Automatic water level controller using arduino | Water tank level monitoring system with Ultrasonic
ฝัง
- เผยแพร่เมื่อ 11 มิ.ย. 2021
- Let's make a device to control the tank AUTOMATIC. The screen here shows the amount of water in the tank.You can also activate the water motor at any time and fill the tank as per your requirement.
This channel to share exciting videos of Arduino projects,Electronics and electrical easy diy projects to share with you I hope this projects will be helpful for you to create something new .
Do not Forget to like comment and subscribe my channel.
SUBSCRIBE LINK:-
Arduino Code for practical test(18cm) :-
www.mediafire.com/file/jnzwds...
Arduino Code for real water tank :-
www.mediafire.com/file/qxdki3...
I2C LCD Display Library :-
www.mediafire.com/folder/9wqr...
Circuit Diagram :-
www.mediafire.com/view/5hdt3u...
My Other videos :-
1. How to control DC motor and Stepper motor with L293d motor driver Arduino
• How to control DC moto...
2. l298n motor driver with control DC motor & speed control unipoler & bipoler stepper motor
• l298n motor driver wit...
3. servo motor arduino
• servo motor arduino |...
4. Top arduino projects 2021 for covid 19 | coronavirus protector | Sterilize Stationery
• Top arduino projects 2...
5. NEMA 23 | NEMA 17 | NEMA 34 with TB6600 stepper motor driver and Arduino
• NEMA 23 | NEMA 17 | NE...
6. How to Build a Low-Cost TH-cam Studio
• How to Build a Low-Cos...
7. How to use W1219 Temperature controller/DUAL Display
• How to use W1219 Tempe...
8. How to make an LED VU-meter using Arduino.
• How to make an LED VU-...
9. LED chaser with 32 effects |led patterns with Arduino | Code in Discription
• LED chaser with 32 eff...
10. How To Make Automatic Touch Less Non Contact Water Tap At Home/office
#Waterlevel #Automatic_water_tank #arduino
How To Make Automatic Water Level Controller,ultrasonic water level controller,automatic water level controller,water tank automatic filling system,automatic water tank level controller,water level controller sensor,electronic water level controller,automatic level controller,automatic switch for water tank,water sensor switch for pump,water level controller switch,water level controller system,Liquid Level Control Switch,Water Tank Overflow Controller
Automatic Water Level Controller Using Arduino PLC,Controlling Water Level in the PLC Ladder Logic Program,water level controller
installation,How To Make Automatic Water Level Controller,Fully Automatic Water Level Controller,PLC water level control,PLC AUTO PROCESS IN TANK,Automatic Water Level Indicator and Pump Controller using Arduino,Automatic Water Pump Control,how to make automatic on off water pump,best plc project,awesome electronics project
water level indicator project,wire sensor arduino,water level sensor,wireless water level indicator,dry run protection for water pumps,arduino ultrasonic sensor,arduino pump,arduino water level,automatic water pump,water level sensor project,level sensor,water pump automatic control,automatic pump control,water pump arduino,arduino water sensor,water tank sensor,arduino water level controller,automatic water level controller,Contact Type Water Level Sensor
water level nodemcu,water level nodemcu project,water level nodemcu code,water level nodemcu with blynk,water level indicator,water level controller,nodemcu with water level monitor,nodemcu with water level,water level system,water tank level monitoring,esp8266 with water level monitoring,esp8266 project,eps8266 with water level monitor,water tank level with nodemcu,water level monitor with iot,blynk app with water level,nodemcu,esp8266,water,blynk, - วิทยาศาสตร์และเทคโนโลยี
![[Live] : ONE FIGHT NIGHT 22 วันนี้!! "สมิลลา vs นาตาเรีย"](http://i.ytimg.com/vi/Hmzh7heFvx8/mqdefault.jpg)
Excellent work. Can you tell me where the nubber in the formula (110) came from????
Bro where did you connect the last water pipe
Sir if I use it in bigger tank then what changes we have to do?
thank you for the video, just tell me why you didn't use the simple water and it's with the colored water that you used.
sir why my lcd error when the relay got loads?
but if i dont connect to load the system work well
Bro what is the connections of tank
after long research we have a new technology to send data over dc lines so no need to connect 4 wires of ultrasonic module just use same dc line between module and MCU to supply module & get data
Bro this coding shows some errors
What if we skip relay module?
sir if I use in the bigger tank then what changes we have to do??
Manuval setting in tank overfull relay cut off possible yes/No
Sir kindly provide the links of libraries
Can I use float sensor in place of ultrasonic sensor?
thanks so much, this is the video i was looking for to help with my gardening project. Will this sensor be able to hold up to small sprinkles of water, or do you think there is a better sensor that is more waterproof?
Thank u....
@@slideas1 sheesh hudidjz
You can use stainless steel wire probes as ground contact sensors, I used three wires, set with ground, low level, and high level. When the wire contacts the water the Arduino input voltage will drop, and that detection can be used to turn the pump on and off.
Bro how to place a switch to confirm to fill the tank when the display indicates water level is low... plz reply bro
where u have connected the black covered wire(from 220V AC) ?
what kind of adapter did u use?
It wasn’t for the pump it was for powering the Arduino and circuit board
how could i get complete circuit?
What if I want to have two pumps? What changes can I bring in?
Whete did you connect the 220 VC
thank u sir
Welcome
Does it have fluctuations
what is the function of the EEPROM library.?
We can fit it in the 1000 litre tank or not
what is the maximum range of that an ultrasound sensor?
.2m - 4meter
is this working on an actual solar pump?
sir Where can I get this programe code?
I use led instead of pump and it worked and not worked with pump can you explain me please
no matching function for call to 'LiquidCrystal_I2C::begin()
Please can you help me
My project is vehicle fuel theft monitoring and calling system
These are the component I have used
Arduino uno
GSM sim800l
Ultrasonic sensor
Working principle
If the flow of the fuel in the tank increases than the normal flow rate
What is the indicator when the lamp is on/off??
ගොඩක් වටින වීඩියෝවක්..
ඉස්සර නම් ඉලෙක්ට්රොනික විද්යාව සම්බන්ධයෙන් පොත්පත් තිබුනා.
ඒ අඩුව පුරවන්න මේ වගේ අනර්ඝ වීඩියෝ දකින්න ලැබීම ඉතා වටිනවා..
ගොඩක් ස්තුති සහොදරයා..තමාගේ වටිනා කාලය වැය කොට ලබාදුන් අදහසට ගොඩක් ස්තුති.
Bro this code is not working
Showing an error
what is work of mini push button?
Sir programs file download nhi ho rha hai. Help kijiye download karne me. Plz reply me
Sir can you please make one which makes use of 4 wires as sensors and the display shows percentage as 25% 50% 75% and 100% and rest auto and manual feature remains same... I would be really grateful if you could make that one because it is more convenient to install because ultrasonic sensor gets damaged by water vapours. Hoping for a quick response.
can i base this PID based project?????????
I have display only how to use it
I tried this project and added library module the Ultrasonic sensor is working fine but the 16×2 lcd display is not working its shows just green screen 😑.I bought the lcd and i2c module separate and I didn't do soldering screen because its risky if i do a single wrong step the whole machine is gone so only pls give suggestion whether i do it myself or get help from professional is it necessary to get the display of the screen or you can get the screen without soldering i tried putting the ic2 module in multiple ways but it didn't work pls reply 🙏
just rotate the screw in the i2c module and see is the word visible or not.
@@arpansrivastava6405 Thankfully now it visible after soldering but there is an error in code sometimes water level switches between 0 to 110 real quick I don't know how to fix this 😅
@@sairam-786 can u share the code pls I really need it
Hello brother. Thank you for the great video. What is the distance used for the tank you used? How can I change that distance, if I want to use a much smaller tank distance? Help will be appreciated. Thank you !! deserved like.
Hello brother, thank you so much for the video it has been helpful for my school project but I am having issues with the LCD display screen nothing seems to be showing but other components are working
Check the lcd address
Rotate the screw on the i2c module
750liter set val details
which software is this?
hlo sir plz link provide for ppt for the project
Inside tank water vapour is very high...can ultrasonic sensor work in high humidity condition?
Use a waterproof ultrasonic sensor not the one showed on the video
@diyprojects5767 i have done this but the sensor isn't functioning. Is it because of the coding or something else? The sensor is newly bought JSN-SR04T
Sir please send me the code of project
The link is not working.
Dear friend, thanks for beautiful project, let me know can I change ultrasonic sensor with water proof ultrasonic sensor, if yes then please tell me changes in circuit or code
sir i buy these project can you sell to me
Izin tanya bang punya saya sudah bener upload codinganya tapi kok sensornya ngga mau gerak ya ?;
how can we connect program
Ask you guys, and the host: Are the codes in the links FREE? What is the cost for the hardware system? Thanks.
Pls pls explain source code one time
I connect the bulb to relay but is not working.any one suggest me what can i do for fix this problem?
Can i get this complete device from you?
Sir plz can u say which software is used for simulation circuit and its code
Fritzing
Bro I don't have display circuit
Can you pls support to share the code for OLED display with 4 pins
HLO BRO HELP ME CODE IS NOT WORKING
THERE IS AN ERROR
Bro i am getting lcd.begin eerot
i really wish you put at least subtitles in the video if your not gonna talk, I didn't understand what's happening especially around the time 10:08
hi can you please tell me which pump did you use fror this
Bro I am getting lcd begging error
CAN WE BARROW YOUR DIAGRAM TO USE IT TO OUR PROJECT IN CAPSTONE? ☺
Ok
Ultrasonic sensor range
having error in uploading
error statement = Sketch uses 4710 bytes (14%) of program storage space. Maximum is 32256 bytes.
Global variables use 325 bytes (15%) of dynamic memory, leaving 1723 bytes for local variables. Maximum is 2048 bytes.
were you able to fix it? if so, how?
Please provide me the code for this project.
Please add dry run protection and would this work for 2 capacitor submersible moter pump?
th-cam.com/video/Lag5WkdKx1M/w-d-xo.html
See this video u r problem will be solved
I have a system usning SRO4 sensor for sabmersible and 1 hp moter if you need plse contact me
Hi dear appreciate your effort.
I have a question that.
When the unit power up ,relay on and off , two or three times faster ,then it's steady working ok. If possible please solve it in the programme , add delay programme for relay powerup .
Thank you so much for your comments
change the relay pin. Don't use pin 13 for relays because it has an LED indicator. It always blinks a few times when the Arduino powers up.
Thanks for the informative video, but can you add 2.4ghz wireless modules for transmission of ultrasonic sensor data? It will make the system wireless and those modules are also very cheap, i jave overhead tank at 3rd floor so i will jave ro use a long wire but if you use wireless modules it will solve that problem. Waiting for your reply.
Thank you so much for your response. You are right.
@@slideas1 so I'm waiting for your next video with these changes. Thanks
@@aydeesam1768 👍
How can i make motor start when water level is high (when water container is full)
Manual switch override
I need circuit diagram
how to download the code
I don't have that black colour cable which is connected to arduino so what should i do...please help i have to show it tomorrow in my college
Which black cable ? Vedio time
9.46
@@shalinisingh3855 dc power supply ....12v 2A .....
Showing no matching function liquid crystal begin()
LCD display eka on wenawa but monawath display wenne nane...? ai e kyl kynna puluwnda...?
Mulinma lcd display thiyana wena program code akak download karala (mage channel eke thiyana (How to make clock wage) balanna hariyanawada kiyala eta passe me code eka upload karanna...
Ehema wenna hethu kipayakma wnna puluwan.....
How to set tank size in code.
And
What is the working of these in code
1) EEPROM
2) State
3) Setvalue
Anyone explain plz?
hllo my
project in running condition but the after some time the jumper wire goes melt
Bro can you send me how you made this project
hello sir...pls help...my lcd display and sensor is not working ....lcd only showing green colour
Re try and watch lcd display Vedios
someone help me how to fix LiquidCrystal_I2C.h: no such file or directory...I already download the Library
Got to lcd libraries link in the description box. Download the zip file. Right click on the downloaded file, click extract all and paste it on, documents>arduino>libraries.
That's it...
Can this be powered by 12v battery?
Yes 👍
can use jsn sr04t ?
අයියේ ගෙදර වතුර ටැංකියට මේක හදද්දි කෝඩ් එකේ වෙනස් කරන්න දේවල් තියේද
ටැංකිය උස අනුව පොඩි වෙනස්කම් කිහිපයක් කලයුතුය්
@@slideas1 ඒ ටික කියන්න පුලුවන්ද අයියේ
How the water is clear water? This device still work?
Yes work
Unfortunately, the background music is very annoying and does not help focus😔
Lcd is not showing anything, I also tried screwing it but the letter are not showing.......help!!! @sl ideas
yes pls .......i am also facing same problem
What volt is relay module
5v
Thanks
New to microcontrollers. Is there a way I could do the reverse and add water to the tank once it hit a low level?
yes
@@xavieralpha2174 how?
@@iamirsaline2376 cool, and you
I have installed lcd i2 library still facing error no matching function
And when i comment lcd.begin()
It works but doesn't upload shows sar can't open device
Please help me fast anyone
use lcd.init()
JUst write in between the two ptracets the LCD type. i.e >>>>> lcd.begin(16, 2); it will work 100%
use lcd begin(16,2)
How can I get code for this?
Code in description ....download
Hello i am interested in buying this project would you like to sell to me ?
90cm usa 500l tank ekakata me code eka harida
Hari
Thanks for this project, but there is a real problem with the HC. SR04 designed like this. How to protect it from humidity coming from water in the long run?
Thankfully, this is a very important issue. Alternatively, only the transmitter and receiver of the ultrasonic sensor (SR04) should be left open and the rest of the circuit should be sealed with water vapor (with a suitable glue or insulating fluid). Experience has shown that this can be used for a longer period of time.
@@slideas1 Thanks , What worries me are the transmitter and receiver of the SR04. I'll take your advice into consideration. Greetings from Algeria
use JSN-SR04 which is waterproof & costs below 500 Rs.
@@adadmohamedcherif192 Use JNS HC04T Waterproof Ultrasonic Sensor this Sensor is better than HC04
plz use a spray one or two cote aerosol paint Lacquer
Can the 220V AC connection be connected a normal plug on a wall? Also how can you put a buzzer on this?
(2)
Hi sir if you need he proper working system plse contact me
If underground tank water level is low ?
please add download link g drive
Bro while uploading code it's showing error about i2c
I know how to rectify
What is this 12c module . Where to buy it . I have only 16*2 LCD display. Are there any other names for this device?
The i2c module can easily activate the lcd display
Sir code not working 😕🙁 please🙏 help
Working
@@slideas1code not working , 5 time try kara mana😓😓
@@slideas1 please help sir
Code error
I have made one, but when water reaches at half position or lower than it can not identify the level, why?
I think you need to adjust the distance in the code according to your tank size.
Your file fore codes are full of virus, can youpost the code here?
Nice project but one thing is missing
Buzzer alarm for low water level
Thank u
Add buzzer and coding for buzzer
@@shakilahmad-jf2xk ok
Plz share your contact number
Bhai
Hi Bro the program code is not matching
On lcd. begin () ;
The error is no matching function for call to Liquid crystal I2C
Can you provide the link of library for this operation
@@sujithsubramanian5357 library include ...download ..