HOW TO SET THE VALVES ON A 27HP FX 850V KAWASAKI MOTOR

IN THIS VIDEO I WILL SHOW YOU HOW TO SET THE VALVES ON FX 850V KAWASAKI, 27HP. THIS IS THE SAME ON A LOT OF MOTORS. THE PROCEDURE IS THE SAME, BUT THE GAPS MAY VARY. THANKS FOR WATCHING. SUB, COMMENT, LIKE.
~-~~-~~~-~~-~
Please watch: "How to remove super glue from fingers, or skin, with things at home."
• How to remove super gl...
~-~~-~~~-~~-~

[@franke.2816]

Very Helpful !! Did this procedure today on my Bobcat, had been losing power, bogging down, sputtering, Now runs like new ! Thank You !

[@beboboymann3823]

Great video sir. Your narration is slow and methodical which is very easy to follow and the videography is clear and easy to follow. Thank you for a great instructional vid. By the way, do you have a vid of your preferred method of sharpening the blades and belt changing please.

[@powerslawncarellc226]

Your video came in really handy today thank you for doing this

[@sullie35]

Hey Bob, I have same mower same engine. I can turn my engine to where both valves are closed...and then another full revolution and intake still stays closed but exhaust is now open. Then another full revolution and then intake is now open and exhaust is now closed.
Is there a problem with this or is this normal? Also should we find TDC when adjusting each valve? And last....my engine is cold
Can you please help me out? I tried it like I taking your video and its popping and cracking coming in and out of running on both cylinders or 1

[@mikespain8655]

Yep, don’t set valves when engine is warm. You can determine top dead center by putting screwdriver in spark plug hole and watching it. Motors are electric, engines are gas.

[@c.j.rogers2422]

Very helpful!

[@fivepointeightnate]

Nice ride!

[@randythompson8848]

Thank you!

[@brianwilson6801]

Great video!! Thank you for publishing!!!

[@bobslawnserviceplowing282]

thanks

[@rigobertodimas6567]

Bro set both valves .4 thousands the valves open up sooner less cranking I did mine on my v twin Brigs & Stratton John Deere 20 hp it wood take 6 times 4 the moter to start now 3 times fire right up runs like new

[@codyparker3792]

You may want to check your service manual. Valve lash should never be set while the engine is warm. They should also be set at TDC. That takes away the possibility of having the valve on the decompression release.

[@bobslawnserviceplowing282]

thanks will check that out.

[@bobslawnserviceplowing282]

thanks

[@danstevens2204]

Spot on Cody 👍

[@bobslawnserviceplowing282]

thanks

[@Ohio-PPG-Trike-Adventures]

Thanks Bob.. this was helpful....

[@bobslawnserviceplowing282]

your welcome.

[@adamaustin3373]

how many hours did you have before having to do this?

[@sidallen685]

Here’s the link for the manual for this engine Kawasaki FX850V, always set the valves on the compression stroke.

[@sidallen685]

Why aren’t you setting both valves on the compression stroke?

[@jamestubbs1989]

thats my same question, they are to be set at the same time.

[@sherrischneider2794]

Check the clearance before you loosen the adjustment bolts and nuts. They may be within spec already.

[@msclecarcrzy]

I have a question...if an engine has hydraulic valve lifters do you need to adjust the valves?

[@bobslawnserviceplowing282]

i would check your manual to be sure.

[@msclecarcrzy]

Bob's Lawn Service & Plowing
Thank you

[@bignclevenger3097]

yes, that style engine like some kholers u torque the rocker bolts to spec,

[@steveh7085]

It’s called preload

[@robertleki6322]

thanks

[@gerrykline744]

I have a fx801v which i was told i can make this a 850v simply with 30-40$ parts any ideas??

[@bobslawnserviceplowing282]

never heard of that, let me know if you find out. thanks

[@Tyrovant]

You can. There are 2 ways to do it. 1) Just replace the Throttle Shaft (~$35) PN:160410029. 2) The shaft comes with a throttle stop disk machines on the end of it, you can use a Dremell tool and grind down the stop disk ~1/4" on the outside There is a point on the stop that indicates where full throttle is. The 801v is stopped at 80%. The 850v is stopped at 100%. That is the only difference in the 2 engines.

[@1987timevans]

@@Tyrovant so you are saying the 850 revs higher then the 801?

[@Tyrovant]

@@1987timevans The Revs are the same so the Governor will still keep the throttle at a less than max position but when the engine starts to bog down the Governor will then call for more throttle and the 801 stops at 75% but the 850 allows 100% throttle and access to more horsepower. BEST MOD YOU CAN MAKE TO A 752 or 801.

[@wh8085]

@@Tyrovant , great info ! Do you know if this mod will work on Kaw V691

[@romak4756]

This is NOT how you do this. Sad

[@rodneyturner6411]

U like ur x one

[@bobslawnserviceplowing282]

KNOW