Nice video I have a similar setup and have done most of the things you talked about besides reweld the headers fml they will probably crack soon. I might do a video of mine and show some of the upgrades I have so people get a better idea of options.
They will crack soon. And if they aren't straight they will leak.
@@Neomustangs I just got milky coolant in the oil and I'm using felpro 9333 pt1 head gaskets and 1250 s3 intake gaskets not sure whay happened probably lifted the heads and I got head studs. Gonna pull motor tmw and figure out what's going on with it
My first thing I do for the last 2-3 engines I have built. Always had the heads and motor decked to flat. Seems you do that, run the 9333s and copper spray. Install heads studs correctly I haven’t had any issues with lifting up to 15
This is some real experience here folks. Listen up.
Years of experience and tweaking!
Great video again, what do you recommend for a wastegate? 38mm or 44mm and brand? Thanks
44
On stock style setup with 42# injectors what throttle body and computer mod do you recommend
Shout Out To Brew2L & Fox 🦊 Cast as Well both Rock Too🍀🌃🌅💯🙏🦊🐎
Yes they do
This only apply to foxbodies? I want to do s197
I'm having belt length trouble. Mines like 64" but needs to be a bit longer but then the alternator hits the turbo. Would a 3g fix this issue? Wasnt sure if there smaller or not.
Keep up the videos!!
They do make smaller Alternators. If its hitting.
Awesome thanks for the response!!
You talked about protecting the plugs. Have you heard of livewires? There 10mm braided. Good up to 1400 degrees! I just recently installed a set on mine and love them! The dang boots are heat shrink, numbered and cut to length. The company is out of Tennessee.
I have actually. It’s an end game move I’m interested in for sure
@@Neomustangs they really are nice.
Ya gonna check them out for sure
Great tips. Do you sell passenger side headers with all of the mods needed?
I do not. I mean I would but On3 doesn’t sell just headers. They sell whole kits for most part. With exceptjon
@@Neomustangs How much would you charge for the service if someone mailed their On3 turbo headers to you?
eh @neomustangs do you have any tips for mounting the intercooler in an LX
Just do the straps at the top. Don’t lower mount it let the pipes hold it in place and the bumper thats but against ot
Neomustangs what size turbo are you running on your 351w and what is the biggest turbo you can put on the on3 turbo kit.
Im running a 76/75 precision.
Can you do a video on the oiling system for the turbo. I have a twin turbo kit online and every time I start it when it's cold I get down train noise. There's not a lot of information out there.
You mean like the oil feed itself? And drain?
@@Neomustangs yes that wound be cool. No one out there goes in to detail of what you need to do.
It’s true. They don’t.
dumb question - what engine computer are you using.. stock ? or which aftermarket computer and how did you tune?
He uses the Moates Quarterhorse. It has since been discontinued.
New to the whole foxbody thing and I have a question that hopefully isn’t too stupid. Could I bolt this kit onto a full stock foxbody?
Yes I just did it on project hotwheels lol. Made 471/500 wheel power on 14.5 pounds of boost. Course I would suggest following that lead without doing all the reinforcments and supporting mods to
what is the best main girdle, oil pan setup for the 302?
DSS is a good one. I like Trickflow too
What changes if I wanted to run a blow thru carb instead of the factory EFI setup?
The carb. Make sure boost sensitive power valve
Is it safe to say these tips apply to all their kits? I no longer have a Mustang but I’m about to go turbo on my Sierra 5.3
I’m not sure 🤔
Do you have a video of how all the vaccum lines are ran?
I can
@@Neomustangs thatd be sweet! Keep up the good content brother👍
I know you've been around both. Do you know much about the A9 and DA1 ECU differences? I cracked open my DA1, to check compacitors. I only find 2 compacitors in a DA1...all I see on A9's there are 3. Can you help me? Are there only 2 in a Speed Density ECU?
Da1 is a Speed density ECU. The A9 series are all mass air. Pretty much two different animals for the most part.
@@Neomustangs thanks for replying....I guess what I was asking is, do you know, if a DA1 ECU on has only 2 Compacitors in it (small green cylinders)? Do you have one in the inventory you could peek at (or have), compared to the A9 (that has 3 from all I've seen). Thanks again for your response/help.
What spark Plugs should I run on my stock head 5.0 with on3
Factory part number Motorcraft plugs gapped from .024 -.028.
Where are you located? I have sn95 306 car and had questions..its 9.5:1 compression engine. Victor Jr heads. Have some questions on turbo and social media stuff. Thanks
Hit me up on FB or instagram
Could you go further into the turbo support you did please
Which part ?
@@Neomustangs ive watched so many of your videos so i forget which one you talked briefly about it, but you said its important to make a support for the turbo due to the weight on the passenger side header, im getting ready to install my on3 kit an went with the 7665 upgrade!
Hey Neo, I'm assuming the same applies for a supercharged car, regarding feeding the car.
I've got 60cc injectors, 340L pump e.t.c, but don't have an adjustable fuel pressure regulator. What do you recommend?
Ya it would apply pretty much any boosted application. NOS uses fuel on wet shot so a big injector isn't needed.
@@Neomustangs any specific brand of fpr?
Nah. Just get like a good named brand with a water filled gauge
@@Neomustangs thanks
How to i wire my boost control with a holley term
If you could talk about how you did it that’d be muuuuch appreciated
For the boost controller bro can I use the on3 one?
It is usually not recommended to use the one in the kit. The one mentioned in this video or Turbosmart Boost Tee is a nice choice.
Would the kit work good with a carb setup 393w ?
Yes
What spark plug wire set did you run.
Taylor high heat set.
Are stainless headers better?
I don’t know bout them yet.
Do you do other people cars
Not atm
Might need a little more clarity on the On3 crossover flang u discuss in your video no complaints just understanding
What did you want to clear up!?
The bottom crossover where you said a small piece from where the blow off valve pipe or waste gate had to be cut and another bigger pipe needed to be welded for better flow is that what you were explaining just want to make sure cuz I want to follow your direction to the t.
Are 47 lbs injectors ok for the on3
Yes, that is what was suggested from On3 to me when I stopped in to their place of operation in Ohio and purchased my kit.
I'm buying a on3 turbo kit this summer for my 306 Foxbody. I have edlerbrock performer rpm heads with 202 valves, trickflow intake, F303 cam, 75mm Throttle body.
I've been told that I need to get a stand along like the Terminator X? They told me to get the Terminator X more then any other because if I got a chip for the stock ECU that it would cost as much as the Terminator X?
What do you think about this? This will be my 1st turbo car. I've never messed with a turbo or rode in a turbo car for that matter. Aka aftermarket I'm sure I've been in stock non performance car.
Sounds like a dealer trying to take your money and run.
Will a t5 work with this setup?
Go look up project hotwheels. It has before.
@@Neomustangs thanks man always good info
Fuel Atomizers…. Problem solved