IoT Based Water Level Control & Monitoring System with ESP8266 & Blynk
ฝัง
- เผยแพร่เมื่อ 24 พ.ค. 2024
- 𝗣𝗿𝗼𝗷𝗲𝗰𝘁 𝗗𝗲𝘀𝗰𝗿𝗶𝗽𝘁𝗶𝗼𝗻:
In this project, we will build an IoT Based Water Level Control & Monitoring System with ESP8266 and Waterproof Ultrasonic Sensor. We can monitor the water level on Blynk Dashboard.
An Internet of Things (IoT) water level control and monitoring system is a smart, automated solution to manage and maintain water levels in various applications such as tanks, reservoirs, and swimming pools. These systems use IoT devices, sensors, and cloud-based platforms to collect, process, and analyze data. This information is used to optimize water usage, prevent wastage, and provide real-time monitoring of water levels.
This project effectively addresses the issue of water wastage and maintains optimal water levels. Utilizing the ESP8266 WiFi Module as the primary controller, the system manages all electronic components and executes actions based on WiFi network connectivity. The JSN-SR04T waterproof ultrasonic sensor, positioned at the top of the tank, measures water levels. A 0.96″ I2C OLED screen displays these water levels for easy monitoring.
The device can operate in either manual or automatic mode, with a relay included in the circuit to control the water pump’s on/off state. Users can observe and manage the water level and mode control functions through the Blynk application, ensuring efficient water usage and conservation.
𝗦𝗼𝘂𝗿𝗰𝗲 𝗖𝗼𝗱𝗲 & 𝗪𝗿𝗶𝘁𝘁𝗲𝗻 𝗧𝘂𝘁𝗼𝗿𝗶𝗮𝗹: how2electronics.com/iot-based...
....................................................................................................................................................................................................................................
Drop a like if you liked this video.
Don't forget to subscribe to our channel for more Electronics projects and tutorials.
Website: www.how2electronics.com
Facebook: / howtoelectronics
Instagram: / howtoelectronics
Twitter: / how2electronics - วิทยาศาสตร์และเทคโนโลยี
Another amazing video 😍😍 thank you so much for sharing such a useful video ❤
Nice project 😮
Nice project
Hey .. is it turns the pump on when the water level is low?
Great Video.
I am interested to build the same to track 3 tanks.
Thank u 🎉
The thing is overhead tanks are usually located at third or 4th floor, so connecting the sensor and rest of the circuit is not practical, so consider adding nrf wireless modules to make it complete. Willbe waiting for v2.
Yes this can be done. Perfect example. I can try this in future for sure
Brother it's possible ultrasonic sensor wire only 4 so using CCTV cable is chep so connected to that 4 wire board in your home
I did it in 2019 with Raspberry Pi and Pi4j as a subtask in one of my project..
Instead of Push Button, how can I add touch switch (ttp223) to circuit? any diagram for that?
i'm facing issues in arduino ide code/libraries! what should I do?
hello i have made the whole project as shown but my relay remains high for both conditions please help
❤❤❤❤
The sensor does not work properly, we had ordered the sensor, the quality is poor .
Can i use Arduino UNO insted of ESP8266
👍 😮😮😮
❤❤❤
Can I connect 9 v batter instead of 240v AC
Can we use this sensor for larger tank(30 feet deep).
The maximum distance it can measure is 600cm.
Hello mam, i am also trying to make same kind of project but in my project inust want to use relay, ultrasonic and nodemcu and i have to turn off the motor when the bucket is full can you give any suggestion to me how to do it
And also i have to use blynk to check the water level and control the motor
@@kamleshgorade5699 see if the blink some automation triggers so that can trigger a event to turn off the motor using relay or look for mqtt protocol
the code to apply the node Mcu but the ofline
Code error madam .
Error compiling for board nodemcu 1.0 (esp-12Emodule) showing how to slow this problem madam please tel me
disconnect the mcu from the circuit and then add code
In the real world, closed water tanks generate a lot of water vapor that results in condensation (water droplets) forming on the ultrasonic sensor. This results in incorrect sensor readings. Please think about a way to prevent condensation on the sensor.
It's " How to Iot " 😂
our bhi teji se dikhao na.......😐😡😤