Fuel Injector - 2004-2008 5.4L Ford F-150

แชร์
ฝัง
  • เผยแพร่เมื่อ 7 ก.พ. 2025
  • On this episode of Fear No Fix, Chris and Jordan replace a fuel injector in a 5.4L Ford F-150 (model years 2004-2008).
    Need help diagnosing issues with your vehicle? Don't just read codes, get confirmed fixes with BlueDriver! Get the #1 Scan Tool on Amazon here:
    Amazon.com:
    www.amazon.com...
    Amazon.ca:
    www.amazon.ca/...
    Required Tools:
    Socket set: amzn.to/3vYpfGm
    3/8 torque wrench: amzn.to/3feIl4e
    ¼ torque wrench: amzn.to/3uWxC5g
    10 inch extension: amzn.to/33QvgsR
    Plier set: amzn.to/3fZnXog
    rags: amzn.to/3y4xceY
    Engine Oil: Varies by model please check owners manual
    Fix Details:
    DTCs (Diagnostic Trouble Codes) associated with this fix:
    • P0171
    • P0174
    • P0200 - P0208
    • Any other codes related to misfires
    Symptoms associated with this fix:
    • Lean or rich condition
    • Poor fuel milage
    • Poor engine performance

ความคิดเห็น • 39

  • @georgekelly5338
    @georgekelly5338 ปีที่แล้ว +11

    If you want to avoid dropping your spare tire to disconnect the fuel pump module, look directly below the driver door on the outside of the frame. You'll see a long black plastic cover, so pop it off. Underneath is 2 connectors. Disconnect the bottom one and it kills the fuel pump.

  • @adrftgvvbh
    @adrftgvvbh 3 ปีที่แล้ว +15

    Besides having to use a crowbar to remove my fuel injector rod wiggling it do not work at all. The injectors were really stuck in there. Everything went pretty smooth because of this video. Extremely helpful, amazed it doesn't have more views.

  • @stevejohnson8773
    @stevejohnson8773 3 ปีที่แล้ว +15

    Well done video. Maybe mention why you determined cylinder 5 fuel injector was bad, because a lot of the times a basic diagnostic tool will not narrow it down to a specific cylinder.

    • @TylerBaker-ii2rg
      @TylerBaker-ii2rg ปีที่แล้ว

      Oh my gah 😊 YW 😂😂😂😂😂🎉ako

  • @robertcutshall7912
    @robertcutshall7912 2 ปีที่แล้ว +4

    Love the part about no Fire good job

  • @IsanaDasAnanda
    @IsanaDasAnanda หลายเดือนก่อน

    Thanks guys. Now I know how to replace number 6 myself.

  • @elberjuarez9521
    @elberjuarez9521 2 ปีที่แล้ว +1

    Thank you guys for everything. God bless you.

  • @codyblenden369
    @codyblenden369 3 ปีที่แล้ว +10

    Thankyou for the well detailed video, and thankyou for good quality content! Everybody else films with a potato.

  • @John2323-b1m
    @John2323-b1m 2 ปีที่แล้ว +1

    Another awesome videos guys !!

  • @edilmendez9153
    @edilmendez9153 4 ปีที่แล้ว +3

    Thanks for the video 👍
    Well explained

  • @chad..8189
    @chad..8189 3 ปีที่แล้ว +2

    Am i the only one that cleans the engine compartment??

  • @juancarlostorres1703
    @juancarlostorres1703 ปีที่แล้ว +1

    My truck being making a knock sound every time step on the gas ima try to replace all of them and the spark plugs as well

    • @ssination
      @ssination 9 หลายเดือนก่อน

      Find the issue yet? Cracked exhaust manifold?

  • @ElChoriChori
    @ElChoriChori 3 ปีที่แล้ว +1

    thank you so much for this video , very good explanation

  • @TEllis80188
    @TEllis80188 2 ปีที่แล้ว +2

    Do the injectors on the 05-08 f150 5.4 not need to be programmed?

  • @davidwillis5016
    @davidwillis5016 3 หลายเดือนก่อน

    Thanks

  • @pauleadams3268
    @pauleadams3268 3 ปีที่แล้ว +2

    What is the average cost to replace the number 7

  • @beratbrahimi5767
    @beratbrahimi5767 3 ปีที่แล้ว +1

    Very good

  • @tonythompson9905
    @tonythompson9905 2 ปีที่แล้ว

    I have a 2001 f150 supercrew with the 4.6 no injector pulse wiring harness has been traced an checked by two shops changed computer still no injector pulse i have fuel pressure an fire

  • @royrowan1927
    @royrowan1927 11 หลายเดือนก่อน

    Can I remove the whole fuel rail and replace all 4 of them

  • @royrowan1927
    @royrowan1927 11 หลายเดือนก่อน

    I HAVE A 2000 F150 5.4 what is the best investor for this motor. Thank you.

  • @FA1THFAML1LYF1SH1NG
    @FA1THFAML1LYF1SH1NG 3 ปีที่แล้ว +2

    What about on a 4.6l

  • @DavidJones-wq5fx
    @DavidJones-wq5fx 2 ปีที่แล้ว +1

    Hi , good video . Do you know where can I get the injectors retaining clips for this engine ? Thanks

  • @Bluelineclapper312
    @Bluelineclapper312 ปีที่แล้ว

    Can you run the same fuel injectors from a 5.4l triton on a 4.6l triton motor?)

  • @randym-ni6gj
    @randym-ni6gj ปีที่แล้ว

    How much does a mass airflow sensor cost

  • @Thaboytony
    @Thaboytony 9 หลายเดือนก่อน

    How do I know which injector is what number?

  • @Goldensnakey
    @Goldensnakey ปีที่แล้ว

    Anyone have a version where someone does this on a 4.6l v8 f150? between 2004-2008

  • @cliffjt1549
    @cliffjt1549 3 ปีที่แล้ว

    Hi, could this help fix black smoke from exhaust?

  • @michaelholloway4801
    @michaelholloway4801 2 ปีที่แล้ว

    I got a p2196 code nobody can figure out the problem bank 1 sensor 1 and 2 was changed maf sensor was changed problem still exist

    • @darcyklein9952
      @darcyklein9952 2 ปีที่แล้ว

      I have the exact same issue right now. That and trying to figure out how to unclip the injector from the rail

    • @monchismillan4292
      @monchismillan4292 ปีที่แล้ว

      Do u fox ur plobem?

  • @Panelson74
    @Panelson74 3 ปีที่แล้ว

    I believe you could have floored it for a flood clear.

  • @mrgarrett9064
    @mrgarrett9064 3 ปีที่แล้ว

    I have a ford 4.6 they told me bank 1 injector is bad how do I find bank 1 to replace it

    • @stevejohnson8773
      @stevejohnson8773 3 ปีที่แล้ว +5

      Bank 1 is the pass side, where cylinder 1 is. Bank 2 is the opposite side.

  • @isthisbetterwell9958Ds
    @isthisbetterwell9958Ds หลายเดือนก่อน

    your that far you replace all, not just 1

  • @chefvegeta
    @chefvegeta 3 ปีที่แล้ว +1

    my truck didn’t start when i took the fuel thing off in the back

    • @doitwithtrevor1178
      @doitwithtrevor1178 3 ปีที่แล้ว +3

      You mean the fpdm? (Fuel pump driver module) ?? It’s not supposed to start when you take that off.. lol it’s to get the psi out of the fuel rails and lines