How to prep brick wall & wooden floor for tiling - Bathroom Renovation PT 8
ฝัง
- เผยแพร่เมื่อ 5 ส.ค. 2024
- Today we talk about how to prepare brick wall & wooden floor for tiling in my bathroom renovation and refurbishment project DIY! We prepare brick wall and floor for tiling using hardibacker and plywood.
🚀 LEARN PLUMBING ONLINE IN MY STRUCTURED COURSE (50% Before March): www.learnplumbingonline.com
🛠 AMAZON TOOL STORE: www.amazon.co.uk/shop/plumberp...
🥾 10% Off my workboots + workwear Use Plumberparts10: www.bigboots.co.uk/discount/p...
👓 10% Off Safestyle Sunglasses Use PLUMBER10: safestyle.com.au/?ref=PLUMBER10
Learn Plumbing Online is perfect for future apprentices, homeowners who want to understand and tackle more plumbing jobs in the home, handymen who keep turning down the odd plumbing job and more. With practical follow along video lessons and discussion board you can boost your knowledge in my amazing trade. Sign up now: wwwlearnplumbingonline.com
I'll show you how to fix hardibacker board to a brick wall.
It's really important to get a solid, flat surface to fix tiles too when doing a bathroom refurbishment. I'm using hardibacker (known as hardi) on this brick wall to get it ready to tile. I'm also going to show you how I prepare the floor for tiling using plywood, glue and loads of screws. Before finally tanking the floor using Impey's wetroom floor tanking. I hopw you enjoy this video!
Timestamps:
0:00 Installing bathroom lights
0:59 Planning IMPORTANT HOW TO!
2:37 How to measure the floor and cut the ply
6:50 How to fit glue and screw the ply to the floor
9:39 EXTRA Getting the control wire in for the digital shower
11:59 How to fit hardibacker to a brick wall
15:08 Impey Tanking
#BathroomRefurb #PlumbingAdvice #DIYPlumbing
TWITTER🐤 www.plumberparts.co.uk/social.... 🔥
FACEBOOK👉 www.plumberparts.co.uk/social.... 🔥
INSTAGRAM📷 www.plumberparts.co.uk/social.... 🔥
SNAPCHAT👻 www.plumberparts.co.uk/social.... 🔥
PLUMBERS REGISTER HERE: www.plumberparts.co.uk/tell-me... ❤️ - แนวปฏิบัติและการใช้ชีวิต
![CAMPปลิ้น | EP.79[1/2] แก๊งไทบ้านพาบุกเมืองบั้งไฟโก้ ยโสธรรรร!!!](http://i.ytimg.com/vi/Ldr3_fvTEXk/mqdefault.jpg)
I am a training plumber and Tiler and these videos really help thank you for your tips
Many thanks for not only the great advise, but the entertainment.
Thanks James
Your videos are a god send fella.
I have 3 en suites, bathroom and WC to refit and all with your advice close to hand.
I've refitted a bathroom before, but this time it's the whole house!
I really will be trying to reach that "creme de menthe" in my fav. vest!
Have a beer on me and thanks for all the videos.
Stu from Rugby.
Enjoying the series of vids….. heat work Jim
Love it🤩 Tuned in to see some plumbing, and stay tuned to see some carpentry😆😎
Thank you teacher 🙌🙌 awsome job and great knowledge
Brilliant thanks👍👍👍
Looking good Jimmy! Get that rubber ducky ready Em!
class to watch mate
for dealing with movement its recommended that ply on a floor shouldnt be any less that 25mm if tiling on top, 9mm is too thin. This is why its better using a cement board like hardibacker as you can use 6mm meaning you dont have a ridiculous height difference in floors as you go from one room to the next
Another great video, i just wanted to ask if you could use the hardy board on the floor instead of the ply. And could you then tile straight on top of the hardy board? Thanks
I would fix Hardie boards to the wall on timber frame instead of using adhesive, because any tensions within a brick wall can migrate and show up as a crack on the tiles.
Thanks!
Love a good podcast while I work👍 james english and shaun attwood have good crime pods if yr interested. Once you use sbr you won't use pva ever again
I get a lot of comments on my videos if i connect compression fittings to plastic, but ive never had an issue.....refreshing to see you also do it aswell.
I've done it for years with iso valves, nothing wrong with it
As john guest say you can do it( with the correct insert) I can’t see a problem.
M J Tiff Plumbing fuck what anyone else thinks, we are all taught differently but end up with the same results which is a happy client or customer. You don't have to prove anything to anyone you're a cracking plumber and your videos clearly show that.
As a DIY'er I do this, using the right inserts of course. Some PTFE around the olive as well and all is good.
Watching the series and enjoying it even though I actually fit bathrooms and kitchens for a living 😂😂 one thing I wanted to check with you. I was always warned about using PVA to prime walls for tile adhesive. Your thoughts? PVA is the cheaper option but I’ve just always used tilers primer whenever using tile adhesive on tiles or backer boards etc
Never use PVA to prime the wall. www.tilersforums.com/threads/pva-not-suitable-as-a-primer.74109/. Just read the instructions on the packet. It will tell you exactly what you need for each substrate.
Hammer in fixings with a thin insulation washer on top, doddle, and no worrying about marking the boards up
Thanks
Another great video James. I'm watching this series as I have the feeling I will be doing my parent's bathroom soon. If I was fitting the Hardiboard, I think I'd use concrete screws. These just need a pilot hole in the brick that can be drilled with the Hardiboard already stuck to the wall. Once you've got two screws in, the board is locked in place. I reckon that this would save a lot of effort trying to keep the Hardiboard in one spot while drilling the holes for plugs. And I will be sending some thanks ($) your way, you have helped me immensely over the years.
When you concrete screws do you mean frame fixers?
@@Nohandleneeded101 No. When I said a “concrete screw” I mean a screw that is designed to cut into concrete using its own thread. You could use frame fixers in the way I was suggesting.
@@tlangdon12 what brand would you suggest?
FYI is Possible to wire in flex- flat t & e is in the standard (BS7671 18Amd2) but so are many other types of cable witch can be used.
Instead of silicone on the joints I would probably use an alkaline resistant reinforcing tape (like scrim tape) then layer adhesive on it will stop movement in the joins unlike the silicone! 👍
Great vid but extra info comments like this really make it comprehensively helpful. Just did what the vid said and what you said for the joins today. Thanks!
James love your videos, I am about to tile my bathroom, I have installed new 22mm claberboard glued and screwed in the rest of the house just the bathroom to do, the tile shop say to use cement board, but this will make it very high. Can I just put the membrane you used on top or should I drop to 18mm and use the concrete board. There is no shower in this room just a freestanding bath. Thanks for your help. Rick
Great video James but also that gap around the edge would act as an expansion gap
Hey James after some advice please If poss, doing my bathroom like yours there fairly small. Anyway all plaster is gone, 1930s house, it's all brick wall then one wall neighbouring with bedroom with cinder block😞. If I wanna do with walls with the lam/acrylic t&g panels, is it best to plaster board or can I use that hardiebacker stuff then put the lam boards on that?. Also what are you putting on the floor or what would you recommend? Cheers Rick
It's nice to see you going to the effort of tanking it, go to so many buildings with water damage after refurbs (since 2018) that haven't tanked even though showers and baths now require it as per regs. Sadly it's not advertised to the public so quite often the standard plasterboard and tile is still used and those are the quotes people go for because it's cheaper, then regret later.
Hey james what do you recomend putting down for waterproofing cement floors to avoid mould or condensation build up? Would the impey sheet be ok?
Quick question: for the backer board, I didn't see if it had to be leveled? Was it?
Hello From the Philippines
Hi what your thoughts on Schluter ditra if used on good stable chipboard floor instead of plywood? The only reason I don't want use plywood because it will create big high difference if floor? Thanks
It's 8:30 am and my Man is already grinding. 🤘
"Oooh, Matron!"
What the hell have I just stumbled across in my pants on a Saturday Morning. Very informative, an excellent teacher/instructor 👏.
I love DIY and will use this channel for study from now on. Subscribed!
Top boi!
Did you remove all the floor boards and added like a big floor sheet in pieces, then added another layer in 2 pieces. Could a resin stone shower tray, be seated and secured on top of need be?
We want to tile the wall next to/behind the bath to a height of approx 350mm. Slight snag, the wall is really uneven and needs lot of prep and I'm lazy. So my brainwave is the glue the tiles to wooden boards then glue the boards to the wall.
What kind of adhesive do you recommend? Thanks.
If anyone is watching this don't use ply on floors. That's old school and not recommended any more as we now use cement boards like hardie backer. 6mm cement board has the strength of 18mm ply so saves 12mm height, does not expand or contract like ply does and is 100% water resistant. Easy to install, just screw down as you would ply. I cut it easy using a grinder, large cuts can be scribed and snapped
💧Next video in this series is first fixing the most annoying bath tap in history. Thanks Emily!
🍺 *JOIN THE* Alearmy *_Exclusive weekly live videos on Thursday_* : th-cam.com/users/plumberpartsjoin
🛠 *ALL OUR TOOLS ON AMAZON* www.amazon.co.uk/shop/plumberparts
📺 *VLOG CHANNEL:* th-cam.com/users/timeswithjames
Can you use anything other than imey Water guard?
What’s wi the 60mm holes for the rad pipes James 😂
Hi there. Great work and info. What screws are you using to secure the hardybacker to the solid wall? Are you using a rawl plug. Thanks
I want to know this too. They didn't look like concrete screws but also he didn't seem to use plugs
What’s the stuff you’re putting down on the floor?
Hi James, great video as always
I’m planning to take plumbing as a college course next year after my exams
Is there any advice you could give me as a heads up?
Train as a spark instead.
the chipboard floor looked very cut up i would have lifted it and put down 18mm plywood and 40mm screws and screwed into the joists and plastered the wall with sand cement rubbed up and flexi adhesive for the floor
I'm no plumber or tiler so just wondering- do you always have to have that backer board in the bathroom? Can you not plaster like you would a normal room and then tile on top of that? Thanks.
you could but not onto fresh plaster, usually have to wait at least a month before you tile onto new plaster
What is the thickness of the wood under the ply, and the ply itself?
Please could you do a tools tour
God love the poor bollix that ever has to lift that floor in the future. Tanking membrane and 2 layers of ply that are screwed and glued together😂😂
Now I'm (bad?) famous 😅
I did not ever say that you're miserable of course but it's good to see you take our remarks under consideration. Doesn't this vid look much better with your face on it? 😁
Another portion of good, well explained and spiced with hint of humor do-it-yourself-it's-not-that-difficult 👍
Haha! Cheers man. In there tomorrow getting the bath taps sorted!
Have you ever used Marmox boards before James? I was in a dilemma between them and hardiebacker boards but went for Marmox and gave to say they’re very easy to work with and they come in all shapes and sizes
I love these boards, they’re light and easier to work with than plasterboard.
Do you rate WEDI board?
Nothing wrong with using flex for wiring, it’s just not the norm. Probably because it would cost a fortune over t&e 😂
Can you tile over bonding coat or is it best to use tile backer ?
No, you can't tile on top of bonding coat. You can tile over the finishing coat if you wish.
I cant figure out how to increase the thank you amount?
is this video out of order?
Don't worry about the moaners James. Was actually quite nice not seeing your face for a while 🤓
Good work on sharing your knowledge and skills 👌. I am a plumbing student and I sent lots of time watching your videos. Please do a video on disinfecting the pipes before handing over to the customer. Thanks
What’s the song?
Great vid but hate hardibacker board.
Great video James but it bit to bright 💡💡😂
Please never ever use PVA as a primer for tile adhesive. Use the recommended primer. PVA acts as a barrier on the walls and the adhesive will stick to the PVA and not the wall. A few years later the tiles and adhesive will fall off the wall. I've seen plenty of bathrooms where this has happened leaving a clear wall after tiles came loose. I appreciate the boards are also screwed to the wall which will give it a good solid fixing.
That’s why I use SBR. NEVER use PVA!
6mm No more ply on floors
2 mates, couple of pints then 4 bottles of wine, bloody hell haha - I bet your brain was shrunk down 50% in the morning!!
And that was a Thursday night. Christ knows what happens in Cambridge on a weekend.
8:25 Why did he not draw rude body parts? I always do something creative with the squeezy stuff
Tad too bright mate…..
The fuck... wiring shit randomly and relying on the comments to point out building/electrically regs violations
tiles are so dated for bathrooms now, would of thought you might of used something like some nice upvc wall boards that look much cleaner and more modern with no future hassles with grout issues.
still nice to see some progress on the bathroom.
Plastic wall boards🤣 its not a caravan mate!
Plastic looks cheap and horrible
Haha you must be winding us up
He did a previous video installing these panels. They’re good for rental properties, but they’ll always be a budget option vs tiles. Just look how much you can spend on tiles vs panels.
Hi anychance i could have an email to contact you about an issue with your website?
Thanks
Thanks!
Cheers dude! 😎
Thanks
Thanks
Thanks
Thanks
Thanks, from a gay fan with a massive crush on you James 🍆 👊 💦
Thanks
Thanks very much!
Thanks
Wow Richard! This is mental mate. Thanks so much! If you get a mo, think about joining the Ale Army too. Live stream tonight at 6:30pm with sneak peek's of next week's video AND MORE! Just click the 'Join' button from any of my videos or channel. Cheers bro!
Thanks
Woooo! Cheers man!