Will My Car Battery Die from a Dash Cam? |Safe Drive Solutions
ฝัง
- เผยแพร่เมื่อ 28 มิ.ย. 2024
- Will My Car Battery Die from a Dash Cam?
Will My Car Battery Die from Installing a Dash Cam?
The short answer is no. A couple factors is, how you install it, and how you set the dash camera up. If you have a dash camera without low battery protection, and you do not drive your vehicle regularly. As a result, there is a good chance you will kill your battery. Dash cameras sold at Safe Drive Solutions all have low battery protection. We recommend setting this for 12 volts or higher to protect your battery. For this common question about dash cams, we provide an example below.
Once I had a client say the dash camera killed their battery. After investigating we found out they had been leaving their interior light on for quite a few weeks. There is lots of factors that can kill your vehicles battery, for example leaving an accessory plugged into your cigarette lighter all night. However, getting a bad cell in your battery or leaving the interior light on all night is more common. These types of things happen but getting a dash cam with low battery protection you should be fine. If you are still worried get a backup battery for your dash cam.
Watch our Dash Cam Install Videos
➡️ • Dash Cam Installs
Watch Our Videos Common Questions about Dash Cams
Common Questions About Dash Cams ➡️ • Common Questions About...
Will My Car Battery Die From A Dash Cam ➡️ • Will My Car Battery Di...
Dash Cam Top Features ➡️ • Dash Cam Top Features
Is A Dash Cam Worth It ? ➡️ • Is A Dash Cam Worth It
Will A Dash Cam Record License Plates? ➡️ • Will A Dash Cam Record...
What is a Good Dash Cam? ➡️ • WHAT IS A GOOD DASH CAM
Dash Cam Parking Mode.➡️ • Best Dash Cam Parking ...
Top 6 Dash Cam Features ➡️ • Dash Cam Top Features
What SD card to buy for your Dash Cam? .➡️ • What SD Card To Buy Fo...
Why Professional Dash Cam Install? .➡️ • Why Professional Dash ...
Read Our Blogs
safedrivesolutions.com/blog/
Learn More About Dash Cams
safedrivesolutions.com/learn-...
00:00 Introduction
00:53 What to look for in a dash camera
03:37 Cigarette Lighter Installation
04:20 Universal Parking Mode Cable Installation
05:36 OBD2 Installation
07:00 Hardwire Cable Installation
08:10 Powercell installation
09:12 Installation Errors
10:59 Improper installation hardwire cable
12:52 Cigarette Lighter Improper Install
14:01 Why you car battery might die
15:15 Truth of 24hr Parking Mode - ยานยนต์และพาหนะ
I know there's different variables that may persuade this answer (ambient heat, battery health, and various kinds of parking mode a user can select, i.e., Impact only, adjustable FPS, buffered, time lapse), assuming a hard-wire to the fuse box install, meaning, no power cell, then approximately how many hours (generally) can someone expect to get parking mode functionality assuming 12v is selected as the low voltage cut-off for battery protection?
Most videos talk about how many hours they can get with the added power cell but I've yet to find one that answers how many hours they can realistically (or ball park) get from just the car battery.
So I get this question a lot and there is way too many factors. Such as size of vehicle battery, whether your vehicle has 2 batteries, Do you have any other aftermarket accessories installed for instance GPS tracking. But generally what I find is that if you drive everyday and your battery is in good health.
Front and Rear Motion Detection / Time Lapse / or Auto Event Detection
3-6 hours due to the current draw on most vehicles (200-250ma current draw)
Front and Rear Energy Saving Mode (Impact Only) F790 / Q800pro / U1000
4-5 days plus (10-18ma of current draw)
Front only Motion Detection / TIme Lapse / Auto Event detection
4-8 hours due to the current draw on most vehicles (120-160ma)
Obviously all approximates. I do know some vehicles that will get a solid 16 hours with a 3 channel which is even more current draw then listed but those are generally 2 battery vehicles like a Diesel truck.
@@SafeDriveSolutions Thanks for the prompt and awesome response, greatly appreciated.
For my daughters' vehicles specifically (one goes to school, the other at work), I was basically wanting to figure out if the cam is hard-wired, would a 6-8 hr period of time be sufficient as-is or would I need to invest in a backup battery.
Your response was helpful, thanks again.
@@nothing_burger Your Welcome
Depends greatly on the camera used as some are power pigs. Blackvue and viofo use like 400ma
Fantastic video.!!! Everyone installing or having a dash am needs to watch this!!!!
I appreciate your thoroughness, Safe Dave!
Excellent video. Strightward, clear and easy to understand! Appreciate if you can test and tell me the parking mode current draw for the "GKU M11 4K mirror dash cam". Many thanks.
This is the most informative video I have seen. Now I can buy a proper dash cam. TY
Great info! Thanks M8. I also noticed your Lego speed champions collection in the back! Love those and technic as well.
We got like 40 lego + cars now. 😎
@@SafeDriveSolutions nice! I have a ton as well. It’s great to just sit back, relax and build
Great video . Thumbs up
Thanks, Dave!
Binge watching your videos, doing my homework before buying. I appreciate all the information ❤
Trying to release a new video by Saturday. So much editing. It will be called Dash Camera For Car. What you need to know….
@@SafeDriveSolutions if I decided to go with 6ch x2 a139pro-3ch do I need to get double parking mode cables
@@B_L Yes it is 2 different systems. Keep in mind 2 systems is approx 1.2 amps. which is a lot of current. It will not last that long in parking mode.
So glad this guy exist
Thanks. Helpful. 👍
Your welcome
I was sure my dashcam was suppose to shut off when the car was off but parking mode would engage for movement or shock. But it’s on all the time. It is hard wired. Advice?
This video explains motion detection and a lot of the confusion surrounding it
How Motion Detection Works On a Dash Camera
th-cam.com/video/m7ylz4oWdu0/w-d-xo.html
*I find a lot of dashcam comes prebuilt with a unit that cuts off at 11.6V and there's no way to change it... But I find that way too low and my power always dies. When I was using a Power Magic Pro with a Blackvue, I could manually set the cutoff at 12V and my car never drained to the point I couldn't start the ignition.*
Yes which is why we tell people we recommend against those units. But most people get clouded by I want 24 hour parking mode.
Hi, first thank you for the excellent videos, I purchased the Viofo 119 V3 and use it on my 2013 CRV 2 weeks ago with a cigarette lighter that is "ignition based".
You mentioned lighters without ignition based feature but not the ignition based cigarette lighter. My questions is, my dash cam turns off after I turn off the ignition.
Do I still need to disconnect the "ignition based" cigarette lighter when I get home?
BTW I purchased the Viofo A229 Duo with the HK4, but I have not installed it yet. I plan to have a professional install it. Will you plan to test the current draw for the Viofo dash cams?
If there a local Safe Drive solution site I would visit but there is not. Thanks for the great video!
I have tested current draw about a month ago and it is same as Thinkware and IROAD dash cams. If your cigarette lighter is ignition controlled you do not need to worry about it at all. It is mainly for vehicles that have constant power.
I hope that helps
1. Thanks for info. Really wish there was a DashCamSolutions in Southern California.
2. I just bought hybrid CRV & hear there are issues with dashcam & battery specific to hybrids. What are your thoughts.
3. Would eliminating parking mode be the best option?
Thanks in advance.
Our plan is to grow that big. Currently only in Canada. :) . Well you could eliminate parking mode or you could get a battery pack for dedicated parking mode, or lastly look at a energy saving mode dash camera like Thinkware U3000, U1000, or F790.
I got a Vantrue to install on my wife's 2023 Mazda CX-50 but the fuse box inside the cabin has all fuses constant power and I don't know how to install the hard wire kit so she can have parking mode.
Is there any advise about this that you can give me.?
Thank you
I can not safely give advice on that vehicle. We do them all the time. But we go directly to the computer wiring.
Been using obd2 for 5yrs never have problem with my battery
New vantrue kit has a option of 12.4 …its a matter if also tweaking settings of sensitivity in vantrue app/camera, on how often it will need the power.
Which cable and camera
@@SafeDriveSolutions vantrue x4s with their standard usb c kit.
Great video. Been using dashcams for 10 years awesome product. Quick question. See that a South African flag in back ground.
I am big into World Cup and European football.
Well Dave I beg to differ on what you said about teslas you can add a traditional obd2 to tesla's by going to Amazon and ordering a cam bus or a tesla obd conector wire converter that will use the daisy chian connection that will include a traditional obd2 split conector that's how you can get obd2 power gor a backup battery or dashcam
not sure who dave is.
I have just ordered the Viofo A129 Duo Pro & intend to hard wire it via a fuse tap in my 2020 Toyota Corolla which is a hybrid. This may be more of a question for Toyota but if my dash cam was to run the battery down which it shouldn't do as I intend to set cut off at 12v. But if it did would the hybrid battery kick in to help in either continuing to power the dash cam or assisting the cars engine to start?
That is definitely a question for Toyota. I recently was sent some information that possibly on my fully electric car the battery may kick in to charge my accessory battery. I still need to verify if this is true or not. My vehicle is a KIA though.
Hey in the video you said to check the fused power to ensure low-voltage protection is detected. I install my camera with protection, it does have constant power. What should I be looking for? Or testing in the fuse box? I do want it to be in parking mode.
th-cam.com/video/FpwC490QGl0/w-d-xo.html watch this video
do you have a video that show exactly step by step how to wire the viofo into the fuse box and which fuse ?
No we do not have that specific video.
se puede conectar una extension OBDII y allí conectar dos dispositivo.alimentacion para Dash camera y Dispositivo de cierre de ventana para coche, sistema de módulo de apertura OBD para TOUYOTA RAV4?
i am not familiar with cr window opening device. Can not comment on that
Sawadee krab sir OBD 2 best or not
I got a question, for hardwire, y in amazon i saw. 2 end. For constant power and ground , and there a 3 end , 1 constant power , acc. , ground ? Any difference?
we have installed a few of the 2 wire systems. I prefer the 3 wire as the 3 wire monitors for ignition and changes based off whether there is voltage on the line or not. The 2 wire system from my understand when it sees a drop in voltage it goes into parking mode. But we do not sell any of the 2 wire systems so i can not verify 100%
I am interested in installing a dash cam in 2023 C8 Corvette. Which dash cam with parking mode recording do you recommend and advise on installation?
What are you looking for in a dash cam? safedrivesolutions.com/ go to our website and check out our dash cam fit guide.
Keep in mind, the Vehicle's Engine Computer has a small power draw while Parked.
that is correct a lot of people forget this
I have been watchn few of your videos. Just got Viofo 119av3. Gonna plug into CIG lighter plug and it does not stay connected. It'll turn off with engine. My question is in settings. So if I'm just plug and play I can't use Parking Mode features? If that's the case here Then will I or won't I need to set anything in Parking Mode Timer? Park recording timer? Park motion detection? Parking G sensor? Time lapse recording? Motion detection? These are settings I'm not sure if I need or not and what to set them to. Can you help me with this? I'm mainly using it while driving to protect myself. Tia
You need the HK3 parking mode cable. for parking mode to work. However I do believe that if you are sitting stationary for 5 minutes parking mode will kick in on the unit. But the engine of course needs to be on for this to happen and the vehicle is not moving. I personally would not set any of the parking mode settings on that unit without the cable. But it is an older gen unit so there could be some settings I am unfamiliar with.
My dash cam has an internal battery. What would be the purpose of this, if I have it hardwired for constant power? Should I wire it to turn off with the ignition? Yes, it has motion detection, and impact. Parking mode must be turned on manually after you have stopped. I thing the motion detection only works with the front camera. When it comes on, I don't know if the rear camera records or not?
We do not sell any dash cameras with an internal battery. Can not fully comment on it. But I will say most of those batteries do not last long at all. Some of the units we have read in the manuals they last 10 minutes.
the battery is usually to allow the unit to save its current file in the event of the power being cut.
Mazda 2020 cx5 going with new Thinkware q200 2ch. OBD2 connection. Planning to use Thinkware 128GB Do you consider this a good dash cam for my vehicle? Will my battery have any issues? What can I expect of the parking mode performance? Thank you! You rock
I have a Q200 sitting on my bench hope to test very soon. Cannot advise correctly yet.
Excited to hear you will review it. Anxious to see your take on the Q2 hundred.
Is it possible for a dash cam to mess up the alternators voltage regulator? I had a vantrue dash cam in my Ford explorer. Went through 2 alternators and batteries due to the voltage regulator. Moved my camera over to my Lexus and sure enough, bad voltage regulator in it as well shortly after.
I honestly have never heard of that. Dash cameras draw less than an amp of current. But anything is possible.
OK I have a 2022 jeep gladiator. I have the Ring Dashcam installed. I also have an alpine I509 that I have with the dashcam is my question where are you located because I really would like to bring my vehicle. I would drive to you to resolve these technical issues pay very well for your services.
Hey Jesse what challenges are you having? Always happy to help. Feel free to email us info@safedrivesolutions.com
Do we have a way to hook the dash cam to a powercell that is being charged by the car, and if the powercell dies its fallback to the car's battery with voltage protection?
no the battery packs do not work that way
Can you get a obd2 installation kit for the viofo a229 pro that works without draining the battery?
th-cam.com/video/mRaR2my1aBc/w-d-xo.html you can make one
Thanks
What Dashboard camera do you recommend without parking mode? I only wanted for when I am driving after that I want the camera off.
Viofo A229 Pro if you want high resolution and only while driving
How are these issues different for a hybrid car? I bought a Vantrue N4 pro that comes with cigarette lighter but I am going to hardware it to my Camry hybrid but now I am kind of hesitating
VANTRUE has low battery. protection on their cable. But that dash camera draws a lot of current. I would not install it without a battery pack personally. Or I would look at getting their low. battery protection cable that has dip switch for timer parking mode.
@@SafeDriveSolutions Thank you! Okay I was thinking about that too. Do you recommend blackvue or ivolt for N4 pro? Also your store ships to the US?
@@tanvir6607 yes we ship to USA.
Keep in mind that unit on a fully charged battery pack will probably only get 12 hours approx of parking mode coverage. Battery pack takes 40-50 minutes of driving to fully charge.
We only do IVOLT.
Hello friend, I bought a dashcam from Xiaomi, which has a special cable for parking monitoring that is activated by being hit by a car. Do you know if this could cause me problems in discharging my car's battery by leaving it several days without turning it on?
Hello we are not familiar with that product so we do not want to comment on how it should or should not be installed. I do recommend checking with manufacturer.
Hi,
I have a gnet G on 2.
I'm just wondering, when i parked on my carpark. i usually turned it off cause im worried at my car battery.
It's currently set at 12.5V with LBP.
I'm just wondering, do i actually need to turn it off or i can leave it on when parked at my carpark?
Thanks a lot!
It will not last for that long in parking mode if that is what you are asking. If parked for long periods of time I would turn it off. If short periods of time like 1 to 3 hours I would leave it on but I would also set the timer for 3 hours for parking mode on the unit.
Will the VANTRUE 10ft Type C USB OBD Hardwire Power Cable with LED Screen, 3 Gear Shifting, Low Voltage Protection for Parking Mode. Will this work on the viofo a229 pro for hard wire connection?
No it will not work with Viofo
No
I put and installed a Azdome M550 dash camera.
okay
Hi Ben, I decided to get the Viofo A229 duo dash cam after watching your review of the Viofo A229 Vs IRoad X11. Now I'm having a problem when I hardwire it to my 2022 4th generation Mazda 3 - all fuses in the fuse box inside the cabin are constant power. Is there another way to connect the ACC yellow wire from other sources inside the cabin? Is it possible to just leave the ACC yellow wire alone since the unit has the voltage regulator to protect the battery from draining out? Any guidance is highly appreciated.
Glad our video helped you decide on dash camera.
So a few things here. 1. Yellow wire must be hooked up to an ignition or it will not operate properly at all. I know this for a fact because I accidentally 1 time hooked up yellow and red backwards as Thinkware, IROAD and GNET red and yellow are opposites and the dash cam would not record at all.
However that is also because the constant power was losing power(ha ha). So my advice to you is 1 of 2 things.
1. Find a shop familiar with how to hardwire as there is wires available to hook up but they require unplugging plugs at your computer, stripping back the wire, soldering, and taping the wire. (We do not share this information out as a lot of damage can be done if not done correctly)
2. Here is a video with fuse wiring layout for your vehicle I found online. th-cam.com/video/7kJ5KMZY_Ag/w-d-xo.html Also another tidbit that some times works. See all the fuse locations that are not being used. Test to see if any of those empty locations test as ignition. Lots of vehicles have an ignition in these empty spots.
@@SafeDriveSolutions Thanks. Looks like the only option for me is to find the suitable wire to hook up as the empty unused fuse spots don't have power connected.
@@Jackyho111 does your cigarette lighter test as ignition or constant power?
If it tests as ignition tagging onto back of that is usually a great idea if you can get access to ot
@@SafeDriveSolutions The cigarette lighter is ignition. Just have to take off the centre console to get access to it. Thanks 🙏
My car Mazda cx30 SP 2021 I need try OBD 2 port . Possible if your recommend sir. because i thinks iroad support sir
Hello there. I’m getting a229 pro 3 channel install this Friday. I drive a 2019 toyota corolla LE.
Should I be wary of the battery issue for parking mode?
Should I buy another battery?
depends on how long you are expecting the parking mode to work. If you are only looking for 1-3 hours. set it for 3 hours or less and minimum 12 volts low battery protection and you should be fine. if you are expecting it to record overnight or for longer periods of time a battery pack would be agreat an investment. Keep in mind to test your factory battery to see how healthy it is.
@@SafeDriveSolutions thanks for your reply. I guess if only uses for incident purpose parking only instead of overnight or all day recording. It should be fine.
@@Ericteoh25 it does not work like that. th-cam.com/video/JhtTD-_2Wo0/w-d-xo.html and th-cam.com/video/m7ylz4oWdu0/w-d-xo.html
Hi, I have a Mazda CX-60 mild hybrid. Will the dash cam drain battery? I'm reluctant to buy a battery pack. Please let me know. Thanks.
Depends on dash camera and installation. Settings and etx
@@SafeDriveSolutions Thank you. I'm watching and learning. Your videos are very helpful.
Everything you say his phone at door for me I got multi batteries are you going to 450 app alternator also use solar panels you can put on your car you are qualified to do Jack schitt
No idea what you are saying. Do you have a question? I am assuming you have experience with a lot of the cheaper dash cameras with very low battery protection?
Can you plug and unplug your dash cam so it wont ruin you battery but would it damage the dash camera?
Yeah you can unplug the dash camera. You can also have it wired to only work while driving if you want.
@SafeDriveSolutions Thank you appreciate the answer 🙏🏾
I recently bought a dash cam, and now I want a power outlet to operate the camera. What is the best portable battery that can work when the car is parked without resorting to the car battery? Thank you.
If you are looking for a powercell I would recommend looking at Blackvue B-124X, Cell link Neo, Thinkware also has a smaller one. These are only units we have experience with.
@@SafeDriveSolutions Thank you, but how many hours can it work and how can it not work when driving so that it does not work both together and how can it start automatically when the car is parked.
@@YounesNex So the way a powercell works is a few ways. 1. You plug it into a cigarette lighter of your vehicle that only supplies power with switched ignition. While driving the powercell will charge up. This takes approximately 45 minutes to fully charge the powercell. One you turn vehicle off the powercell will no longer charge and turn to parking mode. The dash camera enters parking mode and will power dash cam until the powercell is fully discharged. One completely discharged it will turn off and it will not turn on again until you start the vehicle up again. Hence starting the process all over again of charging it up.
@@SafeDriveSolutions ,,Indeed, you are right, and what is your opinion of the power bank from Anker 26800 mah
@@YounesNex so you are thinking about using a portable power bank? Never used it so I dont know.
Is red tiger dash cam good?
Viofo A139 Pro vs Rove R2 4K vs Red Tiger F7NS Dash Cam Review
th-cam.com/video/5EcITSNBQ6A/w-d-xo.html
I made a mistake and wired both wires on always on fuse, end up killing two batteries 😢
That sucks.
Anyone tried Azdome M550 Pro?
we have not
@@SafeDriveSolutions will you try?
hi, I have dashcam with low battery protection (around 12v) and time limit (6h), I drive 2x30km daily, but after some time my dashcam started to turn off a few moments after turning off the car :( should i test my car battery and alternator ?? what is the best type of car battery to use with a dashcam
Hello @blackJoxer not sure where you are located but in Canada there is a lot of places you can go and get a free battery test provided you bring your battery inside. They can find out what the CCA or Cold Cranking Amps are and give recommendations on whether or not your car battery needs to be replaced. Over time car battery will need to be replaced. In terms of which car battery to use I would recommend having a powercell which is independent from the battery and will power the dash camera seperate from the battery but will charge while driving.
@@SafeDriveSolutions ohh, you just made me think of something I have never considered. You mentioned car batteries needing to be replaced every so many years because through normal operation (whether connected to auxiliary devices or not), they eventually stop holding a charge and die (or decrease in CCAs to where they can no longer turn an engine)
What then is the life expectancy of these stand alone batteries? At the premium they command (north of $500 in some cases), depending on their life span, one could argue it's more cost effective to simply use and replace regular car batteries when they do go and most come with several years warranty that most likely exceed those of the power cells.
This topic/analysis would be a great discussion for a future video provided you've not done so already.
@@nothing_burger It is a great idea. I will have to see how much time I can get to do some of these tests. Everytime I do the current draw tests they are very time consuming. However it is good for me to know what the current draw is on all the dash cameras. It is always easier to explain to customers when you are well informed.
why set battery protection to 12v if you have 12.3?
If you set it to 12 volts you will get longer to record on parking mode typically. You are more then welcome to set it to 12.3 volts. It is up to the user. I just recommend not going below 12 volts due to all the computers on newer vehicles
@@SafeDriveSolutions
Hello I just purchase the Viofo 229 and hardwired it today myself. For some reason, when it enter the parking mode with auto detection event , it recorded in my garage a few of 45s clips a few minutes apart even when there is no movement and no light, then it just turn off completely. Sometimes, it only recorded one 45s clip then turn off completely. I tried to switch to the 5frame/s mode and it just turn off after like 20 30s.
I wired the battery wire to P/Outlet no.1 fuse (this one has constant power when the car is off when I check) and
the ACC wire to the P/Outlet no.2 fuse (only power when turn on).
I tried the battery protection with 12v, 12.2 and 12.4, they all have the same problem.
I'm not sure if it is because I used P/Outlet no.1 for battery wire, but it did record a few clips of 45s each a couple of times. Should I switch to the Power seat fuse 30A?
btw only the front dashcam is installed.
@@Dark_side9999 There is a lot packed in here and I will try my best to answer you. 1. Parking mode will activate while parked with ignition on. So for instance if I pull to a coffee shop and I am sitting in my car for 10 minutes not moving at all. After 5 minutes the dash camera will go into parking mode automatically because the G sensor is sensing no movement. Not sure if those are the parking mode recordings you are seeing or not but that is an example of parking mode recording with no impact or motion to vehicle. 2. I do not know fuse locations of your vehicle and we also do not give any advice on where to go for power for liability reasons. But to give you some insight. Dash cameras draw less than 0.25 amps of current. So it draws next to nothing in current. What I would recommend doing is getting a mutlimeter and measuring 3 things. 1.) measure battery voltage on battery under the hood 12.0 volts or whatever number you get at battery. 2.) measure battery voltage where you got power for dash camera 3.) double check your connections because a lot of videos people tell everyone to butt connect the connections or ram the wire in and use tape to hold it in place which in my opinion is all wrong. It should still be a solid connection which I personally like to solder but that is me. If you find with your vehicle turned off that the battery voltage is lower than 12 volts good chance that is why you are not recording while parked. I hope that helps.
I see a Brazilian flag on back. Do you speak Portuguese?
No i do not speak Portuguese. I like world Cup Football.