The plastic cover above the glove box pulls straight out from right to left no fasteners for anyone wondering like i was! Thanks for the mint video man👌
I noticed something. The bolt that connects the bottom of the net isn't reused by any door kit. My net was torn to shreds anyway so I cut that puppy off and flipped it out of sight. Never going to use another net anyway. All that cover removal is nonsense!
Thanks for the great video. After hours of trying to figure out the door latches and bracket placement, It helped me install mine with a few modifications.
Pretty much nailed it. Only thing I’d add is the fact that you have to trim a small portion of the plastic off of the glove box in order to re-install. Also, has anybody else had an issue with the bottom of the door facia getting caught on the plastic snap fasteners? Can’t seem to get it mounted high enough to avoid this (yes I tried adjusting bottom bracket of shoulder bar). Hate the idea of having to trim the facia.
Great Video it helped my install greatly. Thank you Sir, one question is there a easy way to put the plastic plugs in since they look bigger than the tubing? Thank you again, Dirt Specialties should appreciate your video.
@@Tyler181 I know I'm late to the game, but I had to cut my glove box also on the outerside. It was pretty easy, but took me like... 10 minutes to figure out why I couldn't get the box back in.. THAT would have been nice to know... Great video & very informative.... Thank you!
THANK YOU been messing with this thing for 30 minutes banging my head against a wall.. finally saw where the glove box was coming into contact with the supplied jamb. Couldn’t find an explanation anywhere other than this comment.
Dumb question, can you see the part numbers for the latch on the doors I purchased used doors without hinges due to the being junk cheaper replacements
These DO NOT FIT A 2017 CanAm commander 800 xt Rotax. No way possible. Slots do not even come close to lining up on the bottom part of back of doors. Junk.
The plastic cover above the glove box pulls straight out from right to left no fasteners for anyone wondering like i was! Thanks for the mint video man👌
I noticed something. The bolt that connects the bottom of the net isn't reused by any door kit. My net was torn to shreds anyway so I cut that puppy off and flipped it out of sight. Never going to use another net anyway. All that cover removal is nonsense!
Installed these doors yesterday on my 2015 Commander XT. Was able to follow the directions step by step to complete the job. Thanks for the video!
Thanks for the great video. After hours of trying to figure out the door latches and bracket placement, It helped me install mine with a few modifications.
Great product!!! We were very impressed with the quick shipment, easy install, and Tyler's very informative video. Highly recommend
Tyler ....is there a storage bag kit that would fit the dirt specialties doors that we installed?
I just got these today for my 2015 xmr.Can't wait to get 'em on.
How do you like them
@@shawnmckee14 These are nice.got 'em on and had our first ride up here in maine. no rattles.
Pretty much nailed it. Only thing I’d add is the fact that you have to trim a small portion of the plastic off of the glove box in order to re-install.
Also, has anybody else had an issue with the bottom of the door facia getting caught on the plastic snap fasteners? Can’t seem to get it mounted high enough to avoid this (yes I tried adjusting bottom bracket of shoulder bar). Hate the idea of having to trim the facia.
My package didn’t come with brackets like you got in the video
Holy shoot did this video help me a bunch, thank you for making it
Great Video it helped my install greatly. Thank you Sir, one question is there a easy way to put the plastic plugs in since they look bigger than the tubing? Thank you again, Dirt Specialties should appreciate your video.
They should just pop in. I would line them up and tap with a mallet. If they truly look bigger, maybe reach out too dirt specialties
Good to see your back
thanks helped a lot
great video. just a fyi, fender washers are the large washers
Having trouble after installing the doors how do you get the glove box back in?
cut it
@@Tyler181 I know I'm late to the game, but I had to cut my glove box also on the outerside. It was pretty easy, but took me like... 10 minutes to figure out why I couldn't get the box back in.. THAT would have been nice to know... Great video & very informative.... Thank you!
THANK YOU been messing with this thing for 30 minutes banging my head against a wall.. finally saw where the glove box was coming into contact with the supplied jamb. Couldn’t find an explanation anywhere other than this comment.
Dumb question, can you see the part numbers for the latch on the doors I purchased used doors without hinges due to the being junk cheaper replacements
Nice how-to video 👍👍
Thank you
Couldn't get the latch to reach the striker so I had to improvise by welding a bolt
anyone know where i could get them? amazon link is sold out
Hey bud, update? Any problems? Do they rattle?
Good doors after install they look good. I had some additional adjustment after riding a few times but other than that they are on point
So how do you open the door from the outside if you shut it? No way to. Lol
You reach in and hit the latch..
I got these for 370.00 to the door. Compared to 600-800.
These are the going price for theae
$329 right now plus tax 😆 just order mine
First step should be to get rid of those stupid nets !!!!!
These DO NOT FIT A 2017 CanAm commander 800 xt Rotax. No way possible. Slots do not even come close to lining up on the bottom part of back of doors. Junk.
I'd check with manufacturer, I'm not sure what years they fit..
They are not supposed to line up perfect. They are supposed to align just enough for one bolt to be installed. Fit great for my 2015 1000xt.
Installer failure. Mine went on fine@@thomaslutz646