As an Engineer and Electrician, I built my own rig using a skyline R33 bucket seat & E brake & bought a cheap frame but chopped it up & made it better, wired the circle button to a plug for the E brake then added the wheel pedals & shifter, I hid all of the wires inside the frame pipes & made sure it has adjustments, I love it & do not at all fancy buying a flash pre built one.
You should do more of these reviews if possible. Very interessting and enjoyable to watch not to mention that i am sure that you would find some hidden gems among those cheap cockpits. Vivo cockpit is one of those gems imo.
I have a $299 vivo cockpit for almost a year now and it’s been a solid upgrade for the price. $50 more dollars I was able to mount my monitor directly to the rig for even more immersion.
lol an armchair and the nlr wheel stand was amazing for years for me until I tried a proper rig with peripherals haha, then went sim lab route (with goodies) and am so satisfied. Another banger man, I like the change up in content! ( maybe because it’s the first one I don’t feel the need to spend money after watching :) ). Hope you’re well
lol Thats always good for the bank balance! If you've gone Sim Lab then you'll be sorted for life mate, same as any profile rig. Yes I'm all good thanks and same to you! :D
I am still using my NLR Wheel stand 2.0 with the full cockpit conversion GT Seat Addon - haven't regretted it a bit, I have just recently grabbed GT omega's monitor stand which is in place now ready for my upcoming 49" super ultrawide monitor, fun times indeed. Anything that brings new simmers to the market is all good I say.
Nice to see a cheaper rig tested, not all of us have the cash or room for a full rig, I only have a NLR wheel stand 2 & G923, ACC, AMS2, Dirt rally2 etc. Started off with GP1 & Thrustmaster wheel years ago
I do try to cover all options but it's rare the really low end stuff comes my way and there's a lot of Chinese tat out there that just shouldn't be considered.
Good vid. I started with an openwheler cheap cockpit, it was a little more than this but still pretty cheap. I really liked it for what it was - customer service from them was excellent too. I got a VRS DD and had upgraded the openwheeler with the DD mount kit, it wasn't perfect and had a little flex but not bad at all. I ended up swapping to an actual rig, but the openwheeler did great for a while.
Looks actually pretty decent for a non dd and maybe even alittle peice of wood jammed under the pedal deck might help out alot, plus with it being so cheap if the poor design quality or whatever on the side bothers u u could prob just paint on it and do ur own if ur artistic.
Karl great review btw, what tends to happen is that major brands who cannot shift enough stock let other distributors rebrand and at a massive reduction of the cost! But, as for warranty it can be limited, but essentially you could be getting a bargain!
I have one of the Hottoby cockpits that's now marketed as a flight sim cockpit. They offered a seat mounting section for it, so I ordered that. Once all bolted together properly, it's quite solid. Only downside is that you have to source your own seat. It's adjustability is nearly unlimited since everything can adjust separate of everything else. The cockpits like in this review leave a lot to be desired when it comes to adjustments....
@@aaronthomas6155 Oh I got mine with a black racing seat all for £250, wasn't expecting much for that price but I don't see why I'd need to spend more. It's great.
My sim rig cost be about 600$ total. my wheel is a DD Cammus C5 for 310$ used G29 pedels for 50$ and the Gpro hub to use them standalone was 45$. Ebay gated shifter and ebay handbrake for 50$ each. I use an older TV i got for free off of facebook and my stand is made of 2x4s from my barn and an old padded broken rocking chair i cut the legs off. she races like any other non motion sim. you CAN game on a budget but there is a point where going for the cheaper option can be bad for preformance. Do your research on each part and make an informed decision. dont just shoot for the most expensive or most cheap option.
If you play in VR or use a wall-mounted monitor like you have. You could use the monitor arms in the position you have and use clamps or bolts to hold the end of the pedal plate and prevent the flex.
I am rocking my T150 from 2014ish. It is clamped to my desk, but the clamp screw has broken. The pedals are taped to a laptop box. I still have so much fun with it on a regular basis, and recently got more use out of it with the recent acquisition of a HTC Vive from 2016ish. :)
You might be able to stiffen up those trays by getting some shims and jamming them on the side without the screw clamp. Shouldn't look too bad if you get some of the black composite ones since it would be down below sight-lines of the super fancy red painted panels.
It's better when the monitor stand is separate from the rig. It can be moved closer or farther. Split design is less bulky, and eliminate vibrations on the monitor.
Sure it wobbles! That's called "motion platform" for us that are not spending 10k on a racing sim setup. I might get this. I own a welder I can re-enforce it.
i have a gt omega prime i love it i got my son a small cheap ebay rig. it was a wheel stand turned into a full rig they sell the stand and seat pieces. it not bad but i would use anything 5mn or more because its shakey. it was only like 150 160 without a seat but it works.
It looks good!!? I have a cheap cockpit and I had to make steel anchors arms for the foot plate because of flexing. I have load cell hydraulic pedals and it was a necessity. But now after seeing this one I think I got ripped off even if I only spend $150 because this one looks way better then mine and it’s a Formula style which is what I want, currently I have a Touring cockpit. I couldn’t get an expensive cockpit after spending over $1k on my DD+wheel base clubsport F1 V2.5 wheel and pedals, my wife wouldn’t have been nice to me. 😢
Nice review! I am in the plans of buying a race setup. Won't be playing any serious and don't have a massive budget but I still want some "real" stuff and this one seem to be really good for my purpose. It looks pretty good and looks somewhat expensive like many other cheap things. But as always when on closer look and use you realize the price. I was thinking if it might be possible to cheaply modify the pedal stand to be more sturdy or solid? Maybe brace it so it don't budge down when pedals are pressed hard, idk.
Great reviews Karl.. So for a £400 budget for my 10 year old lad..and also myself .. what would you recomend?.... we use VR . so no screen support needed
i actually bought a cheap 150€ tubular rig from dardoo ( without seat ...) what is almost a copy of gt omega titan . 50mm stealtubes this thing is sturdy enough for my 8nm csl. way less flex than this one you shown
I used to own a playseat evolution. I upgraded to a sim lab gt1 pro. I think no one should ever buy one of these cheap flexible frames if they seriously want to race. They are genuinely chinese crap compared to an extrusion rig. It isnt just the flex that the issue, it is impossible to adjust these to where you want it and that ergonomically fits you. And the post gets in the way if you are using three pedals. The seat being flexible will make it almost impossible to be consistent on the brake, you really want a firm support for your lower back. I would buy this for a child that just wants to drive around in forza on a logitech, not for anything serious. Although when I have a child I will buy him/her an extrusion rig if they are interested in racing
The word "seriously" is exactly the one mate, this is more of a "toy" setup or for those that literally can't justify or have the money for anything else... it's till better than using a controller.
Brother, I believe that the shifter mount arm may be better with the long side being used for the forward and backwards movement instead. could it be installed in that way?
i got a copy of the gt omega art for 250 including monitor stand and seat.. got a g pro (that i got for 600) and tlcms mounted to it and its way better than a play seat.. there are some issues with the pre drilled pedal tray but nothing that cant be addressed with some extra holes.. all in all the cheap rigs can be very good bang for buck if you do a lil research
Having spent a total of £100 on a frame + seat (the seat is absolute trash, but the whoe setup is better than this) i find this all hard to swallow. (having said that i dont like the possition, and i use vr) IMO people should make their own *if they can* anything else is atleast 4x over price.
I wonder, can that L-bar on the shifter mount be reversed to reduce how much it sticks out? Also, (I'm assuming no) is the monitor stand adjustable to bring it closer?
Karl have you tested it the SIMETIK K1 or K3 sim rigs? Interested to see how they compare to some of the other rigs in the price range. Look the part but as we know looks can be deceiving
Hey Karl great review as ever! Any recommendations on a decent entry level motion rig? I've seen some on Amazon which appear quite cheap but have quite shit reviews too 😂 I'm guessing you'll say Next Level?
Motion rigs are over priced for the experience. I've a DoF 3 axis platform. While it's real good, the price is still hard to justify. I recommend transducers if you aren't running them yet. Much better bang for buck and they enhance the driving experience more than you would think.
You're obviously new here! lol Did you see me show you how wobbly the wheel deck is? How much the pedal tray flexes and say how uncomfortable the seat is?!
There's no such thing as to cheap some have made their own setups out of spare wood they had a cheap used car seat and a lot of them are better than the crap you can buy
Yes there definitely is! Some things are so cheap they do not function as indented, or last one or two uses before breaking.... thats too cheap and there's plenty of that on eBay, Amazon, Temu, Aliexpress, etc.
Proof you can still have fun even if your diwangus is a bit wobbly.
It's a feature not a bug.
I like this guy!
Now i know where my wife got that line from
As an Engineer and Electrician, I built my own rig using a skyline R33 bucket seat & E brake & bought a cheap frame but chopped it up & made it better, wired the circle button to a plug for the E brake then added the wheel pedals & shifter, I hid all of the wires inside the frame pipes & made sure it has adjustments, I love it & do not at all fancy buying a flash pre built one.
built my own aswell, not an engineer, made out of steel no flex cheaper than a logitech g29
You should do more of these reviews if possible. Very interessting and enjoyable to watch not to mention that i am sure that you would find some hidden gems among those cheap cockpits. Vivo cockpit is one of those gems imo.
On this rig, id use a cable and couple of turn buckles to pull the deck towards the monitor stand, and eliminate the vertical bobbing
Yes Karl!! pin ball machine in the man's cave is a must for us 40 plus'ers 😂
It sure is!! :D This is only a VPin but I've promised myself a real one for my 50th in a few years!
I have a $299 vivo cockpit for almost a year now and it’s been a solid upgrade for the price. $50 more dollars I was able to mount my monitor directly to the rig for even more immersion.
lol an armchair and the nlr wheel stand was amazing for years for me until I tried a proper rig with peripherals haha, then went sim lab route (with goodies) and am so satisfied. Another banger man, I like the change up in content! ( maybe because it’s the first one I don’t feel the need to spend money after watching :) ). Hope you’re well
lol Thats always good for the bank balance! If you've gone Sim Lab then you'll be sorted for life mate, same as any profile rig.
Yes I'm all good thanks and same to you! :D
I am still using my NLR Wheel stand 2.0 with the full cockpit conversion GT Seat Addon - haven't regretted it a bit, I have just recently grabbed GT omega's monitor stand which is in place now ready for my upcoming 49" super ultrawide monitor, fun times indeed. Anything that brings new simmers to the market is all good I say.
I have the NLR wheel stand 2 as well, wanted to add the GT seat kit but the floor space required is against me.
Nice to see a cheaper rig tested, not all of us have the cash or room for a full rig, I only have a NLR wheel stand 2 & G923, ACC, AMS2, Dirt rally2 etc. Started off with GP1 & Thrustmaster wheel years ago
I do try to cover all options but it's rare the really low end stuff comes my way and there's a lot of Chinese tat out there that just shouldn't be considered.
This looks like it could work for me, if there was some way of getting the seat more upright, or changed altogether. Thanks for sharing!
No problem 👍
playseat trophy is also great, playing with it now since a 1 year full fanatec setup and working perfect and comfort is amazing.
Good vid.
I started with an openwheler cheap cockpit, it was a little more than this but still pretty cheap. I really liked it for what it was - customer service from them was excellent too.
I got a VRS DD and had upgraded the openwheeler with the DD mount kit, it wasn't perfect and had a little flex but not bad at all.
I ended up swapping to an actual rig, but the openwheeler did great for a while.
Now this is fun content. You're a legend Karl
Cheers mate!
Looks actually pretty decent for a non dd and maybe even alittle peice of wood jammed under the pedal deck might help out alot, plus with it being so cheap if the poor design quality or whatever on the side bothers u u could prob just paint on it and do ur own if ur artistic.
Karl great review btw, what tends to happen is that major brands who cannot shift enough stock let other distributors rebrand and at a massive reduction of the cost! But, as for warranty it can be limited, but essentially you could be getting a bargain!
Got a Hottoby tubular cockpit from ebay for £250, doesn't flex at all, seat is as adjustable and comfy as my own car, would recommend.
I have one of the Hottoby cockpits that's now marketed as a flight sim cockpit. They offered a seat mounting section for it, so I ordered that. Once all bolted together properly, it's quite solid. Only downside is that you have to source your own seat. It's adjustability is nearly unlimited since everything can adjust separate of everything else. The cockpits like in this review leave a lot to be desired when it comes to adjustments....
@@aaronthomas6155 Oh I got mine with a black racing seat all for £250, wasn't expecting much for that price but I don't see why I'd need to spend more. It's great.
Cheers for that info, looks like an incoming upgrade for me!
I bought an ARES off of Amazon for $390US and I am quite happy with it.
My sim rig cost be about 600$ total.
my wheel is a DD Cammus C5 for 310$ used G29 pedels for 50$ and the Gpro hub to use them standalone was 45$. Ebay gated shifter and ebay handbrake for 50$ each. I use an older TV i got for free off of facebook and my stand is made of 2x4s from my barn and an old padded broken rocking chair i cut the legs off. she races like any other non motion sim. you CAN game on a budget but there is a point where going for the cheaper option can be bad for preformance. Do your research on each part and make an informed decision. dont just shoot for the most expensive or most cheap option.
If you play in VR or use a wall-mounted monitor like you have. You could use the monitor arms in the position you have and use clamps or bolts to hold the end of the pedal plate and prevent the flex.
Yes you could!
I am rocking my T150 from 2014ish. It is clamped to my desk, but the clamp screw has broken. The pedals are taped to a laptop box.
I still have so much fun with it on a regular basis, and recently got more use out of it with the recent acquisition of a HTC Vive from 2016ish. :)
Exactly, don't have to spend big money to have fun!
You might be able to stiffen up those trays by getting some shims and jamming them on the side without the screw clamp. Shouldn't look too bad if you get some of the black composite ones since it would be down below sight-lines of the super fancy red painted panels.
It's better when the monitor stand is separate from the rig. It can be moved closer or farther. Split design is less bulky, and eliminate vibrations on the monitor.
I built my own sim rig using wood and some bolts and an old racing seat from a race car that I got stupid cheap and it’s really not bad.
I got a $299 sim rig from Amazon and its lasted 2yrs now. All good here..
Sure it wobbles! That's called "motion platform" for us that are not spending 10k on a racing sim setup. I might get this. I own a welder I can re-enforce it.
I little bracing would go a long way!
Honestly, looks better than my Next level Racing F-GT
i have a gt omega prime i love it i got my son a small cheap ebay rig. it was a wheel stand turned into a full rig they sell the stand and seat pieces. it not bad but i would use anything 5mn or more because its shakey. it was only like 150 160 without a seat but it works.
Yeah a perfect example of where this sort or product fits in.
What did you use for a seat?
A lumbar pillow would probably fix the bar thing. My GT Omega Titan came with one, but I don't use it cos the seat is perfect by itself.
Didnt come here expecting to see karls new diwangus but i cant complain.
Hey you just never know!
It looks good!!? I have a cheap cockpit and I had to make steel anchors arms for the foot plate because of flexing. I have load cell hydraulic pedals and it was a necessity. But now after seeing this one I think I got ripped off even if I only spend $150 because this one looks way better then mine and it’s a Formula style which is what I want, currently I have a Touring cockpit. I couldn’t get an expensive cockpit after spending over $1k on my DD+wheel base clubsport F1 V2.5 wheel and pedals, my wife wouldn’t have been nice to me. 😢
I see so many ways to sturdy it up for next to nothing ro make it a tighter unit doesn't look to bad
Diwangus, is a brand that Jimmy Broadbent would come up with!
Nice review!
I am in the plans of buying a race setup. Won't be playing any serious and don't have a massive budget but I still want some "real" stuff and this one seem to be really good for my purpose.
It looks pretty good and looks somewhat expensive like many other cheap things. But as always when on closer look and use you realize the price. I was thinking if it might be possible to cheaply modify the pedal stand to be more sturdy or solid? Maybe brace it so it don't budge down when pedals are pressed hard, idk.
Another consideration for entry level…ASR 3, junkyard seat, VR (no monitor stand needed).
VR and "entry level" do not go hand in hand, for a good VR experience you need at least a RTX3080, better still a RTX4080 and comparable CPU.
@@KarlGoslingtrue. How about we compromise and trade VR for sitting in front of your TV on a table? 😂
You are the english John Cena 💪 Good review 👌
So I've been told mate! lol
Dewangus...
That's a quality name.
It tickled me also! lol
Love your channel dude!
Cheers mate! lol
not sure about that seating position being fixed in f1 style, but it looks useable.
Yeha I didn't like that!
Put lock washers on the quick release for steering wheel will lock it down better
Thanks for the good review!
Glad it was helpful!
the angle of the seat killed it for me unfortunately, I won't be able to see myself driving with that much tilt. Thanks for the review.
Yeah I don't like it either!
Great reviews Karl..
So for a £400 budget for my 10 year old lad..and also myself .. what would you recomend?.... we use VR . so no screen support needed
GT Omega Titan or Prime Lite R depending what style you prefer.
www.gtomega.com/discount/GTO5?rfsn=4405211.88b36&Karl
i actually bought a cheap 150€ tubular rig from dardoo ( without seat ...) what is almost a copy of gt omega titan . 50mm stealtubes this thing is sturdy enough for my 8nm csl. way less flex than this one you shown
Yeah this is pretty wobbly.
My seat was more expensive than this. I think it's a super starter kit, and even some of the cheaper rigs are quite a bit more expensive.
Great Video Karl
Glad you enjoyed it
I used to own a playseat evolution. I upgraded to a sim lab gt1 pro. I think no one should ever buy one of these cheap flexible frames if they seriously want to race. They are genuinely chinese crap compared to an extrusion rig. It isnt just the flex that the issue, it is impossible to adjust these to where you want it and that ergonomically fits you. And the post gets in the way if you are using three pedals. The seat being flexible will make it almost impossible to be consistent on the brake, you really want a firm support for your lower back. I would buy this for a child that just wants to drive around in forza on a logitech, not for anything serious. Although when I have a child I will buy him/her an extrusion rig if they are interested in racing
The word "seriously" is exactly the one mate, this is more of a "toy" setup or for those that literally can't justify or have the money for anything else... it's till better than using a controller.
@@KarlGosling can't agree more
Sir, what you do with Di wangus in the privacy of your own home is none of my business! 😜
a pin and two arcade stick.... my man your living right
Got to have hobbies right! :D
Brother, I believe that the shifter mount arm may be better with the long side being used for the forward and backwards movement instead. could it be installed in that way?
You could try for sure.
Dwayne Angus 😂
it's not how expensive your diwangus is, but how you use it 🤣
lol Sure is! 😆
Put some cardboard in there that should make it more rigid
i got a copy of the gt omega art for 250 including monitor stand and seat.. got a g pro (that i got for 600) and tlcms mounted to it and its way better than a play seat.. there are some issues with the pre drilled pedal tray but nothing that cant be addressed with some extra holes.. all in all the cheap rigs can be very good bang for buck if you do a lil research
Having spent a total of £100 on a frame + seat (the seat is absolute trash, but the whoe setup is better than this) i find this all hard to swallow. (having said that i dont like the possition, and i use vr)
IMO people should make their own *if they can*
anything else is atleast 4x over price.
Now we need a wife/girlfriend-friendly rating on each rigs!
5:44 😂😂😂😂😂😂😂😂😂
When things go wrong 😭
I wonder, can that L-bar on the shifter mount be reversed to reduce how much it sticks out?
Also, (I'm assuming no) is the monitor stand adjustable to bring it closer?
Doesn't look like it... The pictures on their website only show 1 mounting location for it.
Possibly and no.
Karl have you tested it the SIMETIK K1 or K3 sim rigs? Interested to see how they compare to some of the other rigs in the price range. Look the part but as we know looks can be deceiving
I've not mate no, I'll look into them!
I’d like to hear about that pinball machine. Looks like a vpin?
It is mate yes! Sadly most of my viewers will not be as interested as you or I'd make a video.
You got the shifter mount in wrong way round , the long side is for forward and back not in and out
Perhaps... the manual is far from clear!
Hey Karl great review as ever! Any recommendations on a decent entry level motion rig? I've seen some on Amazon which appear quite cheap but have quite shit reviews too 😂 I'm guessing you'll say Next Level?
e racing lab, or sfx100, or sfx150, with a thanos controller
Motion rigs are over priced for the experience. I've a DoF 3 axis platform. While it's real good, the price is still hard to justify.
I recommend transducers if you aren't running them yet. Much better bang for buck and they enhance the driving experience more than you would think.
for this price you can ez diy the flexibility
Yeah you could!
That seating position will straight up destroy your neck after an hour or two
I'm 56yrs old and that looks like torture. What's wrong with Golf gti dimensions.
And that is still bigger than my budget 😢
Good sales pitch. Affiliated by any chance??
You're obviously new here! lol
Did you see me show you how wobbly the wheel deck is? How much the pedal tray flexes and say how uncomfortable the seat is?!
do you have any thoughts about the cammus c12?
I've not used one mate sorry.
is mainland europe already overseas?
If you had £1000 what full setup would you go for?!.....p.s for a PS5?!
PS5 Is limited so probably Fanatec.
what size is that tv on the wall
86"
You need a neck pillow
why is no one talking about r seat rigs
Avast flags this "could be a fake e-store" but no details why Avast thinks it's a fake e-store
Helpful!
There's no such thing as to cheap some have made their own setups out of spare wood they had a cheap used car seat and a lot of them are better than the crap you can buy
Yes there definitely is! Some things are so cheap they do not function as indented, or last one or two uses before breaking.... thats too cheap and there's plenty of that on eBay, Amazon, Temu, Aliexpress, etc.
can i use a full moza setup with this chair anyone?
There is cheap and good
Good'ish!
Too cheap for me is £50
Real men don't read the instructions, if there aren't enough pictures!))))
Karl is such a dewangus! 😂😅🤣
I was when that mic magnet flew off! lol
$400 US is not cheap
£265 is.
Does not look comy
If ur wheel wont stay solid... Its trash
You get what you pay for.
1:40 lol