Anduril 2 flashlight UI Easy explanation and mode overview.
ฝัง
- เผยแพร่เมื่อ 13 ก.ค. 2024
- In this video I go over the modes and features of the Anduril 2 user interface for flashlights and how to get the most out of this complicated interface. I go over the basics like on and off. Moonlight and turbo. I then go in the aux colors and lockout modes. I then go into the special features like the strobe low and high, the bike light mode, the candle mode and the lightning storm mode. This light in this video is the Wurrkos TS10 14500 flashlight. Lights from Emisar like the D4V2 and Noctigon KR4 use this same user interface.
I hope you enjoyed the video and like and subscribe if you did.
Thanks and Peace ✌️
#everydaycarry #edc #flashlight #torch - วิทยาศาสตร์และเทคโนโลยี
![ชวนน้องลงทุ่ง - เงาะน้อยเพชรบ้านแพง X น้องมายด์ [ Music Video ] Official Saman Music](http://i.ytimg.com/vi/Bq7Hw9culjE/mqdefault.jpg)
Thank you! Seriously, I nearly threw mine in the garbage due to the incredibly complicated U.I. (Only paid $16.oo for the light, its accessories, charging cable, charger, and 14500 battery.)
Figured, minus the light itself, $16.oo is a good bargain for everything else that came with it. Honestly, too complex for me for EDC purposes. But thanks to you and this video, I now have mine set to how I like it. Loosen the tailcap a bit to _completely_ switch it off. Makes it useful as a good light to keep in my bum bag, or smaller sling bag. Thank you, again.
Interesting! Might have helped to show people the flowchart diagram, perhaps post a link to one. You taught me that the strobe modes were adjustable! Thanks, you got a new sub. If you are ever bored, consider a how and why to adjust the temperature step down point, and what we need to know NOT to do. 😜 Some of the higher settings are a black hole for me. Thanks!
Just got a ts25, and ordered a ts10 for my son and I! Thanks for the video dude!
Thank you so much for that great explanation, it's very handy.
The Wurkkos ts10 for $18 is great value.( I have the blue auxiallry light ) Love the little guy. Looks really nice paired with my Pilar and Roxon M2 for EDC.
I really like my Ts-10
This needed doing thanks for making it painless and easy to understand
Great, thank you👍
Great video! Own two Wurkkos ts10 (operating in simple) but now I am questioning whether I just entered complete nerd mode.
This is what I was looking for. Thanks great vid!
Great video
Dude. Great video ❤️
Very helpful
At 7:40 , that is the Momentary turbo :) ,nice video 🙂
Thankyou
Yeah thats cool but how do i use it as a flashlight??😅
Such a good video! I was struggling with the UI, and this really helped me get the hang of it. One question. It looks like your light doesn't fully turn off (the red aux seems to always glow). mine has the same thing. Do you know if this is supposed to be this way and if it can be turned off?
Hello i.I'm still learning. I was wondering on the wurkkos fc13 I was wondering how to change the color of my button? And does the FC13 have rbg colors for the main led flahslight? Thanks so much
My ts11 is stuck on one color for the auxiliary and I can’t seem to get it to do anything else
How do you think this compares to a FW, asking because they are getting hard to find in certain configurations but they have these in all kinds and the ti/copper looks pretty good to me. If you don't mind
So the led red color is on super lights like you can see in your video. Does that drain the battery faster?
Technically yes, but it is such a small amount that the usability of the lights at night to locate the light outweighs the microscopic difference of the lights being on.
@@JadeGeminiM390 awesome thanks!
Can I set custom brightness levels in basic mode without using ramping?
Seems like a lot of work for figuring out the operation options although it’s pretty cool I don’t think I’d have the patience for all the button pushing!!!!!
Yeah. But you can go as mild or wild as you want to. Plus once you set up once, then your G2G really
Once you figure it out and use it it's super super easy... believe me.its not that complicated.
Can the Red & Orange Aux LED's in full brightness be used for walking around?
The one with blue aux leds can be used to walk around.
@@MrBlackdragon1230 Might as well use the main light instead of blue - red/orange light are useful to preserve night vision
@@SodiumSyndicate That's true. I chose the blue one cuz I wasn't too worried about my night vision. And for the fact that be brighter. But the red would definitely be better for your night vision.
Why doesn’t a reset with 13 clicks turn off the aux lights?
It just wasn’t designed that way. It resets to an almost “Demo” mode to show you all the options. After that, you customize it to your liking.
My ts-10 flashes in lock out mode how can I get it to stay on solid ?
Tap 7 times. Then tap 7 times again. Then Again until it’s solid red
@@JadeGeminiM390 I tried it still flashes
It sounds like it’s still in muggle mode. You need to tap 10 times and hold from the non lock out, ready to turn on mode. Then you should be able to customize your settings. If not, i recommend trying the 13 and hold to reset. Then get it out of muggle mode with 10 clicks hold. I also know early versions of this light had issues with the red LEDs staying on even when the light was on and not responding to programs.
I am following along, but triple click from lock out does not unlock it. It still stays locked. 5:20
It looks like when you unlock it it does not turn on. It just shows a quick flash to indicate it was unlocked. Maybe this is a deeper configuration setting but I prefer that way so like you said it doesn’t come on when you unlock it.
From lock out (4 clicks) 3 clicks unlocks but keeps off. 4 clicks from lockout unlocks and turns on. Maybe the light you have isn’t in advanced modes 10 clicks and hold from off gets you here
would love to get how it really works. can you teach me Steve?
@@JadeGeminiM390 i see you did that, but its not working that way, maybe there are a few different updates to Ardruil, maybe like 2.0.1 and 2.0.2 with minor tweaks / bug fixes. i'll keep looking around. I have the FW3A black, "cool white" maybe its got an earlier version.
@@farre81 on my FW3A version, in candle light mode or normal on mode, click and hold 5 times and you should see a pulse, that's 5 min. on my FWAA if you continue to hold, it will pulse once per second to add +5 min each time. I believe the older ver1 of Anduril it would just set it for 1 hour. try it and see. i'm still learning more about the development of Andruil.
I have a sofrin hs40 and i cant seem to get it to factory reset please help
So another way to reset is unscrew the light until the aux lights power off. Then hold the light switch and keep it held down. While still holding down the button. Tighten the cap fully . Still holding the switch, the light will flicker and then go full turbo then fade off. This has reset the light too.
Is that a white silver?
Color of the light?
I swear my TS10 Judt doesn’t do everything in these example videos likevthis
How do I make the button show battery level ? It only show level when charging.
I tried pushing the button 7 times but it is only blinking when the light is off…
How can I make it show the level ?
Tap 3 times and let go it will show voltage. So 4.2 -4.1 is full. And 3.2 is low. Anything that is 2 blinks is very low.
@@JadeGeminiM390 oh… not possible to show on the switch ?
Thanks for the answer btw
Can this also use a standard non-rechargeable AA battery?
Is there a way to tell what version you would be buying? How did you know you were getting Andural 2? Thanks!
This would depend on the model of light. For example if you bought a Emisar D4V2 from 3 years ago. It might have a 1.0. But something newer that was released in the last 2 years is probably going to have 2.0. The description should always say.
@@JadeGeminiM390 I appreciate the help. Still learning the ins and outs of the softwares.
It's too much
Do your aux lights stay on when the main lights are on? Mine do and it annoys me. That's the only thing I really wish was better because then the light would be perfect imo.
It’s a know issue on earlier models, mine does not
@@JadeGeminiM390 Ah. Wish I waited longer to buy mine then. Thanks for the info!
Warrenty may take care of you
@@Next96300 It was actually just a bug in the anduril firmware. The aux lights were slightly on while the main lights were on, but I used a programmer to update to the latest anduril and it fixed it.
lol turst me i bought a sofirn Q8 plus and its my fist real flashlight and i didnt have a clue about the UI and i thought i ruined it as soon as i got it lol i was so mad sicne im so poor i dont even have a driver licents and never have lol im 36 years old and i never gotten a permit let alone a driver licence lol so yeah when i thought i ruined my 90 dollar flashlight the first 5 minutes that i had it for lol but i didnt it was just confusing to figure out all these modes when ive never seen a flashlight thats uses this type of UI so yeah i was mad but i figured it out and now im happy as hell